It is one of the best up todate Zoom effects sites on the net it has everything your will want or need to know about zoom.
883 thoughts on “Zoom Effects”
Schematic Diagram of 707 II
Eric
Hi everyone, good day to all.
I’d like to ask help from anyone who has a schematic diagram of a Zoom 707II, as mine has conked out on me, seems to be a voltage regulator issue as it works properly when I reduce the voltage of the power supply but the lights and the display acts weird when on 9 volts or runs on the 6 volt batteries.
: I’d like to ask help from anyone who has a schematic diagram of a Zoom 707II, as mine has conked out on me, seems to be a voltage regulator issue as it works properly when I reduce the voltage of the power supply but the lights and the display acts weird when on 9 volts or runs on the 6 volt batteries.
: Thanks, any help will be appreciated.
you all suck massive hairy man berrys
Re: ZOOM GFX% PATCHES----> i need them, pls, if u have a page... pls send it to my mail
fast eric
Hi in regards to the GFX5 patches, have you tried dowloading patches for the Ggfx8 as the gfx5 is really just a cut down version of this pedal this website may help as i have used some of these settings to great effect{pardon the pun} http://www.fineclaymatrix.co.uk/phorum/
My 9030 has a wrecked controller (# 2, right corner) so that I´m not able to edit a few parameter. Does anybody know where I can get such a potentiometer (ALPS)?
: : : Please can u tell me if the is a manual for zoom 707 II on the internet that is NOT in .pdf formatt. PLEASE!!! if it goes in the Portuguese language it is still better!!! if it doesn’t go in the Portuguese language doesn’t have problem, it can order even so. The important is that it is not in the .pdf formatt.
: : : Please can u tell me if the is a manual for zoom 707 on the internet that is NOT in .pdf formatt. PLEASE!!! if it goes in the Portuguese language it is still better!!! if it doesn’t go in the Portuguese language doesn’t have problem, it can order even so. The important is that it is not in the .pdf formatt.
Hi just got 707 2 but have no clue what to do so any help would be great also could anyone send me some new patches to load via smart media i,m into all music styles so any will do thanx tony.
I need some help. I have had my Zoom 3030 since ’97 and now I am at a delima. It will not power up. I have replaced the ac jack already with no luck. Anyone else have similar problems or maybe know what I should do to fix my 3030? Thanks
Your plug on the 3030 is ovously bad! here’s the fix, I did it on mine and it worked! Buy a soldering iron and some solder and take the power plug off from the circuit board. buy a new acadapter plug that is the right size for the ac adaptor, and then solder it with some wires. then mount it with some screws on the unit itself, easy fix!
I’ve got the same problem. Had it since ’97 and now it wont power up. Im sure the powersupply is good. I’ve got some great memories with this thing and I really dont want to trash it. I’d love to hear some idea’s as to what I could do…
I need SOME sittingS TO MY ZOOM 3030 TO REFRESH MY SITTING
hamdy galal
: I need some help. I have had my Zoom 3030 since ’97 and now I am at a delima. It will not power up. I have replaced the ac jack already with no luck. Anyone else have similar problems or maybe know what I should do to fix my 3030? Thanks
My zoom 9000 comes on, but there’s no sound coming out of it. Any suggestions as to where I could get it repaired, or what’s wrong with it. Please help? Thanks.
: My zoom 9000 comes on, but there’s no sound coming out of it. Any suggestions as to where I could get it repaired, or what’s wrong with it. Please help? Thanks.
Mine does this too, you probably need to open it and replace the little lithium battery. It’s soldered on which is a pain. I *think* it’s a CR2032 but I might be wrong… email me back if you find out.
: My zoom 9000 comes on, but the Power light Blinks as if there’s and error. I plug a jack into the in/power and get no sound (IE: Guitar). I can mix in with another instrument and here it, but I can’t hear the Main instrument plugged inot In/Power. I need the schematic so I can do some troubleshooting.
Your sound depends on everything from your fingering style to your grille cloth, but On a Kubicki Factor 5 with Bartolini’s through a Bantam Bass, I set up bank A clean vintage, bank B slap ‘verb, bank C chorus, bank D drive, bank E echo/jet, bank F funk/blues like this:
A1…C1..VT..16..9..29..00..R1..27
A2…L3..VT..25..5..39..00..R3..25
A3…00..VT..22..6..37..00..H1..26
A4…R2..VT..18..6..23..01..R4..26
B1…C8..SL..18..6..43..00..R1..25
B2…L2..SL..22..5..11..C1..R2..25
B3…L5..SL..16..5..19..F3..D1..22
B4…C2..SL..15..6..P3..00..R3..26
C1…L3..C2..10..6..20..C5..H5..22
C2…C4..FT..24..6..47..C2..00..22
C3…R6..VT..05..6..19..C6..R8..25
C4…L4..C2..15..5..23..07..D1..22
etc…
I have to flatten the eq & not use any active
boost on the Kubicki or it tends to get thick
and muddy but these settings sound real great
when I switch to my Fender MB-5 with EMG sel.
******(American Custom, NOT Jap Squire)******
Of course, if you change bass, amp or speaker,
you will want to tweak the amp#,eq, & level to
maximize your tone. You can spend the buck$$$
to try and imitate someone’s rig and sound,but
It makes more sen$e to buy what YOURE drawn to
and then work with it to get the best sound &
tone you can out of that: YOUR sound!
I lost my instructions to my petal. Would someone e-mail the directions to me please? Thank you. Tom
: Your sound depends on everything from your
pick to your grille cloth, but On an American Standard Strat with tex-mex through a Bantam Bass, I set up bank A clean, bank B ‘verb, bank C chorus, bank D drive, bank E echo/jet, bank F funk/blues like this:
: A1…L1..LD..26..7..24..00..H3..24
: A2…L6..00..–..6..40..C5..D7..25
: A3…C3..LD..13..6..22..P4..H3..22
: A4…00..NT..26..6..45..PD..R1..25
: B1…C2..OD..18..4..26..00..H3..23
: B2…A2..BL..22..5..24..C3..H1..23
: B3…L7..00..–..1..P6..00..D2..25
: B4…A3..00..–..2..09..P6..D3..25
: C1…C2..BL..20..7..25..00..R4..24
: C2…C3..RY..01..1..35..C3..H5..26
: C3…L2..AC..24..5..23..D3..00..23
: C4…L4..00..–..2..36..F7..D6..24
: etc…
: Of course, if your guitar, amp, or speaker changes, you will want to tweak the amp#, eq, & level settings to optimize your tone.
It’s not about that,dump asss, it’s about EFFECTS. You can do alot more if you have special sound effects on your guitar.Anyways…i have my Zoom 505II pedal now for a couple of years and the sound is getting kinda old…I like the pedal very much but I just need a good distortion preset if anyone got any writen down…I spend hours on my pedal and just cant seem to get i nice one.
Re: This popular thread has been given its own page :... galadhon
galadhon
Your sound depends on everything from your pick to your grille cloth, but On an American Standard Strat with tex-mex through a Bantam Bass, I set up bank A clean, bank B ‘verb, bank C chorus, bank D drive, bank E echo/jet, bank F funk/blues like this:
A1…L1..LD..26..7..24..00..H3..24
A2…L6..00..–..6..40..C5..D7..25
A3…C3..LD..13..6..22..P4..H3..22
A4…00..NT..26..6..45..PD..R1..25
B1…C2..OD..18..4..26..00..H3..23
B2…A2..BL..22..5..24..C3..H1..23
B3…L7..00..–..1..P6..00..D2..25
B4…A3..00..–..2..09..P6..D3..25
C1…C2..BL..20..7..25..00..R4..24
C2…C3..RY..01..1..35..C3..H5..26
C3…L2..AC..24..5..23..D3..00..23
C4…L4..00..–..2..36..F7..D6..24
etc…
Of course, if your guitar, amp, or speaker changes, you will want to tweak the amp#, eq, & level settings to optimize your tone.
Is there a company or support group or whatever that handles the parts necessary to fix the 9002? I’m not talking about the ZOOM company itself because they seem to have little interest in their dinosaur products.
Zoom 508 Delay Need Instructions or a copy of the book
jerry howard
Hi i bought a Zoom 508 Delay box i have no ideal how to set it if any one has a copy of the instructions or a manual please let me know.if you have a manuel that you want to sell let me know.Thanks
how to store my rythm with drum effect,n play it back zoom 707series2
est the drum rythm,play my rythm,save it,then playback,my lead with the rytm i saved ,n save both lead n rythm…howwww
can anyone help? i recently had to remove the backing plate from my effects pedal, problem is the relocation of several small springs between circuit board and back plate.
since reassembly, i get more static and i am concerned that i have botched up the location of these springs.
: can anyone help? I have lost my book to my zoom gfx707 I really need help figuring out how to program I need the book but can’t even find one on line
This may be a little too late, but if you go to the zoom homepage, you can download the manual in PDF format
I have the same problem, a smok’in resister! Did you ever find a source for the schematic or the value of the resistor? I’m guessing it’s a 1/4 watt resistor and if you subsitute a 1/2 watt of the same value it should cure the problem.
:I have exactly the same problem with the zoom 606. I guess the value of the resistor will be more or less the same. The 29m33 transistor could also be damaged but I’ll first try just the resistor. Thanks for the help
i have bought a 2nd hand 9010 without manual. i figured most of he functions out except getting he control pedals to work or mother midi control devices please help me
Here are the 9000 series manuals, also 5000 and 7010
Better get yours while they’re up – thanks to the previous poster on this page who gave the address. Finally got my ValveFX / 9150 / Vortex combo to "play nice in the sandbox"
=D http://www.zoom.co.jp/archive/Previous_Model/
I am probably doing this wrong. But I am taking a shot. I have been trying to get the schematic for my Zoom 9000 effects but even the company won’t help me out. After a year and a half I am getting quite frustrated. I love my effects and I miss my effects. I need my effects. Please someone help me!!
Thanks for posting this! I’ll spread the word on the HC Effects Forum. I’m sure there are more old Zoom fans that’ll appreciate it.
Thanks from me & my 9002…
-Mark
My Zoom 9000 is behaving a little strange. You can switch it on, set it, use it and all; but when you switch it off, you won’t be able re-using it for about an hour. It just doesn’t want to switch on again. Anyway, it is fully operational, it even holds your memories. Zoom assistance said it isn’t worth repairing, but I’m a son of a gun…
If you had a manual, too…
Than you everybody
I tried to start up my 9000 last night, and it doesn’t even get powered up at all. I tried both ac adapter and batteries, to no avail. Does anybody have any ideas what’s wrong with my zoom? Thanks in advance
: I just had the same proble. It comes probably because of dont use it enought. If you tried to put brand new battery, and let it rest for a while, after that just plug a jack, and wait a while again. It while be alive again…
: necesito que me ayuden a conseguir los manuales de la pedalera zoom 2020, se me han borrado todos los efectos y no tengo manera de poder recuperarlos , gracias
Can anyone tell me the milliamperage(mA) of the Zoom 9000 adapter? Also, I’m trying to find a PDF of the manual for this unit. Been to the Zoom site and the manuals only go to the 8080 model.
i use a normal AC adapter with 7.5V and 300mA max. no problem with that. didn’t burn it 😉
: Can anyone tell me the milliamperage(mA) of the Zoom 9000 adapter? Also, I’m trying to find a PDF of the manual for this unit. Been to the Zoom site and the manuals only go to the 8080 model.
Hi everyone, good day to all.
I’d like to ask help from anyone who has a schematic diagram of a Zoom 707II, as mine has conked out on me, seems to be a voltage regulator issue as it works properly when I reduce the voltage of the power supply but the lights and the display acts weird when on 9 volts or runs on the 6 volt batteries.
Thanks, any help will be appreciated.
: Hi everyone, good day to all.
: I’d like to ask help from anyone who has a schematic diagram of a Zoom 707II, as mine has conked out on me, seems to be a voltage regulator issue as it works properly when I reduce the voltage of the power supply but the lights and the display acts weird when on 9 volts or runs on the 6 volt batteries.
: Thanks, any help will be appreciated.
you all suck massive hairy man berrys
ZOOM GFX5 PATCHES—-> i need them, pls, if u have a page… pls send it to my mail -gfx 5 gfx 5
: ZOOM GFX 8 PATCHES—-> i need them, pls, if u have a page… pls send it to my mail -gfx 8 gfx 8
Hi in regards to the GFX5 patches, have you tried dowloading patches for the Ggfx8 as the gfx5 is really just a cut down version of this pedal this website may help as i have used some of these settings to great effect{pardon the pun}
http://www.fineclaymatrix.co.uk/phorum/
pls i need patches for my zoom gfx 5– send a link to—> [email protected]
pls i need patches for my zoom gfx 5– send a link to—> [email protected]
My 9030 has a wrecked controller (# 2, right corner) so that I´m not able to edit a few parameter. Does anybody know where I can get such a potentiometer (ALPS)?
: : : Please can u tell me if the is a manual for zoom 707 II on the internet that is NOT in .pdf formatt. PLEASE!!! if it goes in the Portuguese language it is still better!!! if it doesn’t go in the Portuguese language doesn’t have problem, it can order even so. The important is that it is not in the .pdf formatt.
: : : Please can u tell me if the is a manual for zoom 707 on the internet that is NOT in .pdf formatt. PLEASE!!! if it goes in the Portuguese language it is still better!!! if it doesn’t go in the Portuguese language doesn’t have problem, it can order even so. The important is that it is not in the .pdf formatt.
Hello friend!!! Please send for my e-mail patches for processor of guitar zoom 707 II.
: I need to know how to use the OOM 707 Guitar pedal. Could you send me electronically an instruction manual, please?
Thanks!1
Hi just got 707 2 but have no clue what to do so any help would be great also could anyone send me some new patches to load via smart media i,m into all music styles so any will do thanx tony.
anyone got an instruction manual for a zoom gfx 1, just brought one and it doesn’t have a manual
: anyone got an instruction manual for a zoom gfx 1, just brought one and it doesn’t have a manual
http://www.zoom.co.jp/english/ then click on downloads, then on manuals
I took some pictures of the capacitors I replaced to fix my Zoom 9002 and posted them to my website along with other 9002 information. Hope it helps!
http://home.comcast.net/~mmph/Zoom/Zoom_9002_repair.html
-Mark
how to use zoom gfx-5?
Could anyone tell me the "correct" patches for
sultans of swing or other dire straits songs?
i need a manual
: i need a manual for zoom 7010 in spanish
thanks
: i need a manual
: : i need a manual
mail to samsontech, they will send you one like they did to me.
I need some help. I have had my Zoom 3030 since ’97 and now I am at a delima. It will not power up. I have replaced the ac jack already with no luck. Anyone else have similar problems or maybe know what I should do to fix my 3030? Thanks
Your plug on the 3030 is ovously bad! here’s the fix, I did it on mine and it worked! Buy a soldering iron and some solder and take the power plug off from the circuit board. buy a new acadapter plug that is the right size for the ac adaptor, and then solder it with some wires. then mount it with some screws on the unit itself, easy fix!
I’ve got the same problem. Had it since ’97 and now it wont power up. Im sure the powersupply is good. I’ve got some great memories with this thing and I really dont want to trash it. I’d love to hear some idea’s as to what I could do…
: I need some help. I have had my Zoom 3030 since ’97 and now I am at a delima. It will not power up. I have replaced the ac jack already with no luck. Anyone else have similar problems or maybe know what I should do to fix my 3030? Thanks
My zoom 9000 comes on, but there’s no sound coming out of it. Any suggestions as to where I could get it repaired, or what’s wrong with it. Please help? Thanks.
: My zoom 9000 comes on, but there’s no sound coming out of it. Any suggestions as to where I could get it repaired, or what’s wrong with it. Please help? Thanks.
Mine does this too, you probably need to open it and replace the little lithium battery. It’s soldered on which is a pain. I *think* it’s a CR2032 but I might be wrong… email me back if you find out.
: My zoom 9000 comes on, but the Power light Blinks as if there’s and error. I plug a jack into the in/power and get no sound (IE: Guitar). I can mix in with another instrument and here it, but I can’t hear the Main instrument plugged inot In/Power. I need the schematic so I can do some troubleshooting.
I need an instruction manual for a zoom GFX707 guitar effects processor. Is thier anywhere to download it?
Your sound depends on everything from your fingering style to your grille cloth, but On a Kubicki Factor 5 with Bartolini’s through a Bantam Bass, I set up bank A clean vintage, bank B slap ‘verb, bank C chorus, bank D drive, bank E echo/jet, bank F funk/blues like this:
A1…C1..VT..16..9..29..00..R1..27
A2…L3..VT..25..5..39..00..R3..25
A3…00..VT..22..6..37..00..H1..26
A4…R2..VT..18..6..23..01..R4..26
B1…C8..SL..18..6..43..00..R1..25
B2…L2..SL..22..5..11..C1..R2..25
B3…L5..SL..16..5..19..F3..D1..22
B4…C2..SL..15..6..P3..00..R3..26
C1…L3..C2..10..6..20..C5..H5..22
C2…C4..FT..24..6..47..C2..00..22
C3…R6..VT..05..6..19..C6..R8..25
C4…L4..C2..15..5..23..07..D1..22
etc…
I have to flatten the eq & not use any active
boost on the Kubicki or it tends to get thick
and muddy but these settings sound real great
when I switch to my Fender MB-5 with EMG sel.
******(American Custom, NOT Jap Squire)******
Of course, if you change bass, amp or speaker,
you will want to tweak the amp#,eq, & level to
maximize your tone. You can spend the buck$$$
to try and imitate someone’s rig and sound,but
It makes more sen$e to buy what YOURE drawn to
and then work with it to get the best sound &
tone you can out of that: YOUR sound!
This popular thread has been given its own page : Zoom 505 Presets
I lost my instructions to my petal. Would someone e-mail the directions to me please? Thank you. Tom
: Your sound depends on everything from your
pick to your grille cloth, but On an American Standard Strat with tex-mex through a Bantam Bass, I set up bank A clean, bank B ‘verb, bank C chorus, bank D drive, bank E echo/jet, bank F funk/blues like this:
: A1…L1..LD..26..7..24..00..H3..24
: A2…L6..00..–..6..40..C5..D7..25
: A3…C3..LD..13..6..22..P4..H3..22
: A4…00..NT..26..6..45..PD..R1..25
: B1…C2..OD..18..4..26..00..H3..23
: B2…A2..BL..22..5..24..C3..H1..23
: B3…L7..00..–..1..P6..00..D2..25
: B4…A3..00..–..2..09..P6..D3..25
: C1…C2..BL..20..7..25..00..R4..24
: C2…C3..RY..01..1..35..C3..H5..26
: C3…L2..AC..24..5..23..D3..00..23
: C4…L4..00..–..2..36..F7..D6..24
: etc…
: Of course, if your guitar, amp, or speaker changes, you will want to tweak the amp#, eq, & level settings to optimize your tone.
lean how to play with your ears and fingers not with digital that comes last the real skill is in ya heart
: lean how to play with your ears and fingers not with digital that comes last the real skill is in ya heart
It’s not about that,dump asss, it’s about EFFECTS. You can do alot more if you have special sound effects on your guitar.Anyways…i have my Zoom 505II pedal now for a couple of years and the sound is getting kinda old…I like the pedal very much but I just need a good distortion preset if anyone got any writen down…I spend hours on my pedal and just cant seem to get i nice one.
Your sound depends on everything from your pick to your grille cloth, but On an American Standard Strat with tex-mex through a Bantam Bass, I set up bank A clean, bank B ‘verb, bank C chorus, bank D drive, bank E echo/jet, bank F funk/blues like this:
A1…L1..LD..26..7..24..00..H3..24
A2…L6..00..–..6..40..C5..D7..25
A3…C3..LD..13..6..22..P4..H3..22
A4…00..NT..26..6..45..PD..R1..25
B1…C2..OD..18..4..26..00..H3..23
B2…A2..BL..22..5..24..C3..H1..23
B3…L7..00..–..1..P6..00..D2..25
B4…A3..00..–..2..09..P6..D3..25
C1…C2..BL..20..7..25..00..R4..24
C2…C3..RY..01..1..35..C3..H5..26
C3…L2..AC..24..5..23..D3..00..23
C4…L4..00..–..2..36..F7..D6..24
etc…
Of course, if your guitar, amp, or speaker changes, you will want to tweak the amp#, eq, & level settings to optimize your tone.
I need zoom 707 II patches, thanks for helping.
: I need zoom 707 II manual thanks for helping.
i need patches for my zoom 707 II pedal for kool and the gang, Santana, Jimmy Page. help please!!! Thanks
: i need patches for my zoom 707 II pedal for bryan adams, dominic miller & rush (i used fender strat). help please! Thanks.
: I need zoom 707 II patches, like santana ,hardcore ,metal .thanks for helping.
Is there a company or support group or whatever that handles the parts necessary to fix the 9002? I’m not talking about the ZOOM company itself because they seem to have little interest in their dinosaur products.
Hi i bought a Zoom 508 Delay box i have no ideal how to set it if any one has a copy of the instructions or a manual please let me know.if you have a manuel that you want to sell let me know.Thanks
Looking to purchase a second 508 for home use. There are a few around but if u are unterested in selling let me know. Thanks, Robert.
how to store my rythm with drum effect,n play it back zoom 707series2
est the drum rythm,play my rythm,save it,then playback,my lead with the rytm i saved ,n save both lead n rythm…howwww
I am looking for a manual for the Zoom Fire 7010. If anyone can tell me how to get a free manual or tell me any information, it would be most helpful.
Thanks
Wayne
can anyone help? i recently had to remove the backing plate from my effects pedal, problem is the relocation of several small springs between circuit board and back plate.
since reassembly, i get more static and i am concerned that i have botched up the location of these springs.
can anyone help? I have lost my book to my zoom gfx707 I really need help figuring out how to program I need the book but can’t even find one on line
: can anyone help? I have lost my book to my zoom gfx707 I really need help figuring out how to program I need the book but can’t even find one on line
This may be a little too late, but if you go to the zoom homepage, you can download the manual in PDF format
Does anyone know of any patches for the Zoom 3000 that sound like Trey Anastasio or Jerry Garcia?
I need a user manual for a ZOOM PLAYER 2100.
please help
mike
: I need a user manual for a ZOOM PLAYER 2100.
: please help
: mike
Answer: Here is the manual. Enjoy!
http://www.zoom.co.jp/archive/English_Manual/E_2100.pdf
This popular thread has been given its own page : zoom 505 schematics needed
: My zoom 505 is down. I need schematics for to find the characteristics for the resistor which probably had burned. Please help me out. Daimonion
please send scematic duagram zoom 707
I have the same problem, a smok’in resister! Did you ever find a source for the schematic or the value of the resistor? I’m guessing it’s a 1/4 watt resistor and if you subsitute a 1/2 watt of the same value it should cure the problem.
: My zoom 505 is down. I need schematics for to find the characteristics for the resistor which probably had burned. Please help me out. Daimonion
the r15 value is 22 ohms
Hey people, i fix zoom pedals in less than 2 minutes.
The value of the resistance is:
Gray zoom: 220 ohms +-5% tolerance
Silver zoom: 220 ohms +-5% tolerance
newer silver zoom: 100 ohms +-5% tolerance
Right now i have a little challenge, the "29m33" transistor just blow up and made a little melt-down inside the pedal.
So does anyone have the schematic??
:I have exactly the same problem with the zoom 606. I guess the value of the resistor will be more or less the same. The 29m33 transistor could also be damaged but I’ll first try just the resistor. Thanks for the help
My zoom 505 is down. I need schematics for to find the characteristics for the resistor which probably had burned. Please help me out. Daimonion
Hi can anyone out there help me? I need some instructions for the 2001 pedal as i cant make it work…help! [email protected]
Interested in buying a Zoom 508. Please email detials and price.
SI ALGUIEN TIENE UNOS BUENOS PASES PARA UN ZOOM 505 II LE AGRADESCO
how to rename a patch in zoom 707 II? please e-mail me.. thnx
how to rename a patch in zoom 707 II? please e-mail me.. thnx
i have bought a 2nd hand 9010 without manual. i figured most of he functions out except getting he control pedals to work or mother midi control devices please help me
http://www.zoom.co.jp/archive/Previous_Model/E_9010.pdf
Here are the 9000 series manuals, also 5000 and 7010
Better get yours while they’re up – thanks to the previous poster on this page who gave the address. Finally got my ValveFX / 9150 / Vortex combo to "play nice in the sandbox"
=D
http://www.zoom.co.jp/archive/Previous_Model/
GREAT !!!!!! This the best link. ThanXXXXXXXX >>>>
I am probably doing this wrong. But I am taking a shot. I have been trying to get the schematic for my Zoom 9000 effects but even the company won’t help me out. After a year and a half I am getting quite frustrated. I love my effects and I miss my effects. I need my effects. Please someone help me!!
Thanks for posting this! I’ll spread the word on the HC Effects Forum. I’m sure there are more old Zoom fans that’ll appreciate it.
Thanks from me & my 9002…
-Mark
i need patches for zoom 509
: i need notice from zoom509
i need patches for zoom 509
The damn thing didn’t come with the manual so if someone who has it could email me a copy I would be greatly appreciative. thanks
Did you get a Zoom 505 II manual? If noy I have one in PDF format
:could you e-mail me a copy of the 505 11 effects pedal please
: Did you get a Zoom 505 II manual? i need it
: Did you get a Zoom 505 II manual? If noy I have one in PDF format
I need a manual in English too. It was a xmas gift and didn’t come with English instructions.
: The damn thing didn’t come with the manual so if someone who has it could email me a copy I would be greatly appreciative. thanks
GO TO http://www.safaricomputers.com/505/reset505.asp
download the PDF and save it, easy as Em7.
Steve
you can also find it here
http://www.classicrockstars.net/index2.html
My Zoom 9000 is behaving a little strange. You can switch it on, set it, use it and all; but when you switch it off, you won’t be able re-using it for about an hour. It just doesn’t want to switch on again. Anyway, it is fully operational, it even holds your memories. Zoom assistance said it isn’t worth repairing, but I’m a son of a gun…
If you had a manual, too…
Than you everybody
: I desperatly need a zoom 9000 manuel instructions book. HELP!!!!
: : I desperatly need a zoom 9000 manuel instructions book. HELP!!!!
: : : I desperatly need a zoom 9000 manuel instructions book. HELP!!!! Thank you!
Hi there! Can hanyone tell me the adress of zoom home page/site please? Thank’s!
I need the manual for ZOOM 9020 multi effects, if someone knows were can i find it, please tell me
: I need the manual for ZOOM 9020 multi effects, if someone knows were can i find it, please tell me
If you haven’t found a manual yet. i have one and can copy it for you- let me know-
I tried to start up my 9000 last night, and it doesn’t even get powered up at all. I tried both ac adapter and batteries, to no avail. Does anybody have any ideas what’s wrong with my zoom? Thanks in advance
: I just had the same proble. It comes probably because of dont use it enought. If you tried to put brand new battery, and let it rest for a while, after that just plug a jack, and wait a while again. It while be alive again…
i want to find a website that tells you how to put some cool effects in your pedal 707ll
i need manual for zoom 3030 i fucking need it pls help me
: i need manual for zoom 3030 i **** ing need it pls help me
: i need manual for zoom 3030 i fucking need it pls help me
: : i need manual for zoom 3030 i **** ing need it pls help me
: : i need manual for zoom 3030 i **** ing need it pls help me?
: : i need manual for zoom 3030 i really need it because i never had one. pls help me
i need manual for zoom 3030 i fucking need it pls help me
please help me to get distortion patches for 2020
: please help me to get patches for zoom player 2020
: necesito que me ayuden a conseguir los manuales de la pedalera zoom 2020, se me han borrado todos los efectos y no tengo manera de poder recuperarlos , gracias
please help me to get dream theater patches for 2020
: please help me to get distortion patches for 2020 (blues,eric clapton,eric johnson,allmand brothers,bb king etc.).thanx
: : please help me to get blues patches for 2020 (blues,eric clapton,SRV,Gary Moore,bb king etc.).thanx
Can anyone tell me the milliamperage(mA) of the Zoom 9000 adapter? Also, I’m trying to find a PDF of the manual for this unit. Been to the Zoom site and the manuals only go to the 8080 model.
Hi robin,
i use a normal AC adapter with 7.5V and 300mA max. no problem with that. didn’t burn it 😉
: Can anyone tell me the milliamperage(mA) of the Zoom 9000 adapter? Also, I’m trying to find a PDF of the manual for this unit. Been to the Zoom site and the manuals only go to the 8080 model.
would any body care to email me the zoom 505 manual please?
: would any body care to email me the zoom 505 manual please?
send me an email and I can post you a manual
: : would any body care to email me the zoom 505 manual please?
:
:
hello there, i see your post about 505 manual, is that true that you have? please send me some copies.
thank you verry much,
monz
: : would any body care to email me the zoom 505 manual please?
:
: send me an email and I can post you a manual
http://www.safaricomputers.com/505/505_manual.pdf I have one too and found the manual in that adress… You need adobe acrobat cause is in PDF
: : would any body care to email me the zoom 505 manual please?
:
: send me an email and I can post you a manual
hello, i have also a zoom 505 without manual, could you please email me a copy, much obliged
andreas
please could someone email the zoom 505 manual. thanks.
i need instructions for ZOOM GFX-707 II can any one email me any
http://www.samsontech.com/products/relatedDocs/707ii.pdf
instructions in .pdf format 🙂
: http://www.zoom.co.jp
Download page
Does anyone have the manual on it?!
IF ANYONE IS INTERESTED IN SELLING THIS PEDAL AND IT IS IN GOOD OPERABLE CONDITION I WILL PAY GOOD MONEY!!!!!! E-MAIL ME!!!!!!!!!
http://www.zoom.co.jp/archive/Previous_Model/E_5000.pdf
: Does anyone have the manual on it?!
E-mail me and I’ll send you a copy.
kd
I could use a copy of the service manual for the Zoom 5000, anyone have it?