could you please email me the price (and picture) of the 60s/70s colorsound wah wah pedal and any other pedals, maybe fuzz pedals, i am interested in buying one of your products.
Hey . I am looking for a schematic for the marshall p801 double foot switch , it switches from clean to dirty channel and it switches effects off and on . in a marshall MG series amp, I want to build a remote switching device from a car remote that I have
I was online searching for a schem for this particular amp (performer 650) and noticed your post. If you still happen to have the schematic and would be willing to send it to me, it would be much appreciated. Thanks.
Eric
: Hi’
: I’ve got a schematic for fender performer 650 in english.
: sent me your mail adress and ill ´send it to you if needed
: best regards
: Mikkel
: : hello , i try to find a schematic for fender performer 650 , for repar
: : have you information ??
: : best regards
: I was online searching for a schem for this particular amp (performer 650) and noticed your post. If you still happen to have the schematic and would be willing to send it to me, it would be much appreciated. Thanks.
: Eric
:
: : Hi’
: : I’ve got a schematic for fender performer 650 in english.
: : sent me your mail adress and ill ´send it to you if needed
: : best regards
: : Mikkel
: : : hello , i try to find a schematic for fender performer 650 , for repar
: : : have you information ??
: : : best regards
: : I was online searching for a schem for this particular amp (performer 650) and noticed your post. If you still happen to have the schematic and would be willing to send it to me, it would be much appreciated. Thanks.
: : Eric
:
: :
: : : Hi’
: : : I’ve got a schematic for fender performer 650 in english.
: : : sent me your mail adress and ill ´send it to you if needed
: : : best regards
: : : Mikkel
: : : : hello , i try to find a schematic for fender performer 650 , for repar
: : : : have you information ??
: : : : best regards
: : : : rudy
Hi.
If anyone can, please send me the schematics for the performer 650 to this mail: [email protected]
Thank’s ! 🙂
Please could you send me the Boss MT-2 schematics, i’m trying to repair my guitar effects without spending too much money. Thank You
: I´m from Argentina. I HAVE MT2 schematics and in a few weeks I will finish the PCB design and the prototype circuit.
: Please be patient and contact to me for send the OrCad files to you.
Re: This popular thread has been given its own page :... Andres
Andres
I´m from Argentina. I HAVE MT2 schematics and in a few weeks I will finish the PCB design and the prototype circuit.
Please be patient and contact to me for send the OrCad files to you.
Re: This popular thread has been given its own page :... Ian
Ian
I need the circuit diagrams for a Citronic PPX900 power amplifier and an Alesis M EQ 230 graphic equalizer. Any info would be much appreciated. Thanks, Ian.
Hello! I have a Crate Gx-65 guitar amplifier,
>and the
> motherboard’s had a problem, because of a short circuit. I need its
> schematic. Could you send it to me, please? Thank you so much!
: I need shematic for Crate GX 65,if you have it please send me,thanx
BRASIL. Olá nao recebi, pode me enviar de novo. Só falo PORTUGUÊS. Deus te abençoe
: : Anybody have an idea where I can get teh schematics for the Maxon Vintage AD-900 Analog Delay? If so, please e-mail me!!!
– i am looking for the schematic , too – i know source for delay chip
Mn 3008
This is bessie from HITEK and I got know your information from Made-In-China , and judge that you may have demand for PCB , so please allow me to introduce
our company HITEK to you as a reliable PCB supplier :
HITEK which is a professional PCB&PCBA manufacturer with more than 12 years experience in shenzhen, China and we have a high level of customer satisfaction from our clients from Germany, USA,Canada,Russian,etc.Our facilities have ISO 9001:2000 and UL certifications.
We are interest in establishing business relations on PCB&PCBA with your company in the coming days with best quality,service and competitive price. We’ll provide a quick response to your inquiries–quotations can be replied in 2 to 4 days for parts and in 2hours for PCB(If this is a normal board). And we sign an NDA agreement with all of our clients for a hassle-free cooperation.
If you have any questions,please feel free to tell us,we will try our best to serve you.
I looking forward to hearing from you! (if you do not handle PCB,PCBA,please help me to transfer to your purchasing Dept or others who need.I am so sorry to disturb you.) Thank you.
go to diystompboxes.com/pedals/schematics.html after that go down to the B’s(alphabetical order I think) then look for Boss. There’s a listing for a Boss MT-2 schematic. You should at least try searcing for the schematics instead of begging for them. It only took me an hour.
: I just found an systech harmonic energize and i need to identify a pot called "center frequency". I think that is a tone pot. It has been removed and two cables with jacks are in its place (i think a rocker pedal was used in its place of the pot.). I need the schematics or a good guess what the type and style of pot used.
:
: Thanks
: Craig
Hi Craig ..I worked for Systech back in the 70’s and I may have what you are looking for … are you still looking?
I’d love to be able to source a copy of the schematic since I’ll never be able to find one for less than $450. However, being a tech, I could certainly build one. I only need the Harmonic Energizer and the 7026 Dual Phaser (rackmount) to complete my collection 😀
If you could help me in my quest, please drop me a line at " beta kent at hotmail.com " (all one word, naturally)
Re: This popular thread has been given its own page :... craig
craig
I just found an systech harmonic energize and i need to identify a pot called "center frequency". I think that is a tone pot. It has been removed and two cables with jacks are in its place (i think a rocker pedal was used in its place of the pot.). I need the schematics or a good guess what the type and style of pot used.
Hey,
I need a schematic for a marshall 5212 (GAK!) solid state piece of garbage. If anybody has one or knows where to get one, I’d appreciate it very much
where can I find a schematic for a dod fx 59 Thrash Master. I think Ive managed to short the supplies in a freak accident. Someone help me please!?!?!?!
: where can I find a schematic for a dod fx 59 Thrash Master. I think Ive managed to short the supplies in a freak accident. Someone help me please!?!?!?!
me too bruno france
i need aschematic diagram for wireless guitar . by the i like dis website and more interesting in electronics please i need a diagram thank u very much
Re: I need a schematich for a DOD FX58 (metal maniac)
Dicky
: Hello, i got a problem with this Distor, the basic problem is that the Distosion never finish, I mean, always is on and then , always i get a distorsion
: : Hello, i got a problem with this Distor, the basic problem is that the Distosion never finish, I mean, always is on and then , always i get a distorsion
Re: I need a schematich for a DOD FX58 (metal maniac)
reverb
: : Hello, i got a problem with this Distor, the basic problem is that the Distosion never finish, I mean, always is on and then , always i get a distorsion
Re: This popular thread has been given its own page :... Oscar Espinoza
Oscar Espinoza
Hello, i got a problem with this Distor, the basic problem is that the Distosion never finish, I mean, always is on and then , always i get a distorsion
I need a schematic of Colorsound Wah Wah, this pedal have only one transistor…send me e-mail please ok?…Thanx
could you please email me the price (and picture) of the 60s/70s colorsound wah wah pedal and any other pedals, maybe fuzz pedals, i am interested in buying one of your products.
many thanks ashley carr
10x
i need pcb noise gate MXR
I have ORIGINAL schematic and pcb MT2
i need PCB – DOD FX 86 (death metal)
contact me
please send me schematic and pcb MT2.
i have built one. I havent compared to an original side-by side yet, but it sure sounds alike.
email me and ill send the schematics to you
I need schematic of mesa boogie triple rectifire dual channel
Please I need OD-1, and MT-2 eletronic scheme. help-me if it´s posible, thank you very mush. [email protected]
i have schematic and PCB BOSS MT2
: i have schematic and PCB BOSS MT2
: : i have schematic and PCB BOSS MT2
may I get it from you??please send to me at : [email protected]
: Please I need OD-1, and MT-2 eletronic scheme. help-me if it´s posible, thank you very mush. [email protected]
please;if anybody who can give me this product,GOD blese you
Hey . I am looking for a schematic for the marshall p801 double foot switch , it switches from clean to dirty channel and it switches effects off and on . in a marshall MG series amp, I want to build a remote switching device from a car remote that I have
I’m looking for schematics the "cry baby 535Q".
If you know about it, please tell me.
: I’m looking for schematics the "cry baby 535Q".
any who have it please sendme by email
n d pcb if you have it
[email protected]
: : I’m looking for schematics the "cry baby 535Q".
: any who have it please sendme by email
: n d pcb if you have it
: [email protected]
hi!
did you manage to get the schematics and layout?
if you did , i would love to get them from you
THANKS
: : I’m looking for schematics the "cry baby 535Q".
: any who have it please sendme by email
: n d pcb if you have it
: [email protected]
[email protected]
please!
Who will send or mail me an repair schematic for Fender Performer 1000
You would make me very happy.
: Who will send or mail me an repair schematic for Fender Performer 1000
: You would make me very happy.
here you go not sure if it is the exact model but its prettymuch the exact same amplifier
http://www.fender.com/support/manuals/manuals.php
i need MT2 pcb and schematic ,please send it to my email
Thanks a lllllllllllllllllllllot!!!!!!!!!!!!!!!!!!!!!!!
I have ORIGINAL schematic and pcb MT2
: I have ORIGINAL schematic and pcb MT2
pls send me your diagram of metalzone,,, tnx
i need a valvestate vs 100 diagram and manual please, it´s URGENT, thanks
: I need a valvestate 100V model 8100 Marshall Amplification Diagram and Service manual please, it´s URGENT, many thanhs.
There’s one available at http://www.schematicconnection.com
Thanks … David
Boss OD-2R Turbo OverDrive
: : help! im in desperate need of a schematic for a Boss OD-2R Turbo OverDrive. can anyone help me!
ineed mt-2 schematic and pcb layout for DIYers
http://web.tiscali.it/boxsmt2clone2005home/
I need a Boss Metal Zone(MT2) and Boss Noise Supressor(NS2) schematic too… all you can send about these two… tks!
I have ORIGINAL schematic and pcb MT2 ans MS2
[email protected]
: I have ORIGINAL schematic and pcb MT2 ans MS2
: [email protected]
I need the original schematic of MT2 metal zone BOSS
i have schematic and PCB BOSS MT2
: I need a Boss Metal Zone(MT2) and Boss Noise Supressor(NS2) schematic too… all you can send about these two… tks!
: : I need a Boss Metal Zone(MT2) and Boss Noise Supressor(NS2) schematic too… all you can send about these two… tks!
: : : I need a Boss Noise Supressor(NS2) schematic (electronic circuit) all you can send about these two… tnx! PLEASE!
: : : : I need a Boss Noise Supressor(NS2) schematic (electronic circuit) all you can send about these two… tnx! PLEASE! [email protected]
help.I need service manuals or schematic diagram for all models of ps one.thanks
If you have DIGITECH GSP-21 SCHEMATIC : : Send my please by e-mail [email protected]
: If you have DIGITECH GSP-21 SCHEMATIC : : Send my please by e-mail [email protected]
: If you have DIGITECH GSP-21 SCHEMATIC : : Send my please by e-mail [email protected]
: If you have DIGITECH GSP-21 SCHEMATIC : : Send my please by e-mail [email protected]
I need boss mt-2 pcb&schematic thank you!
can you help me ?
I have ORIGINAL schematic and pcb MT2 ans MS2
contact me
[email protected]
: I need boss mt-2 pcb&schematic thank you!
: can you help me ?
i have original schematic and PCB BOSS MT2
I also need Boss MT-2 Schematic and PCB, Please send schematics or a way to get ahold of the schematics to [email protected]. Thanks
I also need Boss MT-2 Schematic and PCB, Please send schematics or a way to get ahold of the schematics to [email protected] Thanks
i am looking for H&K "TUBEMAN2" schematic
thanks
Hi Jake,
Check out http://www.schematicconnection.com … there’s a copy available there …. thanks … David
hello , i try to find a schematic for fender performer 650 , for repar
have you information ??
best regards
rudy
Hi’
I’ve got a schematic for fender performer 650 in english.
sent me your mail adress and ill ´send it to you if needed
best regards
Mikkel
: hello , i try to find a schematic for fender performer 650 , for repar
: have you information ??
: best regards
: rudy
: Hi’
: I’ve got a schematic for fender performer 650 in english.
: sent me your mail adress and ill ´send it to you if needed
: best regards
: Mikkel
: : hello , i try to find a schematic for fender performer 650 , for repar
: : have you information ??
: :
Hi. I hope you can still read this.. could you send me the schematic for the fender performer 650.
[email protected]
many thanks!
Jay
: : Hi’
: : I’ve got a schematic for fender performer 650 in english.
: : sent me your mail adress and ill ´send it to you if needed
: : best regards
: : Mikkel
Hi Mikkel,
can you email a copy to me at: alton AT altonrex DOT com? Thanks! `alton
I was online searching for a schem for this particular amp (performer 650) and noticed your post. If you still happen to have the schematic and would be willing to send it to me, it would be much appreciated. Thanks.
Eric
: Hi’
: I’ve got a schematic for fender performer 650 in english.
: sent me your mail adress and ill ´send it to you if needed
: best regards
: Mikkel
: : hello , i try to find a schematic for fender performer 650 , for repar
: : have you information ??
: : best regards
: : rudy
: I was online searching for a schem for this particular amp (performer 650) and noticed your post. If you still happen to have the schematic and would be willing to send it to me, it would be much appreciated. Thanks.
: Eric
:
: : Hi’
: : I’ve got a schematic for fender performer 650 in english.
: : sent me your mail adress and ill ´send it to you if needed
: : best regards
: : Mikkel
: : : hello , i try to find a schematic for fender performer 650 , for repar
: : : have you information ??
: : : best regards
: : : rudy
: : I was online searching for a schem for this particular amp (performer 650) and noticed your post. If you still happen to have the schematic and would be willing to send it to me, it would be much appreciated. Thanks.
: : Eric
:
: :
: : : Hi’
: : : I’ve got a schematic for fender performer 650 in english.
: : : sent me your mail adress and ill ´send it to you if needed
: : : best regards
: : : Mikkel
: : : : hello , i try to find a schematic for fender performer 650 , for repar
: : : : have you information ??
: : : : best regards
: : : : rudy
Hi.
If anyone can, please send me the schematics for the performer 650 to this mail:
[email protected]
Thank’s ! 🙂
Please send me an email if you have copy of this manual, or can send along. Thanks
Joybuzzer@scDOTrrDOTcom
Looking for a schematic for a Digitech FS-300
Any help appreciated
: Looking for a schematic for a Digitech FS-300
: Any help appreciated
I have the right drawing. Just e-mail me for it.
e-mail is [email protected]
Hi. Does anyone have a wiring diagram for a Gibson EB3 bass? Please e-mail it to me if you do. I need to fix my bass soon. Thanks!- C in Tulsa, OK
: Hi. Does anyone have a wiring diagram for a Gibson EB3 bass? Please e-mail it to me if you do. I need to fix my bass soon. Thanks!- C in Tulsa, OK
: : Hi. Does anyone have a wiring diagram for a Gibson EB3 bass? Please e-mail it to me if you do. I need to fix my bass soon. Thanks!- C in Tulsa, OK
have you found a diagram yet? I have one. Free!
[email protected]
http://www.gibsonbass.com/graphics/eb3-circuit.gif
Hello, Did you ever find a diagram. I could sure use a copy. Thanks, Stan
: Hello, Did you ever find a diagram. I could sure use a copy. Thanks, Stan
Did ya ever find a diagram?
i have one…free!
[email protected]
This popular thread has been given its own page : I HAVE MT2 schematics
I have ORIGINAL schematic and pcb MT2 ans NS2
contact me
[email protected]
Hi. I’m from Polnd. Could you send me the MT-2 PCB layout?
It’s very important for me. 🙂
Please could you send me the Boss MT-2 schematics, i’m trying to repair my guitar effects without spending too much money. Thank You
: I´m from Argentina. I HAVE MT2 schematics and in a few weeks I will finish the PCB design and the prototype circuit.
: Please be patient and contact to me for send the OrCad files to you.
I also need the Boss MT-2 PCB schematics. Could you please send the schematics or a way to get a hold of the schematics to [email protected]? Thanks
please email me your schem,ok..
i have ibanez OD-III
I´m from Argentina. I HAVE MT2 schematics and in a few weeks I will finish the PCB design and the prototype circuit.
Please be patient and contact to me for send the OrCad files to you.
i am looking for the diagram of a head of jcm800 so to make one myself
I need a schematic diagram for Roland Boss PH-2 guitar pedal. Help! I will be very obliged, very happy, very very very… Thanx for all.
I need the schematics of dod fx-70 metal x. Someone can help me?
: I need image wirings of dod fx-70 metal x. Someone can help me?
This popular thread has been given its own page : schematic required
: If you still need schematic for ppx900 I am in a position to E-mail to you.
Pete
: : If you still need schematic for ppx900 I am in a position to E-mail to you.
: Pete
If you still have a schematic for ppx900 would you be in a position to E-mail to me.
Hi! I too are looking for a PPX schematic , would you be so kind to email one to my too?
Regards , Kjell.
: : If you still need schematic for ppx900 I am in a position to E-mail to you.
: Pete
Pete,
If your still around would you kindly email me a copy of that schematic for the ppx900 to [email protected] ..
Thank you very much
-Greg
ps: I’ve also followed this request to your email, hope you don’t mind.
: I too am looking for the circuit diagram for an Alesis M EQ 230 graphic equalizer. Again – any info would be much appreciated. Thanks, Nigel.
I need the circuit diagrams for a Citronic PPX900 power amplifier and an Alesis M EQ 230 graphic equalizer. Any info would be much appreciated. Thanks, Ian.
Related News:
Alesis USB Drum Kit
I need shematic for Crate GX 65,if you have it please send me,thanx
Hello! I have a Crate Gx-65 guitar amplifier,
>and the
> motherboard’s had a problem, because of a short circuit. I need its
> schematic. Could you send it to me, please? Thank you so much!
Murilo Caldas
Fortaleza, Ceara – Brasil
same thing happend to me
: I need shematic for Crate GX 65,if you have it please send me,thanx
BRASIL. Olá nao recebi, pode me enviar de novo. Só falo PORTUGUÊS. Deus te abençoe
I play bass, looking for any cool project ideas…. email me
I play bass, looking for any cool project ideas…. email me
I play bass, looking for any cool project ideas…. email me
This popular thread has been given its own page : i need a schematic for Boss ns-2
: i need a PCB for Boss ns-2.
: Thanks.
Róbert Kovács
[email protected]
I have ORIGINAL schematic and pcb MT2 ans NS2
contact me
[email protected]
Please email me the schematic if you can. Much appreciated. – Luna
: I have ORIGINAL schematic and pcb MT2 ans NS2
: contact me
: [email protected]
: Please email me the schematic if you can. Much appreciated. – Luna
:
: : I have ORIGINAL schematic and pcb MT2 ans NS2
: : contact me
: : [email protected]
: i need a electrical schematic diagram for Boss ns-2 or any guitar amplifier for my school project
: Thanks.
i need a schematic for Boss ns-2.
Thanks.
Anybody have an idea where I can get teh schematics for the Maxon Vintage AD-900 Analog Delay? If so, please e-mail me!!!
: Anybody have an idea where I can get teh schematics for the Maxon Vintage AD-900 Analog Delay? If so, please e-mail me!!!
: : Anybody have an idea where I can get teh schematics for the Maxon Vintage AD-900 Analog Delay? If so, please e-mail me!!!
– i am looking for the schematic , too – i know source for delay chip
Mn 3008
please please help me some one please
: satisfazer por favor ajudam-me que alguém satisfaz
eu quero um manual digitch rp-1
I need to locate a service manual for the
RP1 (SWITCHER)
Thanks
: please please help me some one please
I wnat too, if you have, send to me, please!
This popular thread has been given its own page : Re: i need a digitech rp1 manual
: : please please help me some one please
: If you now have it, could you send me the manual RP1 too
: thanks ( [email protected])
: : : please please help me some one please
: : If you now have it, could you send me the manual RP1 too
: : thanks ( [email protected])
http://www.manualnguide.com/dl/2754/ Just paste the link hope that helps
: : satisfazer por favor ajudam-me que alguém satisfaz: Se você o tivesse agora, poderia você emitir-me o RP1 manual demasiado: agradecimentos ([email protected])
: : please please help me some one please
: If you now have it, could you send me the manual RP1 too
: thanks ( [email protected])
Hi guys, I have the Digitech RP1 manual if you still need one let me know, I can make copies.
: : please please help me some one please
: If you now have it, could you send me the manual RP1 too
: thanks ( [email protected])
here :
http://www.digitech.com/ftp_mirror/PDFs/Discontinued/Manuals/RP1Manual.pdf
: : : please please help me some one please
: : If you now have it, could you send me the manual RP1 too
: : thanks ( [email protected])
: here :
: http://www.digitech.com/ftp_mirror/PDFs/Discontinued/Manuals/RP1Manual.pdf
YO. YOUR LINK IS NO LONGER THERE. WELL, I FOUND THIS WORKS FOR ME.
http://FTP.DIGITECH.COM WILL BRING YOU ALL TO THE MANUALS
: please please help me some one please
If you now have it, could you send me the manual RP1 too
thanks ( [email protected])
i need the schematics for my marshall vs100 combo!! can you help me?
many thanx
If you have the schematic send me it please. Thanks
: i need the schematics for my marshall vs100 combo!! can you help me?
: many thanx
: : i need the schematics for my marshall vs100 combo!! can you help me?
: : many thanx
: : : i need the schematics for my marshall vs100 combo!! can you help me?
: : : many thanx
: : : : i need the schematics for my marshall vs100 combo!! can you help me?
: : : : many thanx
: : : : : i need the schematics for my marshall vs100 combo!! can you help me?
: : : : : many thanx
: : : : : : i need the schematics for my marshall vs100 combo!! can you help me?
: : : : : : many thanx
My Marchall valvestate VS-100 is also defective , please mail me the schematics.
Thanks , Tom
i need a schematic diagram of dod supra metal , i have to fix it and theres no one who knows about guitar effects here in valenzuela philippines. ty
need schematic to identify board parts Q1 AND D1
need schematic to identify board parts Q1 AND D1
This popular thread has been given its own page : MT2 Schematic & PCB layout
Dear Sir or Madamn,
Thanks for sharing your time !
This is bessie from HITEK and I got know your information from Made-In-China , and judge that you may have demand for PCB , so please allow me to introduce
our company HITEK to you as a reliable PCB supplier :
HITEK which is a professional PCB&PCBA manufacturer with more than 12 years experience in shenzhen, China and we have a high level of customer satisfaction from our clients from Germany, USA,Canada,Russian,etc.Our facilities have ISO 9001:2000 and UL certifications.
We are interest in establishing business relations on PCB&PCBA with your company in the coming days with best quality,service and competitive price. We’ll provide a quick response to your inquiries–quotations can be replied in 2 to 4 days for parts and in 2hours for PCB(If this is a normal board). And we sign an NDA agreement with all of our clients for a hassle-free cooperation.
If you have any questions,please feel free to tell us,we will try our best to serve you.
I looking forward to hearing from you! (if you do not handle PCB,PCBA,please help me to transfer to your purchasing Dept or others who need.I am so sorry to disturb you.) Thank you.
http://www.guitare-tech.com , effect boss mt2 , tech21 , noise gate , marshall speakersimulator….
webmaster , [email protected]
: I need MT2 schematic and PCB layout. Can you help me?
: : I need hm.2 schematic and PCB layout. Can you help me?
http://web.tiscali.it/boxsmt2clone2005home/index.htm
I have ORIGINAL schematic and pcb MT2 ans NS2
contact me
[email protected]
: I need MT2 schematic and PCB layout. Can you help me?
: : I need MT2 schematic and PCB layout. Can you help me?
I have schematic and pcb
contact me
: I have schematic and pcb
: contact me
can you give me the PCB, schematic and layout???
: I need schematic and pcb boss mt-2
go to diystompboxes.com/pedals/schematics.html after that go down to the B’s(alphabetical order I think) then look for Boss. There’s a listing for a Boss MT-2 schematic. You should at least try searcing for the schematics instead of begging for them. It only took me an hour.
I need MT2 schematic and PCB layout. Can you help me?
This popular thread has been given its own page : systech harmonic energizer schematic needed
: I just found an systech harmonic energize and i need to identify a pot called "center frequency". I think that is a tone pot. It has been removed and two cables with jacks are in its place (i think a rocker pedal was used in its place of the pot.). I need the schematics or a good guess what the type and style of pot used.
:
: Thanks
: Craig
Hi Craig ..I worked for Systech back in the 70’s and I may have what you are looking for … are you still looking?
Hello Bill,
I’d love to be able to source a copy of the schematic since I’ll never be able to find one for less than $450. However, being a tech, I could certainly build one. I only need the Harmonic Energizer and the 7026 Dual Phaser (rackmount) to complete my collection 😀
If you could help me in my quest, please drop me a line at " beta kent at hotmail.com " (all one word, naturally)
Thanks and best regards,
Kent
I just found an systech harmonic energize and i need to identify a pot called "center frequency". I think that is a tone pot. It has been removed and two cables with jacks are in its place (i think a rocker pedal was used in its place of the pot.). I need the schematics or a good guess what the type and style of pot used.
Thanks
Craig
I have a problem with my 2120 and I need it to be repaired.
I need the 2120 schematic and the control one pedal schematic
Thanks
: I have a problem with my 2112 and I need it to be repaired.
I need the 2112 schematic and the control one pedal schematic
: Thanks
: : I have a problem with my 2112 and I need it to be repaired.
: I need the 2112 schematic and the control one pedal schematic
: : Thanks
http://www.eserviceinfo.com/downloadsm/43723/Digitech_2120.html
plzzzzzzzz….. I need help with my quad someone plzzzzzz send me some schematics’
Hey,
I need a schematic for a marshall 5212 (GAK!) solid state piece of garbage. If anybody has one or knows where to get one, I’d appreciate it very much
Thanks in advance
Hi.
Please, does anybody know where I can find the DOD D12 schematics?
Thank you
Ciccio
I need a schematic diagram for SPIRIT POWER STATION BY SOUNDCRAFT , Thank you .
: I need a schematic diagram for SPIRIT POWER STATION BY SOUNDCRAFT , Thank you .
Did you find a schematic for the Power Station? If so please forward it to me. I need one as well. WS
I need some marshall speaker simulator to use with non-guitar speakers. I have the FX86 scheme (original).
I have ORIGINAL schematic and pcb MT2 ans NS2
contact me
[email protected]
I need the FX86 schema (original).
Please help me.
tanks
sorry for my bad english
I have ORIGINAL schematic and pcb MT2 ans NS2
contact me
[email protected]
where can I find a schematic for a dod fx 59 Thrash Master. I think Ive managed to short the supplies in a freak accident. Someone help me please!?!?!?!
: where can I find a schematic for a dod fx 59 Thrash Master. I think Ive managed to short the supplies in a freak accident. Someone help me please!?!?!?!
me too bruno france
Salut mon ami !
Normal de te retrouver sur ce style de site
[email protected]
@ bientot
i would like to know about wiring and schematic for wireless guitar thank u very very much
i need aschematic diagram for wireless guitar . by the i like dis website and more interesting in electronics please i need a diagram thank u very much
i need uhf trans&receiv for wireless guitar
I need a shematic of a UHF transmission (and receptor) for guitar
I am a guitarist from Brazil…i need a Digitech GSP 21 FOOT CONTROLER SCHEMATIC. send me if have please..tanx
This popular thread has been given its own page : I need a schematich for a DOD FX58 (metal maniac)
: Hello, i got a problem with this Distor, the basic problem is that the Distosion never finish, I mean, always is on and then , always i get a distorsion
let me know if you find it i need it to.
: : Hello, i got a problem with this Distor, the basic problem is that the Distosion never finish, I mean, always is on and then , always i get a distorsion
I need a schematic for a DOD FX56 b (super american metal )and layout
: I need a schematic for a DOD FX56 b (super american metal )and layout
: : I need a schematic for a DOD FX56 b (super american metal )and layout
: : : I need a schematic for a DOD FX56 b (super american metal )and layout
: : : : I need a schematic for a DOD FX56 b (super american metal )and layout [email protected]
: : Hello, i got a problem with this Distor, the basic problem is that the Distosion never finish, I mean, always is on and then , always i get a distorsion
try to open distortion and you will sea the microswich under the plastic part where you turn distortion on , try to replace it with the new one
Hello, i got a problem with this Distor, the basic problem is that the Distosion never finish, I mean, always is on and then , always i get a distorsion
can anyone give me a cool metal setting for the mt2?