656 thoughts on “Analog Music Zone”

    1. Re: Colorsound Wah Wah
      ashley carr

      could you please email me the price (and picture) of the 60s/70s colorsound wah wah pedal and any other pedals, maybe fuzz pedals, i am interested in buying one of your products.

      many thanks ashley carr

    1. Re: i need a schematic - metal zone mt-2
      colin

      i have built one. I havent compared to an original side-by side yet, but it sure sounds alike.
      email me and ill send the schematics to you

  1. sch. for marshall p801 footswith
    Ed

    Hey . I am looking for a schematic for the marshall p801 double foot switch , it switches from clean to dirty channel and it switches effects off and on . in a marshall MG series amp, I want to build a remote switching device from a car remote that I have

      1. Re: Cry Baby 535Q i need schematic, but better in pcb
        tom

        : : I’m looking for schematics the "cry baby 535Q".

        : any who have it please sendme by email
        : n d pcb if you have it

        : [email protected]

        hi!

        did you manage to get the schematics and layout?

        if you did , i would love to get them from you

        THANKS

  2. i need MT2 PCB &schematic
    myrahazlitt

    i need MT2 pcb and schematic ,please send it to my email
    Thanks a lllllllllllllllllllllot!!!!!!!!!!!!!!!!!!!!!!!

    1. Re: vs-100V model 8100 Marshall Amplification
      Tai Truong

      : I need a valvestate 100V model 8100 Marshall Amplification Diagram and Service manual please, it´s URGENT, many thanhs.

  3. Boss OD - 2 R Turbo OverDrive
    Budi

    Boss OD-2R Turbo OverDrive
    : : help! im in desperate need of a schematic for a Boss OD-2R Turbo OverDrive. can anyone help me!

    1. Re: i nedd schematic for performer FENDER
      Mikkel

      Hi’
      I’ve got a schematic for fender performer 650 in english.
      sent me your mail adress and ill ´send it to you if needed

      best regards
      Mikkel

      : hello , i try to find a schematic for fender performer 650 , for repar
      : have you information ??
      : best regards

      : rudy

      1. Re: i nedd schematic for performer FENDER
        Jay

        : Hi’
        : I’ve got a schematic for fender performer 650 in english.
        : sent me your mail adress and ill ´send it to you if needed

        : best regards
        : Mikkel

        : : hello , i try to find a schematic for fender performer 650 , for repar
        : : have you information ??
        : :

        Hi. I hope you can still read this.. could you send me the schematic for the fender performer 650.
        [email protected]
        many thanks!
        Jay

        1. Re: i nedd schematic for performer FENDER
          Schematic for a Fender Performer

          : : Hi’
          : : I’ve got a schematic for fender performer 650 in english.
          : : sent me your mail adress and ill ´send it to you if needed

          : : best regards
          : : Mikkel

          Hi Mikkel,
          can you email a copy to me at: alton AT altonrex DOT com? Thanks! `alton

      2. Re: i nedd schematic for performer FENDER
        Eric Darby

        I was online searching for a schem for this particular amp (performer 650) and noticed your post. If you still happen to have the schematic and would be willing to send it to me, it would be much appreciated. Thanks.
        Eric

        : Hi’
        : I’ve got a schematic for fender performer 650 in english.
        : sent me your mail adress and ill ´send it to you if needed

        : best regards
        : Mikkel

        : : hello , i try to find a schematic for fender performer 650 , for repar
        : : have you information ??
        : : best regards

        : : rudy

        1. Re: i nedd schematic for performer FENDER
          fredy

          : I was online searching for a schem for this particular amp (performer 650) and noticed your post. If you still happen to have the schematic and would be willing to send it to me, it would be much appreciated. Thanks.
          : Eric

          :
          : : Hi’
          : : I’ve got a schematic for fender performer 650 in english.
          : : sent me your mail adress and ill ´send it to you if needed

          : : best regards
          : : Mikkel

          : : : hello , i try to find a schematic for fender performer 650 , for repar
          : : : have you information ??
          : : : best regards

          : : : rudy

          1. Re: i nedd schematic for performer FENDER
            udical

            : : I was online searching for a schem for this particular amp (performer 650) and noticed your post. If you still happen to have the schematic and would be willing to send it to me, it would be much appreciated. Thanks.
            : : Eric

            :
            : :
            : : : Hi’
            : : : I’ve got a schematic for fender performer 650 in english.
            : : : sent me your mail adress and ill ´send it to you if needed

            : : : best regards
            : : : Mikkel

            : : : : hello , i try to find a schematic for fender performer 650 , for repar
            : : : : have you information ??
            : : : : best regards

            : : : : rudy

            Hi.
            If anyone can, please send me the schematics for the performer 650 to this mail:
            [email protected]
            Thank’s ! 🙂

  4. Wiring diagram for Gibson EB3 bass - help!
    Chris Cope

    Hi. Does anyone have a wiring diagram for a Gibson EB3 bass? Please e-mail it to me if you do. I need to fix my bass soon. Thanks!- C in Tulsa, OK

    1. Re: Wiring diagram for Gibson EB3 bass - help!
      Ray Keesh

      : Hi. Does anyone have a wiring diagram for a Gibson EB3 bass? Please e-mail it to me if you do. I need to fix my bass soon. Thanks!- C in Tulsa, OK

      1. Re: Wiring diagram for Gibson EB3 bass - help!
        Dan

        : : Hi. Does anyone have a wiring diagram for a Gibson EB3 bass? Please e-mail it to me if you do. I need to fix my bass soon. Thanks!- C in Tulsa, OK

        have you found a diagram yet? I have one. Free!

        [email protected]

    1. Re: I HAVE MT2 schematics
      Gerry

      Please could you send me the Boss MT-2 schematics, i’m trying to repair my guitar effects without spending too much money. Thank You

      : I´m from Argentina. I HAVE MT2 schematics and in a few weeks I will finish the PCB design and the prototype circuit.
      : Please be patient and contact to me for send the OrCad files to you.

    2. Re: This popular thread has been given its own page :... Andres
      Andres

      I´m from Argentina. I HAVE MT2 schematics and in a few weeks I will finish the PCB design and the prototype circuit.
      Please be patient and contact to me for send the OrCad files to you.

      1. Re: Citronic PPX900 schematic required
        Greg

        : : If you still need schematic for ppx900 I am in a position to E-mail to you.
        : Pete

        Pete,

        If your still around would you kindly email me a copy of that schematic for the ppx900 to [email protected] ..

        Thank you very much
        -Greg

        ps: I’ve also followed this request to your email, hope you don’t mind.

    1. Re: I need shematic for Crate GX 65
      Murilo Caldas

      Hello! I have a Crate Gx-65 guitar amplifier,
      >and the
      > motherboard’s had a problem, because of a short circuit. I need its
      > schematic. Could you send it to me, please? Thank you so much!

      Murilo Caldas

      Fortaleza, Ceara – Brasil

    2. Re: I need shematic for Crate GX 65
      Murilo Caldas

      : I need shematic for Crate GX 65,if you have it please send me,thanx
      BRASIL. Olá nao recebi, pode me enviar de novo. Só falo PORTUGUÊS. Deus te abençoe

    1. Re: Seeking Maxon AD-900 Schematics
      acun

      : Anybody have an idea where I can get teh schematics for the Maxon Vintage AD-900 Analog Delay? If so, please e-mail me!!!

      1. Re: Seeking Maxon AD-900 Schematics
        Fiddi

        : : Anybody have an idea where I can get teh schematics for the Maxon Vintage AD-900 Analog Delay? If so, please e-mail me!!!
        – i am looking for the schematic , too – i know source for delay chip
        Mn 3008

      1. Re: i need a digitech rp1 manual
        Steve W

        : : please please help me some one please

        : If you now have it, could you send me the manual RP1 too
        : thanks ( [email protected])

        Hi guys, I have the Digitech RP1 manual if you still need one let me know, I can make copies.

              1. Re: schmematic marshall vs100 combo
                Tom

                : : : : : : i need the schematics for my marshall vs100 combo!! can you help me?

                : : : : : : many thanx

                My Marchall valvestate VS-100 is also defective , please mail me the schematics.

                Thanks , Tom

  5. help
    mark garvida

    i need a schematic diagram of dod supra metal , i have to fix it and theres no one who knows about guitar effects here in valenzuela philippines. ty

    1. Introduce a reliable PCB supplier to you
      bessie

      Dear Sir or Madamn,

      Thanks for sharing your time !

      This is bessie from HITEK and I got know your information from Made-In-China , and judge that you may have demand for PCB , so please allow me to introduce
      our company HITEK to you as a reliable PCB supplier :

      HITEK which is a professional PCB&PCBA manufacturer with more than 12 years experience in shenzhen, China and we have a high level of customer satisfaction from our clients from Germany, USA,Canada,Russian,etc.Our facilities have ISO 9001:2000 and UL certifications.

      We are interest in establishing business relations on PCB&PCBA with your company in the coming days with best quality,service and competitive price. We’ll provide a quick response to your inquiries–quotations can be replied in 2 to 4 days for parts and in 2hours for PCB(If this is a normal board). And we sign an NDA agreement with all of our clients for a hassle-free cooperation.

      If you have any questions,please feel free to tell us,we will try our best to serve you.

      I looking forward to hearing from you! (if you do not handle PCB,PCBA,please help me to transfer to your purchasing Dept or others who need.I am so sorry to disturb you.) Thank you.

    2. Re: MT2 Schematic & PCB layout
      sk8erli

      go to diystompboxes.com/pedals/schematics.html after that go down to the B’s(alphabetical order I think) then look for Boss. There’s a listing for a Boss MT-2 schematic. You should at least try searcing for the schematics instead of begging for them. It only took me an hour.

    1. Re: systech harmonic energizer schematic needed
      Bill

      : I just found an systech harmonic energize and i need to identify a pot called "center frequency". I think that is a tone pot. It has been removed and two cables with jacks are in its place (i think a rocker pedal was used in its place of the pot.). I need the schematics or a good guess what the type and style of pot used.
      :
      : Thanks
      : Craig
      Hi Craig ..I worked for Systech back in the 70’s and I may have what you are looking for … are you still looking?

      1. Re: systech harmonic energizer schematic needed
        Kent Iverson

        Hello Bill,

        I’d love to be able to source a copy of the schematic since I’ll never be able to find one for less than $450. However, being a tech, I could certainly build one. I only need the Harmonic Energizer and the 7026 Dual Phaser (rackmount) to complete my collection 😀

        If you could help me in my quest, please drop me a line at " beta kent at hotmail.com " (all one word, naturally)

        Thanks and best regards,

        Kent

    2. Re: This popular thread has been given its own page :... craig
      craig

      I just found an systech harmonic energize and i need to identify a pot called "center frequency". I think that is a tone pot. It has been removed and two cables with jacks are in its place (i think a rocker pedal was used in its place of the pot.). I need the schematics or a good guess what the type and style of pot used.

      Thanks
      Craig

    1. Re: 2112 digitech shematic
      Abimael Carvalho

      : I have a problem with my 2112 and I need it to be repaired.
      I need the 2112 schematic and the control one pedal schematic
      : Thanks

      1. Digitech 2112 digitech schematic
        TJ

        : : I have a problem with my 2112 and I need it to be repaired.
        : I need the 2112 schematic and the control one pedal schematic
        : : Thanks

  6. marshall 5212
    mike martone

    Hey,
    I need a schematic for a marshall 5212 (GAK!) solid state piece of garbage. If anybody has one or knows where to get one, I’d appreciate it very much

    Thanks in advance

    1. Re: schematic for spirit
      WS

      : I need a schematic diagram for SPIRIT POWER STATION BY SOUNDCRAFT , Thank you .

      Did you find a schematic for the Power Station? If so please forward it to me. I need one as well. WS

  7. I change my DODFX86 scheme (from DOD) for some simple marshall speaker simulator
    Cesar del Aguila

    I need some marshall speaker simulator to use with non-guitar speakers. I have the FX86 scheme (original).

  8. I need a schematic for a Dod fx 59
    Rob

    where can I find a schematic for a dod fx 59 Thrash Master. I think Ive managed to short the supplies in a freak accident. Someone help me please!?!?!?!

    1. Re: I need a schematic for a Dod fx 59
      bruno brimbal

      : where can I find a schematic for a dod fx 59 Thrash Master. I think Ive managed to short the supplies in a freak accident. Someone help me please!?!?!?!
      me too bruno france

    1. Re: Guitar
      guzman

      i need aschematic diagram for wireless guitar . by the i like dis website and more interesting in electronics please i need a diagram thank u very much

  9. Digitech GSP 21 FOOT CONTROLER SCHEMATIC
    Cristiano

    I am a guitarist from Brazil…i need a Digitech GSP 21 FOOT CONTROLER SCHEMATIC. send me if have please..tanx

    1. Re: I need a schematich for a DOD FX58 (metal maniac)
      Dicky

      : Hello, i got a problem with this Distor, the basic problem is that the Distosion never finish, I mean, always is on and then , always i get a distorsion

      1. I need a schematic for a DOD FX58 (metal maniac)
        leo

        : : Hello, i got a problem with this Distor, the basic problem is that the Distosion never finish, I mean, always is on and then , always i get a distorsion

      2. Re: I need a schematich for a DOD FX58 (metal maniac)
        reverb

        : : Hello, i got a problem with this Distor, the basic problem is that the Distosion never finish, I mean, always is on and then , always i get a distorsion

        1. Re: I need a schematich for a DOD FX58 (metal maniac)
          asa

          try to open distortion and you will sea the microswich under the plastic part where you turn distortion on , try to replace it with the new one

    2. Re: This popular thread has been given its own page :... Oscar Espinoza
      Oscar Espinoza

      Hello, i got a problem with this Distor, the basic problem is that the Distosion never finish, I mean, always is on and then , always i get a distorsion

Leave a Reply