Guitar Database >> Guitars >> DanoGuitars - New & Used Danelectros & More!

Advertisement

DanoGuitars - New & Used Danelectros & More!

Note: The link to the website 'DanoGuitars - New & Used Danelectros & More!' is not shown because it is currently unavailable.

This site is a resource to purchase new, used & vintage Danelectro, Silvertone & Coral Guitars, amps, parts & accessories!

Welcome to DanoGuitars! It's not surprising that musicians who can afford the most boutique and custom instruments still buy and play Daneletro. Danoguitars.com website is a resource for those looking to purchase Danelectro guitars and amps as well as Silvertone and Coral items. There is also a limited inventory of Danelectro parts and accessories. And hey, this could be the ONLY place you'll find this stuff!!

What do you think?

Posted by Scott M on Fri, 09/16/2011 - 02:37.

I have an original 59DC (I think) that was purchased by me in 1965 or 1966. It has been unplayed since about 1970 and resides in its original cardboard faux allagator skin case. It shows very minimal wear, everything works and it sounds very vintage. I am curious as to the approximate value of the guitar these days. Any help would be appreciated.

Need Template or Plans for Cutting 59-DC Body Blank

Posted by John J Egan on Sun, 03/23/2008 - 08:02.

If anyone can help me obtain a template or the proper measurements for cutting,routing and drilling for a 59-DC body blank to receive pots, pick-ups and neck, I would be eternally grateful.

: I have managed to obtain all the necessary Korean made NOS lefty parts, including an unfinished Danelectro 59-dc body blank to build a true lefty 59-DC replica of a vintage 3021. Finally a guitar for the ages built for and by a lefty!

: Thank you for any help you may be able to offer.

Need Template orPlans for Cutting 59-DC Body Blank

Posted by John J Egan on Sun, 03/23/2008 - 07:49.

If anyone can help me obtain a template or the proper measurements for cutting,routing and drilling for a 59-DC body blank to receive pots, pick-ups and neck, I would be eternally grateful.

: Thank you for any help you may be able to offer.

Re: Need Template orPlans for Cutting 59-DC Body Blank

Posted by PATRICK ASLAKSON on Thu, 06/19/2008 - 15:44.

I too would be interested in a template for the Dano 59-DC
Please help us!!!!!!!!

: If anyone can help me obtain a template or the proper measurements for cutting,routing and drilling for a 59-DC body blank to receive pots, pick-ups and neck, I would be eternally grateful.

: : I have managed to obtain all the necessary Korean made NOS lefty parts, including an unfinished Danelectro 59-dc body blank to build a true lefty 59-DC replica of a vintage 3021. Finally a guitar for the ages built for and by a lefty!

: : Thank you for any help you may be able to offer.

Coral Hornet volume knob

Posted by L. Vergne on Sun, 08/12/2007 - 13:02.

I would like to fine a volume knob to replace a missing knob on my Coral Hornet.

Danelectro Hodad 12 String for sale on Ebay

Posted by Jason Fogelson on Thu, 01/04/2007 - 17:19.

Hey, Everyone:

I have a Danelectro Hodad 12 String listed for sale on Ebay (Item number: 130065330534):

http://cgi.ebay.com/Danelectro-Hodad-12-String-Electric-Guitar-Retro-Cool_W0QQitemZ130065330534QQihZ003QQcategoryZ33036QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

I hate to sell, but I need to make room in my collection. I would love for this Hodad to go to a Danelectro-loving home.

Take a look, and make a bid!

Best,

Jason

Dano Parts

Posted by Pat Neilon (via moderator) on Mon, 07/31/2006 - 03:07.

(Originally posted 19:43:49 5/29/06)

I have a 63 black and white danelectro stan and dan double neck guitar. I am looking for a pickguard, volume/treble knobs, and the danelectro sticker for the heads. Do you have them and what would they cost?

coral hornet

Posted by tim alley on Fri, 04/28/2006 - 15:50.

I am looking for a whole guitar or body and neck. I am trying to replace a guitar that was "stolen: from my nephew while it was being borrowed from me. I would really like a basket case or just the bodt and neck but would buy one that is whole if affordable. Any information.

knobs

Posted by Dennis Eller on Sun, 03/19/2006 - 01:42.

Trying to find some original style knobs that came on the silvertone/danelectro U1 and U2 guitars. If any one would know where I could find these please let me know. Thank you.

seeking baritone to bass conversion parts

Posted by D. St. Echo on Sun, 01/01/2006 - 15:59.

anyone out there have access to the 6-string dano bass nut & bridge?

Dano 12-string neck

Posted by R. Wentworth on Sun, 11/06/2005 - 18:11.

I have a warped neck on a Dano Elec-12. No truss rod to adj. It is a bolt on ( of course ). I have attempted physical pressure adj. Not much success. I would like to find a new neck.

Thanx!!! Bob

Re: Dano 12-string neck

Posted by Jason Fogelson on Thu, 01/04/2007 - 17:17.

: I have a warped neck on a Dano Elec-12. No truss rod to adj. It is a bolt on ( of course ). I have attempted physical pressure adj. Not much success. I would like to find a new neck.

: Thanx!!! Bob

Bob:

I have a Danelectro Hodad 12 String listed for sale on Ebay (Item number: 130065330534):

http://cgi.ebay.com/Danelectro-Hodad-12-String-Electric-Guitar-Retro-Cool_W0QQitemZ130065330534QQihZ003QQcategoryZ33036QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Take a look -- maybe a candidate for a swap?

Best,

Jason

Silvertone U1 Bass Pickguard

Posted by Richard Sharp on Sat, 09/24/2005 - 11:17.

Hello,
I've ben trying to find a pickguard for a Silvertone U1 Bass for a few weeks and no luck yet.
This bass was made by Danelectro in 1964 for Sears and I know plenty were sold.
The bass is black in color, single cut-away and one single lipstick cover pickup.
I do have a picture of the bass if someone out there can help me locate one. Thanks, Richard

Replacement Dano Pedal knobs

Posted by Bill, The Indentured Surf on Thu, 09/15/2005 - 22:58.

Howdy
Anybody know a source to obtain tha little knobs
on the danelectro pedals? (like the surf n' turf or
tuna melt)
I need three for my pedal board.
Thanx!

pickup screws

Posted by Fred Sokolow on Thu, 08/18/2005 - 19:43.

I need the screws that attach the pickups on a Danelectro 56 U2 reissue...four of 'em. Anybody got some?

re silvertone guitar

Posted by annette gonzales on Wed, 01/12/2005 - 16:19.

Not sure if you can help 'm trying to find out some info on A silvertone Model No 319.14410000 sears, roebuck &co that was given to my son 5yrs ago that was used iHave been all over the internet to find out when it was made or I can get a manual and if its even wroth fixing up for him he is just learning and its mixing a string if you cant help can you put me in the right direction
thanks

DC bass

Posted by Dennis on Fri, 01/07/2005 - 17:45.

I'm looking for a new or used neck with hardware for a Danelectro DC bass (long scale) with the intention of making a fretless DC.
Thanks

Re: DC bass

Posted by jeff hicks on Mon, 04/30/2007 - 20:33.

: I'm looking for a new or used neck with hardware for a Danelectro DC bass (long scale) with the intention of making a fretless DC.
: Thanks
i have a dc neck that has been made in to a fretless (fret space filled with a smooth woodfiller) with tuners and nut that i sell for $80 plus shipping

silvertone 1449 dual pickup

Posted by Dan Northern on Wed, 11/17/2004 - 20:04.

I purchased a silvertone 1449 dual pickup guitar over ebay. when the quitar arrived the two volume/tone knobs were missing. Have any idea where I might be able to purchase these or what I might use instead of the originals. Thanks. Dan