Looking for a tremolo bridge for a Yamaha YG 512. The pieces where the fine tuning is located are broken, i think they are called saddles. Can anyone help please let me know thanks
Hello! I need a replacement guitar jack (complete assembly) for an Ibanez AEF37-TCS-OP-01 acoustic/electric. The jack assembly provides for a 1/4″ and a 2nd large jack. I want to replace the entire assembly from the plug-in to the control head.
If I need to buy the entire trashed guitar, I will! Thanks!!
I require a replacement body for an Ibanez Roadstar Series II RG410. They seem scarce on the internet. Warmoth doesn’t produce bodies that will fit the neck specifications. Any suggestions?
i have a very nice yamaha FG250 12 string (could be 2500… not sure) but i have a big problem… the guitar wont hold its tune more than 3 days.. ive found that my machine heads are in bad condition and need replaced. if anyone at all can help me with the name of a site where i can buy these parts, please help! ive looked everywhere in my area but have had no luck. if anyone can help, id really appreciate it, i love playing that guitar lol
the neck your looking for is made by bunker guitar company the inventer of the tension free neck and a replacement neck will cost you 168 dollars on there main webpage 🙂
I LOVE ROADSTARS AND I AM LOOKING FOR THE FOLLOWING TO FINISH A FEW PROJECTS. THE 1ST IS I NEED VINAGE IBANEZ CASES BROWN OR GRAY WILL BE FINE. 2ND I NEED A NECK FOR MY ROADSTAR RG440. THIS NECK IS 22 FRETS, SKUNK STRIPE DOWN THE BACK WITH FLOYD ROSE LOCKING NUT. HERE IS THE THING, IT HAS THE THE NOW COMMON IBANEZ CHECK MARK LOGO WITH THE RG HEADSTOCK WHICH REPLACED THE OLD BLAZER LOOK ALIKE HEADSTOCK.
THE LAST IS I NEED TREM ARMS FOR PRO ROCK’R BRIDGES ALONG WITH LOCKING NUT PARTS. WHY IBANEZ DOES’NT SELL PARTS FOR THESE AMAZING GUITARS I HAVE NO CLUE. THANKS
i currently have some pro rocke’r parts in black for sale on ebay. item listing number is: 290079838055 . feel free to make me an offer on these parts if interested. I would be willing to bypass ebay as long as paypal is used as payment.
Were you able to find the arm? If so please let me know, I’m looking for one too! OR at least the compatible arm specs (size, thread, etc.) so I can install an equivalent arm to enable use of the trem. Thanks!
: Looking to buy or trade for a Gretsch Broadkaster(Solid-body) Model 7600 or 7601 Contact: Mike at [email protected]
I have one in very good condition.
We usually have the odd wee Ibanez part in our workshop. We don’t have any in at the moment but if you still want one I might be able to order one in for you.
Where can I find them? Does anyone know if they make an ebony fretboard version? Who can do a custom one? The measurements of the pocket are 2 1/4" wide by 11/16" deep. Anyone?
From the research that I have done, I have a prorocker bridge (although there are no markings). While changing out the strings, the intonation nut (that holds the saddle in place) snapped in half. Does anyone know where to find this small part?
hey there, anyone know of anywhere i can get 5 of the detuning switch found on the ibanez ax 125. im planning on customising my guitar!! cheers, adrian
I need a part for my pro rock’r tremelo. These were on the pro line series and some roadstars around 1985. If you have one or some parts please let me know.
I need an Ibanez Pro Rock'r II bridge, or parts!!!
CAM
I have an Ibanez PR-1660 guitar with a Pro Rock’r II tremolo on it. The bridge pieces are wearing down badly, and I need replacements. Can anyone help a brutha’ out?
: Looking for parts or a complete Ibanez Pro Rock-r Trem. these were used in the Roadstar 2 guitars.
I am just lookin a tremolo Arm for my Jem 7 vwh i think is an Edge pro
I need to find a couple of the floating bridges that to replace a couple on my old stellas.They seem to give out in about the same spot on all of em.If anyone has a clue to where I might start to find one,please let me know
Russ
Re: This popular thread has been given its own page :... Jacqueline
Jacqueline
: I need to find a couple of the floating bridges that to replace a couple on my old stellas.They seem to give out in about the same spot on all of em.If anyone has a clue to where I might start to find one,please let me know
: Russ
Sunday Oct 2 2005
Russ,
I was just going to take an older Stella to the antique lady. I don’t know where to look for a date on the guitar. But we have had it since the 1970’s. Would you be interested?
Jacqueline
How much are you asking?: I have an entire Ibanez PF230 guitar for sale. Seldom used. Shame to see it sit forever unused since I can’t play very well. 1978 Les Paul copy.
: : I need a neck for an Ibanez ex series 22 fret. serious offers only! money is no object!
I have a whole bass guitar that I just picked up from one of my friends. It looks to be in good shape. email me if you are interested. I can send pictures.
I know these posts are old, but I am looking for parts for the Pro Rock’r tremolo for an ’85 RS440 Roadstar II. Please contact me if you have parts for this tremolo at [email protected].
i need the nut that holds the string holder on u know the nut that has 2 screws goin through it in the shape of a T it ajusts the string tension to i thank its called the main tuner. and i need a whammy bar for a 1984 IBanez RS430. serial # 1840256 if helpful. ill give u 30 bucks for those two thangs. 🙂
Didn’t mean to repost your post, but I have the same exact problem. Just acquired a 1985 Roadstar II, which predates the Ibanez "Edge" tremolo system by a year. The 1985 online catalog calls the missing component their "TOP LOK" nut-locking plate, probably the name for their tremolo system at that time. Would you know where to find that T-shaped "plate", along with the matching whammy bar? Thanks!
I currently have 17 saddle barrel adjusters for the Pro Rock’r on sale on Ebay. These are new aftermarket replacements machined from solid brass stock. Search for item number 7342965781 on Ebay. Thanks for looking!
I was curious if you had just the locking nut from the pro rock’r system. It was the only piece I was looking to replace. I’ll offer 25 for now. Shoot me a message back if you have one.
I am trying to find a replacement neck for an Ibanez Talman. Either one off of a talman or one of another make that would fit with little to no alterations. Any hlep would be greatly appreciated. Thanks alot.
-Mark Miller
Looking for a tremolo bridge for a Yamaha YG 512. The pieces where the fine tuning is located are broken, i think they are called saddles. Can anyone help please let me know thanks
Hello! I need a replacement guitar jack (complete assembly) for an Ibanez AEF37-TCS-OP-01 acoustic/electric. The jack assembly provides for a 1/4″ and a 2nd large jack. I want to replace the entire assembly from the plug-in to the control head.
If I need to buy the entire trashed guitar, I will! Thanks!!
NEEDH part num of 1NKPSR5BK neck. MACHINE HEAD SET AND 2MHICN232C. NEED THESE PARTS HAVE AND BASS SR305DX MAY?
I require a replacement body for an Ibanez Roadstar Series II RG410. They seem scarce on the internet. Warmoth doesn’t produce bodies that will fit the neck specifications. Any suggestions?
i have a very nice yamaha FG250 12 string (could be 2500… not sure) but i have a big problem… the guitar wont hold its tune more than 3 days.. ive found that my machine heads are in bad condition and need replaced. if anyone at all can help me with the name of a site where i can buy these parts, please help! ive looked everywhere in my area but have had no luck. if anyone can help, id really appreciate it, i love playing that guitar lol
wanted a back electronics cover,for Fernandes Vertigo x
I’m looking to replace the neck,do you know where to get one?
[email protected]
Looking for volume and tone knobs off of a Roadstar 1985
Cheers!
Eddie
One (1) Trem, and knobs for volume and tone pots. 1983 stock only. Thx.
: One (1) Trem, and knobs for volume and tone pots. 1983 stock only. Thx. I have what you need. contact me 260-312-1789
Only need one but will purchase entire set. This is for a 1974 acoustic. FG200
Thanks
Mark
: Only need one but will purchase entire set. This is for a 1974 acoustic. FG200
: Thanks
:Mike
hi can anyone help with infor. on new pickguards for this model or the j-50 cheers kj
Yeah I need a gold Pro Rocker tremolo for my AR350.
I need a Pro Rock’r top lok for a Roadstar RS 530 in black finish.
I need a zr tremolo with all of its parts for a 2003 s470dxqm. I need one a.s.a.p will pay up to $200.00
i need a bass neck, atk 300 ibanez, 94/95 model, any help at all will be greatly appreciated. looking to buy.
the neck your looking for is made by bunker guitar company the inventer of the tension free neck and a replacement neck will cost you 168 dollars on there main webpage 🙂
Howdy fellow musicians.I’m desperatly lookin’for a custom shop (logo) stratocaster neck plate.Can anyone help me?
I LOVE ROADSTARS AND I AM LOOKING FOR THE FOLLOWING TO FINISH A FEW PROJECTS. THE 1ST IS I NEED VINAGE IBANEZ CASES BROWN OR GRAY WILL BE FINE. 2ND I NEED A NECK FOR MY ROADSTAR RG440. THIS NECK IS 22 FRETS, SKUNK STRIPE DOWN THE BACK WITH FLOYD ROSE LOCKING NUT. HERE IS THE THING, IT HAS THE THE NOW COMMON IBANEZ CHECK MARK LOGO WITH THE RG HEADSTOCK WHICH REPLACED THE OLD BLAZER LOOK ALIKE HEADSTOCK.
THE LAST IS I NEED TREM ARMS FOR PRO ROCK’R BRIDGES ALONG WITH LOCKING NUT PARTS. WHY IBANEZ DOES’NT SELL PARTS FOR THESE AMAZING GUITARS I HAVE NO CLUE. THANKS
I have the full assembly up on ebay right now. It’s Item number: 250081950151
: I have the full assembly up on ebay right now. It’s Item number: 250081950151
I have searched your item number/ has this been sold or time ran out. would like to purchase.
i currently have some pro rocke’r parts in black for sale on ebay. item listing number is: 290079838055 . feel free to make me an offer on these parts if interested. I would be willing to bypass ebay as long as paypal is used as payment.
Does anyone know where I can get a tremelo arm for a yamaha sc300t. I am also looking for other parts as well, but mostly the arm.
Aloha!
Were you able to find the arm? If so please let me know, I’m looking for one too! OR at least the compatible arm specs (size, thread, etc.) so I can install an equivalent arm to enable use of the trem. Thanks!
Mahalo! -Lan
I need a saddle for my Yamaha FG150.
Looking for Fender (Mfg. by Parker) "Body Guard" for Jazzmaster and Stratocaster, either original (circa 1964-70) or reproduction if any exist.
Looking to buy or trade for a Gretsch Broadkaster(Solid-body) Model 7600 or 7601 Contact: Mike at [email protected]
: Looking to buy or trade for a Gretsch Broadkaster(Solid-body) Model 7600 or 7601 Contact: Mike at [email protected]
I have one in very good condition.
i need tremolo bar for a ibanez roadstar
Hello Tim,
We usually have the odd wee Ibanez part in our workshop. We don’t have any in at the moment but if you still want one I might be able to order one in for you.
Send me an email to let me know.
Hope to hear from you soon.
Vari @ Strung Out Guitars
: i need tremolo bar for a ibanez roadstar
I need a saddle for a pro rock’r tremolo. will buy parts , whole or partial bridge. please help me restore my 1985 x-series ibanez thanks, matt
i have some full saddles with all parts up for ebay auction right now. item number is 290079838055.
I have one up on ebay now. It’s Item number: 250081950151
I need the tremelo arm socket part number 2zr2-9, and I can’t find it anywhere help anyone?
I’m looking for a set of vol/tone knobs for an old late 70’s Artist.
They’re the ones with the rubber ring insert.
Can anyone help?
Thanks
I am looking for a pickguard, Yamaha calls it a panel, for an sc300t electric gutar. Thanks
: I am looking for a pickguard, Yamaha calls it a panel, for an sc300t electric gutar. Thanks
i can make you one
: I am looking for a pickguard, Yamaha calls it a panel, for an sc300t electric gutar. Thanks
do you need the back panel and pickups/pots also?
: : I am looking for a pickguard, Yamaha calls it a panel, for an sc300t electric gutar. Thanks
: do you need the back panel and pickups/pots also?
No, Just the pick guard. Steve
: : : I am looking for a pickguard, Yamaha calls it a panel, for an sc300t electric gutar. Thanks
: : do you need the back panel and pickups/pots also?
: I have a pick guard for this guitar! white single ply. i will sell it to you
: No, Just the pick guard. Steve
i need a locking nut assy for pro rocker trem system, or the screws and hold downs. email me
at [email protected]
Need a bridge saddle, but would also be willing to purchase the entire bridge assembly.
Thanks!!
Where can I find them? Does anyone know if they make an ebony fretboard version? Who can do a custom one? The measurements of the pocket are 2 1/4" wide by 11/16" deep. Anyone?
From the research that I have done, I have a prorocker bridge (although there are no markings). While changing out the strings, the intonation nut (that holds the saddle in place) snapped in half. Does anyone know where to find this small part?
Thanks, Rick
Looking for a complete ProRock’R trem in good condition (no corrosion)
If you have one and willing to part with it, drop me an email.
Cheers
Flip
Belgium
Need the battery holder that runs the pickup. It slips into the body from the outside. the model is AEF37-TCS-OP-01. Thanks for your help.
: Need the battery holder that runs the pickup. It slips into the body from the outside. the model is AEF37-TCS-OP-01. Thanks for your help.
You asked how much did guitar cost. well, I bought mine new in 2002 and the price tag is still on guitar and it says $800.00
: Need the battery holder that runs the pickup. It slips into the body from the outside. the model is AEF37-TCS-OP-01. Thanks for your help.
REPLY: HOW MUCH DID YOU PAY FOR THE GUITAR? THANKS
what type of neck will fit a steve vai jem replacement body
hey there, anyone know of anywhere i can get 5 of the detuning switch found on the ibanez ax 125. im planning on customising my guitar!! cheers, adrian
I need a part for my pro rock’r tremelo. These were on the pro line series and some roadstars around 1985. If you have one or some parts please let me know.
parts for ibanez pro rock’r tremolo on ebay now 10/05/05 http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=7321737658&rd=1&sspagename=STRK%3AMESE%3AIT&rd=1
i have a full pro rock r for sail on ebay uk
Please help….
http://www.ibanezrules.com/parts.htm#Trems
Help I’m looking for a 1985 artist truss rod cover the one with ARTIST written on it. thanks
I have an Ibanez PR-1660 guitar with a Pro Rock’r II tremolo on it. The bridge pieces are wearing down badly, and I need replacements. Can anyone help a brutha’ out?
Looking for parts or a complete Ibanez Pro Rock-r Trem. these were used in the Roadstar 2 guitars.
i have a full pro rock r for sail on ebay uk
: Looking for parts or a complete Ibanez Pro Rock-r Trem. these were used in the Roadstar 2 guitars.
I am just lookin a tremolo Arm for my Jem 7 vwh i think is an Edge pro
Hi
I am looking for a tailpiece for a circa 1930 Roger Acoustic Guitar. My e-mail address is [email protected].
Thanks
Does anyone know where I can find locking saddle parts for my
Ibanez Lukather?? any help would be appreciated
I need to find a couple of the floating bridges that to replace a couple on my old stellas.They seem to give out in about the same spot on all of em.If anyone has a clue to where I might start to find one,please let me know
Russ
This popular thread has been given its own page : Re: Stella guitar-Bridge needed
i might be send a picture and or description
: I need to find a couple of the floating bridges that to replace a couple on my old stellas.They seem to give out in about the same spot on all of em.If anyone has a clue to where I might start to find one,please let me know
: Russ
Sunday Oct 2 2005
Russ,
I was just going to take an older Stella to the antique lady. I don’t know where to look for a date on the guitar. But we have had it since the 1970’s. Would you be interested?
Jacqueline
need to find electronic for this baby.model no 5AEQ17
I have a yamaha campass series guitar. the clip that holds the battery in has broken and i was wondering were i could order another battery pack.
I have an entire Ibanez PF230 guitar for sale. Seldom used. Shame to see it sit forever unused since I can’t play very well. 1978 Les Paul copy.
How much are you asking?: I have an entire Ibanez PF230 guitar for sale. Seldom used. Shame to see it sit forever unused since I can’t play very well. 1978 Les Paul copy.
: I have an entire Ibanez PF230 guitar for sale. Seldom used. Shame to see it sit forever unused since I can’t play very well. 1978 Les Paul copy.
Is it still for sale?
I need a neck for an Ibanez ex series 22 fret. serious offers only! money is no object!
: I need a neck for an Ibanez ex series 22 fret. serious offers only! money is no object!
: : I need a neck for an Ibanez ex series 22 fret. serious offers only! money is no object!
I have a whole bass guitar that I just picked up from one of my friends. It looks to be in good shape. email me if you are interested. I can send pictures.
: I need a neck for an Ibanez ex series 22 fret. serious offers only! money is no object!
i have one that’s been repaired
This popular thread has been given its own page : Ibanez pro rock ‘r trem parts for sell!
I need somes fine tuners screws. E-mail me you have it.
[email protected]
i need the 6 screws and blocks that lock the strings in the bridge….can anyone help me? my email is [email protected]
Hi
I need the 6 screws of the rock r trem that lock the strings.
: make me an offer!
: http://b4p.net/prorockr/
i need two of the fine tuners off of the tremelo i will take all six if you have them
: make me an offer!
: http://b4p.net/prorockr/
: i need two of the fine tuners off of the tremelo i will take all six if you have them
: : make me an offer!
: : http://b4p.net/prorockr/
Ill pay 15 bucks a piece if thats fair?
I know these posts are old, but I am looking for parts for the Pro Rock’r tremolo for an ’85 RS440 Roadstar II. Please contact me if you have parts for this tremolo at [email protected].
Thanks.
i need the nut that holds the string holder on u know the nut that has 2 screws goin through it in the shape of a T it ajusts the string tension to i thank its called the main tuner. and i need a whammy bar for a 1984 IBanez RS430. serial # 1840256 if helpful. ill give u 30 bucks for those two thangs. 🙂
Didn’t mean to repost your post, but I have the same exact problem. Just acquired a 1985 Roadstar II, which predates the Ibanez "Edge" tremolo system by a year. The 1985 online catalog calls the missing component their "TOP LOK" nut-locking plate, probably the name for their tremolo system at that time. Would you know where to find that T-shaped "plate", along with the matching whammy bar? Thanks!
i need a new neck for an ibanez trem2
i need a new neck for an ibanez trem2
i need a new neck for an ibanez trem2
I need a saddle assembly for a pro rock’r bridge or would buy a whole or partial bridge. can you help me?
: make me an offer!
i need a locking nut assy for pro rocker on destroyer 2
or just the screws and hold downs
: http://b4p.net/prorockr/
: make me an offer!
: http://b4p.net/prorockr/
i WILL buy these parts from you. email me.
I currently have 17 saddle barrel adjusters for the Pro Rock’r on sale on Ebay. These are new aftermarket replacements machined from solid brass stock. Search for item number 7342965781 on Ebay. Thanks for looking!
B
I have a broken Pro Rock’R. The small square block are snapped. Can you help?
Link does not work!
Please email me me at [email protected] if you still have parts.
Thnks!
make me an offer!
http://b4p.net/prorockr/
I was curious if you had just the locking nut from the pro rock’r system. It was the only piece I was looking to replace. I’ll offer 25 for now. Shoot me a message back if you have one.
I live in Russia but I’m need very much one saddle for pro rock’r tremolo. Please, answer me on [email protected]
I am trying to find a replacement neck for an Ibanez Talman. Either one off of a talman or one of another make that would fit with little to no alterations. Any hlep would be greatly appreciated. Thanks alot.
-Mark Miller