The Guitar Geek listing has been removed from the Guitar Database
Try searching :
The comment area has been left below for ongoing discussion of Guitar Geek
Solo Tone Dials
Posted by j on Tue, 01/17/2006 - 20:01.
hey
can anyone help me out with my {guitar) solo tone, im looking for what dials i should try on my amp, im looking for something similar the the soilwork sound.
thanks
looking for wiring schematics for Charvel Fusion IV bass. Came used with some slight electronics problems and I want to do a retrofit. Wiring schematics would be awesome. Anybody know of a repository of guitra/bass schematics?
everyone out there im in need of some help, there is this preacher who just turned 85, who has been looking for his guitar amp for years, and i happened to find it for him in his attic. the only problem is that his amp has no power chord on it, and i need the schematics to see where i need to solder the wire back into it..... the amp is old school it is a "tele-star M12" amp please help if you can thanks alot and god bless
Matt
Posted by Dale Blasingame on Mon, 01/05/2004 - 12:00.
Greetings,
I have an old VOX Pacemaker (solid-state) that has seen little use over the last 30 years. I've cleaned it up and replaced a couple of parts and it works wonderfully... but I'm afraid the footswitch (two-button that controls midrange boost and tremolo) has gone missing.
Here's my (possibly silly) question. Anyone have any idea whether or not the VOX VFS2 footswitch (currently an option for the pathfinder) will work for the Pacemaker? Slim chance, I know. But I was hoping someone might have some knowledge on the subject and perhaps save me the trouble of ordering one and having to send it back if it doesn't work.
Posted by Brian Turshman on Fri, 08/08/2003 - 17:09.
I have a standard mexican stratocaster, and I'd just like to rewire it so that all I have is one pickup and a volume knob. I tried it the other day and failed. Thanks for the help
Hi everyone. I really need some help with my guitar but I know very little about electronics. Any advice that anyone here could give me would sure be appreciated.
I have a typical fender strat/squir. The problem with it is that the ground wire on my output jack disconnected. When I unscrewed the jack to take a look at it the main wire disconnected. I was thinking about sodering them back on to the jack but the ground wire was too short. With some wire cutters I tried to get some of the rubber lining off so I could have some more wire. Unfortunately the wire is so small that I couldn't do it. My friend had this nifty little trick of burning the rubber off but he burnt all of the rubber on the ground wire. So now instead of having a regular connection and a ground wire, I just have one big wire. Well that didn't stop my from trying to soder some of the wire to the main connection and some of the wire to the ground. After I got done I tried my guitar out but I'm still getting no sound.
I need schematics of a Vox Cambridge Reverb...The ones that I have found are a Cambridge Reverb with a total of 6-12ax7's...... but the one I have has 3-12ax7, 1-12au7,2-el84 and 1-6ca4...am I reading the schematic wrong???????
Anyone out there know where I can find schematics for the Vox pacemaker Solid State model... for just about a year i'm trying to find the schematic ... thanks in advance ....
: Anyone out there know where I can find schematics for the Vox pacemaker Solid State model... for just about a year i'm trying to find the schematic ... thanks in advance ....
Absolutely. Try http://www.schematicheaven.com . I found a newly drawn pdf in the Vox section. Also there are lots of other schematics as the name implies. When I need a schem, I check them first.
: Anyone out there know where I can find schematics for the Vox pacemaker Solid State model... for just about a year i'm trying to find the schematic ... thanks in advance ....
----------------
I'll look at my local vintage dealer. Do you or anyone you know need another Pacemaker Solid State? I have one that I'm about to put on Ebay.
the wiring in my squire 2 p-bass is messed up. i need help with it and anyone who can give me a schematic or a hint or a web page or whatever would be greatly appreciated.
chuck
Posted by Charlie Busby on Tue, 08/13/2002 - 11:28.
: the wiring in my squire 2 p-bass is messed up. i need help with it and anyone who can give me a schematic or a hint or a web page or whatever would be greatly appreciated.
: chuck
Same here I'd like to get a copy of the wiring shcematic If you find one
Posted by Marty J. Hodulick on Sun, 06/17/2001 - 02:37.
Hello Guitar Geek:
I am a technician/guitarist and I am looking for a schematic to repair
my on-board compressor in my 370/12/RM Ltd. Edition Rickenbacker 12-
string, please help! Sincerely, Marty J. Hodulick,(mlhod@go.com)
Difference between y.malmsteen strat USA and japan
Posted by thomas trunschke on Sat, 06/02/2001 - 13:09.
Hallo
I"ve got a Yngwie malmsteen Strat.with a serial number SZO178636.
My question is ,is it a USA or an Japan produkt?
In the store they sad it is Usa,I hope so?>???????????
Posted by D Harrington on Sun, 02/18/2001 - 06:09.
I own a two pickup, two volume, one tone, passive electronic bass, and I want to rewire it to have a Master volume, pickup blend and tone knobs. Does anyone know how to do this ?
Any sites with good schematics?
: I own a two pickup, two volume, one tone, passive electronic bass, and I want to rewire it to have a Master volume, pickup blend and tone knobs. Does anyone know how to do this ?
: Any sites with good schematics?
: Thanks in advance.
You should check out Anderton's "Electronic projects for musicians" for the Blend Control. It's actually more complicated to do then you might think. You technically need a log/antilog taper pot, but Anderton shows a way to get around this. The book is a good reference to have around anyway. (check the library, its a popular book)
Hi,
I have got a japanese Yngwie Malmsteen guitar and I want to change the original hardware (pick-ups, etc)for the american Malmsteen ( DiMarzio pick ups, etc) but I need the schematic to conect them correctly.
Can you help me?
: i have an schematic diagram stratocaster for malmsteen... i u want guys just mail me... i will send it right away..
: I am just here to help, im a big fun of yngwie malmsteen i like his warm shred guitar sound.../////////Hey Yea send me the SCHEMATIC. ................THANKS
: : Hi,
: : I have made a gibson guitar it's a custom and I have DiMarzio pick ups , but I need the schematic to conect them correctly.
: : Can you help me?
First you have to learn how to spell connect! Then pull off the cover change the pickups by wiring them exactly the way they are already, wire for wire.
Posted by giulio rossi on Fri, 11/17/2000 - 20:28.
: Hi,
: I have got a japanese Yngwie Malmsteen guitar and I want to change the original hardware (pick-ups, etc)for the american Malmsteen ( DiMarzio pick ups, etc) but I need the schematic to conect them correctly.
: Can you help me?
Solo Tone Dials
hey
can anyone help me out with my {guitar) solo tone, im looking for what dials i should try on my amp, im looking for something similar the the soilwork sound.
thanks
: Charvel Fusion IV schematics
looking for wiring schematics for Charvel Fusion IV bass. Came used with some slight electronics problems and I want to do a retrofit. Wiring schematics would be awesome. Anybody know of a repository of guitra/bass schematics?
MXR Dime Distortion DD-11 schematics
This popular thread has been given its own page : MXR Dime Distortion DD-11 schematics
jekyll & Hyde
if some one has info or the schematics on this pedal i'll be very grate full
old school tele-star amp schematics
everyone out there im in need of some help, there is this preacher who just turned 85, who has been looking for his guitar amp for years, and i happened to find it for him in his attic. the only problem is that his amp has no power chord on it, and i need the schematics to see where i need to solder the wire back into it..... the amp is old school it is a "tele-star M12" amp please help if you can thanks alot and god bless
Matt
schematics fender power chorus
recherche schema pour fender power chorus merci d,avance
VOX pacemaker
Greetings,
I have an old VOX Pacemaker (solid-state) that has seen little use over the last 30 years. I've cleaned it up and replaced a couple of parts and it works wonderfully... but I'm afraid the footswitch (two-button that controls midrange boost and tremolo) has gone missing.
Here's my (possibly silly) question. Anyone have any idea whether or not the VOX VFS2 footswitch (currently an option for the pathfinder) will work for the Pacemaker? Slim chance, I know. But I was hoping someone might have some knowledge on the subject and perhaps save me the trouble of ordering one and having to send it back if it doesn't work.
thanks,
db
vox astro iv bass
This popular thread has been given its own page : vox astro iv bass
rewiring a strat
I have a standard mexican stratocaster, and I'd just like to rewire it so that all I have is one pickup and a volume knob. I tried it the other day and failed. Thanks for the help
Maitenence Help!
Hi everyone. I really need some help with my guitar but I know very little about electronics. Any advice that anyone here could give me would sure be appreciated.
I have a typical fender strat/squir. The problem with it is that the ground wire on my output jack disconnected. When I unscrewed the jack to take a look at it the main wire disconnected. I was thinking about sodering them back on to the jack but the ground wire was too short. With some wire cutters I tried to get some of the rubber lining off so I could have some more wire. Unfortunately the wire is so small that I couldn't do it. My friend had this nifty little trick of burning the rubber off but he burnt all of the rubber on the ground wire. So now instead of having a regular connection and a ground wire, I just have one big wire. Well that didn't stop my from trying to soder some of the wire to the main connection and some of the wire to the ground. After I got done I tried my guitar out but I'm still getting no sound.
What the hell can I do to fix this?
GUITAR EFFECTS
HI I'M A EFFECTS DESIGNER I WANT TO CONTACT PEOPLE FOR CHANGE SCHEMATICS INFORMATION AND OTHERS I HAVE A LOT OF SCHEMATICS,MAIL ME BYE
60- 70's Vox cambridge Reverb
I need schematics of a Vox Cambridge Reverb...The ones that I have found are a Cambridge Reverb with a total of 6-12ax7's...... but the one I have has 3-12ax7, 1-12au7,2-el84 and 1-6ca4...am I reading the schematic wrong???????
Vox Bass Guitar
I have a Vox Bass guitar(Teardrop)-I believe it was manufactured in the late 60's. How can I find more info on it?
Re: Vox Bass Guitar
http://www.voxshowroom.com/us/guitar/wyman.html
: I have a Vox Bass guitar(Teardrop)-I believe it was manufactured in the late 60's. How can I find more info on it?
Vox pacemaker
Anyone out there know where I can find schematics for the Vox pacemaker Solid State model... for just about a year i'm trying to find the schematic ... thanks in advance ....
Re: Vox pacemaker
: Anyone out there know where I can find schematics for the Vox pacemaker Solid State model... for just about a year i'm trying to find the schematic ... thanks in advance ....
Absolutely. Try http://www.schematicheaven.com . I found a newly drawn pdf in the Vox section. Also there are lots of other schematics as the name implies. When I need a schem, I check them first.
Re: Vox pacemaker
: Anyone out there know where I can find schematics for the Vox pacemaker Solid State model... for just about a year i'm trying to find the schematic ... thanks in advance ....
----------------
I'll look at my local vintage dealer. Do you or anyone you know need another Pacemaker Solid State? I have one that I'm about to put on Ebay.
sound effect section
Where is it?
fender ajzz abss schematics
i need to get ahold of some fender jazz basss schematics help me out
schematics power chorus
Anyone out there know where I can find schematics for the Fender Power Chorus amp. help would be much appreciated.
Thanks
Re: schematics power chorus
: Anyone out there know where I can find schematics for the Fender Power Chorus amp. help would be much appreciated.
: Thanks
Re: schematics Fender Twin 2100
: : Anyone out there know where I can find schematics for the Fender Power Chorus amp. help would be much appreciated.
: : Thanks
Re: schematics power chorus
: Anyone out there know where I can find schematics for the Fender Power Chorus amp. help would be much appreciated.
: Thanks
Re: schematics power chorus
Yo! fun...
i like it :)
John
<a href="http://www.toshain.com">painting</a>
Re: schematics power chorus
i'm french, excuse me i don't speak english....
thank you
Re: schematics power chorus
: i'm french, excuse me i don't speak english....
: thank you
Re: schematics power chorus
: : i'm french, excuse me i don't speak english....
: : thank you
gonderin abicim yaaaw
hi
do you have eny guitars for sail
thankyou!
fender precision squire 2 bass
the wiring in my squire 2 p-bass is messed up. i need help with it and anyone who can give me a schematic or a hint or a web page or whatever would be greatly appreciated.
chuck
Re: fender precision squire 2 bass
: the wiring in my squire 2 p-bass is messed up. i need help with it and anyone who can give me a schematic or a hint or a web page or whatever would be greatly appreciated.
: chuck
Same here I'd like to get a copy of the wiring shcematic If you find one
Re: fender precision squire 2 bass
The Squire website has schematics for all there products. Hope that helps (Sorry, I forget the site name)
Rick Compressor Schematic
Hello Guitar Geek:
I am a technician/guitarist and I am looking for a schematic to repair
my on-board compressor in my 370/12/RM Ltd. Edition Rickenbacker 12-
string, please help! Sincerely, Marty J. Hodulick,(mlhod@go.com)
Difference between y.malmsteen strat USA and japan
Hallo
I"ve got a Yngwie malmsteen Strat.with a serial number SZO178636.
My question is ,is it a USA or an Japan produkt?
In the store they sad it is Usa,I hope so?>???????????
VOX
Hello!
I need VOX AC15 and AC30 SCHEMATICS.
THANKS!
Re: VOX
: Hello!
: I need VOX AC15 and AC30 SCHEMATICS.
: THANKS!
I can provide you some schematics of VOX AC15 (I own one myself).
Re: VOX
: : Hello!
: : I need VOX AC15 and AC30 SCHEMATICS.
: : THANKS!
: I can provide you some schematics of VOX AC15 (I own one myself).
Does anyone have a schematic for a JMI AC15 twin?
VOX
Hello!
I need VOX AC15 and AC30 SCHEMATICS.
THANKS!
VOX
Hello!
I need VOX AC15 and AC30.
THANKS!
VOX
Hello!
I need VOX AC15 and AC30.
THANKS!
Pickup Blend/Master volume Bass rewiring
I own a two pickup, two volume, one tone, passive electronic bass, and I want to rewire it to have a Master volume, pickup blend and tone knobs. Does anyone know how to do this ?
Any sites with good schematics?
Thanks in advance.
Re: Pickup Blend/Master volume Bass rewiring
: I own a two pickup, two volume, one tone, passive electronic bass, and I want to rewire it to have a Master volume, pickup blend and tone knobs. Does anyone know how to do this ?
: Any sites with good schematics?
: Thanks in advance.
You should check out Anderton's "Electronic projects for musicians" for the Blend Control. It's actually more complicated to do then you might think. You technically need a log/antilog taper pot, but Anderton shows a way to get around this. The book is a good reference to have around anyway. (check the library, its a popular book)
Fender Jazz Bass schematic
This popular thread has been given its own page : Fender Jazz Bass schematic
yngwie malmsteen fender schematic
Hi,
I have got a japanese Yngwie Malmsteen guitar and I want to change the original hardware (pick-ups, etc)for the american Malmsteen ( DiMarzio pick ups, etc) but I need the schematic to conect them correctly.
Can you help me?
Re: yngwie malmsteen fender schematic
i have an schematic diagram stratocaster for malmsteen... i u want guys just mail me... i will send it right away..
I am just here to help, im a big fun of yngwie malmsteen i like his warm shred guitar sound...
Re: yngwie malmsteen fender schematic
: i have an schematic diagram stratocaster for malmsteen... i u want guys just mail me... i will send it right away..
: I am just here to help, im a big fun of yngwie malmsteen i like his warm shred guitar sound.../////////Hey Yea send me the SCHEMATIC. ................THANKS
Re: yngwie malmsteen fender schematic
: Hi,
: I have made a gibson guitar it's a custom and I have DiMarzio pick ups , but I need the schematic to conect them correctly.
: Can you help me?
gibson custom with 4 tone
: : Hi,
: : I have made a gibson guitar it's a custom and I have DiMarzio pick ups , but I need the schematic to conect them correctly.
: : Can you help me?
Re: yngwie malmsteen fender schematic
First you have to learn how to spell connect! Then pull off the cover change the pickups by wiring them exactly the way they are already, wire for wire.
Re: yngwie malmsteen fender schematic
: Hi,
: I have got a japanese Yngwie Malmsteen guitar and I want to change the original hardware (pick-ups, etc)for the american Malmsteen ( DiMarzio pick ups, etc) but I need the schematic to conect them correctly.
: Can you help me?
Re: yngwie malmsteen fender schematic
: : Hi,
: : would you give me schematic solid body and neck schematic of Yngwie Malmsteen guitar
: : Can you help me?
Post new comment