Belleau Engineering Custom Pickguards

196 Comments / By /

Manufacturer of custom pickguards for electric guitars. Whether you want to make your guitar stand out from the pack or just need a replacement, we can help you. Mirror, gold, silver, white and black pearls, cream/black/cream, primary colors, we have lots to choose from!

196 thoughts on “Belleau Engineering Custom Pickguards”

  1. chrome p-bass pickguard
    mark d

    looking for fender style chrome or mirror pickguard. price and turn around time please. well send existing guard as template if you requst.

  2. worthnet wave locking tuners with a whammy b
    Cheech

    how much would you say my guitar is worth
    97’Fender strat
    emg pickups
    planet wave locking tuners
    whammy tremlo
    pearl pickguard
    thank you
    cheech

  4. Mirror/Gold Scratchplate for 1973 Fender Musicmaster
    Andrew Rowe

    Hello , I am enquiring as to whether you can manufacture a good quality mirrored-gold scratchplate for a 1973 Fender Musicmaster bass guitar & the price if so…( this style had a 6-string type pick-up in it )…I’m actually after a pick up also.
    I am hoping for "as close to original" as possible.
    Your time regarding this matter is much appreciated.
    Andrew Rowe.

  5. Pickgaurd for an Epiphone SG Special - 2 humbuckers
    Brendan Hughes

    I need a replacement pickgaurd for my Sg special on my Epiphone. I need it quick so if anyone has one please e – mail me.

    1. Re: Pickgaurd for an Epiphone SG Special - 2 humbuckers
      jon baumgarten

      i also need a pick guard for my epiphone SG special plz e mail me if u have one or no where i can get one thanks

    2. Re: Need a trace around a pickguard for an Epiphone SG Special 2-hum Trans
      justin pilcher

      : I need a link to where i can get a trace around a pickguard for an Epi SG Special 2-Hum Trans

  11. pickup 4 fender
    Zb

    i own a ’00 fender standard jazz bass(made in mexico). i was looking 4 a pickguard made of the same metal finish( i’m assuming stainless ) as the plate under the control knobs. i see many brushed aluminum and mirror finishes, but never a stainless. any comments would greatly be appreciated. thankyou.
    [email protected]

  12. pickup 4 fender
    Zb

    i own a ’00 fender standard jazz bass(made in mexico). i was looking 4 a pickguard made of the same metal finish( i’m assuming stainless ) as the plate under the control knobs. i see many brushed aluminum and mirror finishes, but never a stainless. any comments would greatly be appreciated. thankyou.
    [email protected]

    1. Re: sg pickguards
      Jason Simonidis

      I hope that you might give me some help!!!! I own an "epiphone" SG G-400 model and I want to change my pickguard with the one that "gibson" standard SG models have( which as you know is bigger…) Is that possible because as I can see in pictures, the holes are in different possitions comparing G-400 and Sg standard model… Thanks for your time!!!

  14. Belleau Engineering no longer in business
    Peter Belleau

    Unfortunately we have gone out of business. I have notified 2000 Guitars and requested that they pull our listing. I suggest trying WD Music for your pickguard needs.

    Many thanks,

    Peter Belleau
    Belleau Engineering

  16. FENDER JAZZ BASS PICKGAURD
    mikey

    DOES ANYBODY KNOW WHERE I COULD FIND FENDER JAZZ BASS PICKGAURD,NOTHING SPECIAL JUST LIKE,A BLACK OR A PEARLOID ONE,THANX

  17. is there any way i can get this certian made pickguard for my guitar?
    Doug Malone

    hi im buying a white stratocaster.it has a humbucker at the bridge and 2 single coils. Its like a texas special strat, its setup with the pickups, and i was wondering if i could get the pick guard in a daphne blue color((its like a light blue)).but i want it with just a volume knob on it and nothing else like tom delonges startocaster from fender.I want no tone knobs or a pickup switch knob.If there is anyway i can get this plz let me know!
    thanx so much!
    ~DoUg~

    1. Re: is there any way i can get this certian made pickguard for my guitar?
      stu

      hey dude, my self i would wana keep the pickups and the tone, im a big blink 182 fan but toms style is good for that setup if u wana get the best of guitar u shud keep the other pickups especially on a strat, i dnt know if ur into the chilis or if ya play ne hendrix they or have (hendrix)changed the pickup to the neck 1 and messed around with the tone to play some songs. but if u think its wat u want then u could ask at ur local shop or find a shop that fixes guitars or a workshop that deals in fxing parts and that if they can make u 1.

    2. can I get this pickguard in this type material from a tracing
      jim

      Hi,I’m needing a 5 layer guard that is 7/64 th inch thick or .115 thick and the layers top to bottom need to be"blk .020 wht .020 blk .020 wht .040 blk .015" this is how the original material measured?I also want to know if this material is available in CELLULIOD?

    1. Re: ibanez pickguard
      Corey

      I really need a pick guard for my Ibanez RG 120 it like broak at the aned of it so it doesnt pick up all the frequencies the color dosent really matter its a white guitar and i have a white pearl (broaken) pickguard on it now if u could some how mabey help me out email me a.s.a.p.

    1. Re: Gibson SG Pickguard
      Sween

      : Pickguard for Gib SG ………. Where can i find custom pickguards for a 2000 Gibson SG Standard
      Looking for one for a 71′ SG Standard, any clue where I can find one or get one custom made?

  21. i need a pickguard
    Jeremy Bailey

    I have a bass guitar that is a Hagstrom. It’s probably 15 years old, and they stopped making them a while back. email me and tell me what i need to do to get a new pickguard.

    -thanx

    1. Re: ibanez tr bass pickguard
      Nick Espinosa

      I have an Ibanez TR-50, and although I dont think I would want to give up its pickgaurd, I might be able to make a copy or tracing of it for you to take to someone, or make a copy of yourself.
      Nick

      : anyone got any idea where i can get a pickguard for my ibanez tr?
      : [email protected]

      1. Re: ibanez tr bass pickguard
        Pickles

        : I have an Ibanez TR-50, and although I dont think I would want to give up its pickgaurd, I might be able to make a copy or tracing of it for you to take to someone, or make a copy of yourself.
        : Nick

        :
        : : anyone got any idea where i can get a pickguard for my ibanez tr?
        : : [email protected]

        Are u looking to sell ur TR50?, i want one bad, ill buy it, name ur price

  23. guitar OR pickguard
    J Balog

    trying to locate a pickgaurd with ROSES on it or a guitar with the roses already on it.anyone having anything like this or know where to locate one please email me at [email protected]/ That sunshinemill1 is the #1 not 3 l’s (looks a little confusing I know)
    Thanks
    j balog

  26. SCHECTERPICKGUARD
    david flynn

    1982 SCHECTER STRAT BODY STLYE: NECK AND BRIDGE DUAL COIL PICKUP, CENTER SINGLE COIL;5- POSITION SELECTOR SWITCH ;(1)LOWER VOLUME POD AND ONE TONE CONTROL POD.NEED CHROME OR MIRROR PICKUP GUARD. THANK YOU.

    1. Re: SCHECTERPICKGUARD
      romain bidaut

      I am looking for a 78-82 schecter strat , if you know of one,. please let me know at [email protected]

      :

      1982 SCHECTER STRAT BODY STLYE: NECK AND BRIDGE DUAL COIL PICKUP, CENTER SINGLE COIL;5- POSITION SELECTOR SWITCH ;(1)LOWER VOLUME POD AND ONE TONE CONTROL POD.NEED CHROME OR MIRROR PICKUP GUARD. THANK YOU.

  27. replacement pickguard
    doug cappelli

    is it possible to find a replacement or custom pickguard for a schecter model-t bass? i have searched the net and found nothing. any suggestions would help.
    thanks

  36. Pickgaurd
    mike

    Yes I’m looking for a pickgaurd for my yamaha Rgz621p. the one that is on it is a 2humbucker 1singal pickgaurd. I would like to have a 2singal 1humbucker pickgaurd,(b/w/b). can you make me one, or find one. Thanks mike

    1. Re: surfcaster pickguard
      Blaine

      Hi, you can get Chandler Guitars to make you a custom pickguard. They orignally made components for the surfcaster. Look them up on line and then call them. They’re very helpful. Good luck. On a side note, would you consider selling your surfy? Blaine.

    2. Re: surfcaster pickguard
      AL

      Hi, I’ve got an original charvel surfcaster with the two lipstick pickups, and I really want to swap out the bridge one for a humbucker, maybe we could do some measuring and see if a mutual swap would work out? I might even swap the original lipstick pickup for the humbucker you’re using if it’s a nice one?

    3. Re: This popular thread has been given its own page :... mike medina
      mike medina

      i recently acquired an early 90’s charvel surfcaster that has been fitted with a humbucker in the bridge position. i would like to replace this pickup with a lipstick tube pick up, but i realize that this will leave a hole if i use an original style pickguard. The NEW jackson surfcasters, however, use a pickguard that comes down to a 90-degree angle on the lower left corner. this is done to facilitate the standard humbucker on these models. what i want is a pickguard that is cut in the new style, but routed for two lipstick tubes. can anyone help me with this? please e-mail me. thank you.

  38. aluminum pickguard
    Matt

    I have a black Fernandes with all the styling of a Fender strat. I am having trouble finding a shiny aluminum pickguard to go with the black body and hope that you could help.

  39. Metal custon pickguard
    Chris Lovegrove

    Hey there. I was jus wonderin if any1 knos of a custom shop that could make me a pickguard for either an SG or a Standard Tele out of Diamond metal, the stuff thats used on emergency stairs and James Hetfields ESP Explorer. Any web addresses, addresses or phone numbers of british companies would be great, but internatioanl companies are acceptable. Cheers!!!

  43. pickgaurd needed for a 93 telecaster with humbucker in neck
    michael d

    i would like a pickguard made for my 93 telecaster it has a humbucker in the neck position i nwould like it to be mother of pearl in color how much will it cost me let me now please…..

    1. Re: pickgaurd needed for a 93 telecaster with humbucker in neck
      michael d

      : i would like a pickguard made for my 93 telecaster it has a humbucker in the neck position i nwould like it to be mother of pearl in color how much will it cost me let me now please…..

      1. Re: pickgaurd needed for a 93 telecaster with humbucker in neck
        michael d

        : : i would like a pickguard made for my 93 telecaster it has a humbucker in the neck position i would like it to be mother of pearl in color how much will it cost me let me know please…..

  44. Where can I find a Flying-V Pickguard?
    Screecher

    Does anyone know where I can order a black Flying V pickguard? please answer with a URL and price Quote. QUICK!

    1. Re: Where can I find a Flying-V Pickguard?
      Octavian

      : Does anyone know where I can order a black Flying V pickguard? please answer with a URL and price Quote. QUICK!

      I’m having the same problem only I need a white one.I bought one from e-bay the guy had a picture of a flying v medallion and the add read classic, rare,tough to find pickguard blah blah It’s to small.
      Beware of e-bay.

  45. pickguard for Epiphone
    brandon winters

    i need a pickguard for my Epiphone special model II. it has two humbuckers and chrome hardware. can you help me out with finding a good one?

  46. travis bean pick guard
    Mike Implicito

    Are you familiar with the stainless steel pickguard found on 70’s era Travis Bean guitars. I recently purchased a TB1000S that is missing the guard and I need help.

    1. Re: travis bean pick guard
      Steve Maguire

      : Are you familiar with the stainless steel pickguard found on 70’s era Travis Bean guitars. I recently purchased a TB1000S that is missing the guard and I need help.
      I too am missing a pickguard, I have posted for someone to trace,scan or give dimensions as I have access to laser cutting to get some pattern parts made. I am awaiting any replies on the dimensions

  47. Jazz Bass pickguard in tortoise
    jon singletary

    I am looking for a Fender Jazz bass pickguard in traditional tortoise finish for a 2000 Standard Jazz Bass. I do not want the holes for thumbrest and bridge/pickup covers. I have read that the holes are placed differently on different models, however my ’71 and 2000 appear to be the same. Please respond with price, estimated delivery time.

    1. Re: Jazz Bass pickguard in tortoise
      Bruno Ducca

      : I am looking for a Fender Jazz bass pickguard in traditional tortoise finish for a 2000 Standard Jazz Bass. I do not want the holes for thumbrest and bridge/pickup covers. I have read that the holes are placed differently on different models, however my ’62 and 2000 appear to be the same. Please respond with price, estimated delivery time.

  48. Telecaster Custom pickguard
    Rob Gargus

    I would like to know if you could make a pickguard for a early 70’s Fender telecaster custom. It has a humbucker in the neck position.
    2 tone and 2 volume knobs, and a 3 way toggle in the LP position. I want the pickguard made in tortoise shell and I want the bridge
    pickup hole made to accomadate a gibson ’57 humbucker. Please email me with a price quote and availability.

    thanks,

    ROB

  50. pickgaurds
    Philip Strickland

    I have a 1999 Gibson SG special and I wanted to know how much it would be to make another pickgaurd for it. I would like a white one with a black outline. Please email me back witha price. Thanks.

    Philip

    2. Re: pickgaurds
      Garett

      : I have a brand new Epiphone G-310 SG style guitar and I cant find any place that sells pickgaurds for it being that it is a different style pickgaurd than other Epiphone SG style guitars. I wanted to know how much it would be to make another pickgaurd for it. I would like a cream one with a cream outline. Please email me back witha price. Thanks.

      :Garett

Leave a Reply