Re: Need Schematics or Service Manual for Jim Donlop - Rotovibe (JD-4S) or some help :)

In Reply to: Need Schematics or Service Manual for Jim Donlop - Rotovibe (JD-4S) or some help :) posted by gerry on March 11, 2007 at 22:52:01:

: I was just wondering if any of you guys have any experience with the
: Jim Donlop - Rotovibe (JD-4S) A budy of mine slapped a 12 Volt power
: pack to his and it was rated for only 9 volts, and as you know the
: air filled with that smell we have all run into at some point or
: another and it is always followed by the words....Aahhhhh Crap!.

: I'm looking for the Service manual or the schematics for the JD-4S pedal. If anyone can give a hand that would be great.

: I replaced the MPSA18 that was completely FRIED with a 2SC1815. A
: 100uf 16Volt Electrolytic Cap I also replaced with a 100uf 25Volt. I
: pluged in a 1/4 inch patchcord to activate the pedal but it still
: doesn't seem to power up. (Red LED is off)

: Any of you run into this situation before?

: Any help would be appreciated.

: -Gerry

Follow Ups:

Post a Followup