Click to visit Sweetwater Click to visit Gearank

Guitar parts forum

While maintaining a page for Schaller parts, I found out that many people have questions I can’t answer by myself. Unfortunately, turning to manufacturer doesn’t always mean getting any reply, too…

That’s why I launched this forum and hope it may help somebody the answers he(she) needs.

I no longer run the forum, but you can discuss everything here (not Schaller’s stuff only).

There is only one but: that “everything” should be about guitar/bass or other stringed instruments building, repair etc.

369 thoughts on “Guitar parts forum”

  1. help finding what my guitar is worth and its age
    chris

    hi my name is chris i came across a washburn G-1V a couple of years ago and had to get it has the line locks at the top of the neck and a floyd rose bridge. It only has one single dual pickup and a knob only for volume adjustment. I cant find out anything about it though can somebody please help me out? thx email me at [email protected]

  2. Ibanez ATK 300 Bass Neck
    Myk Allen

    I’m looking for an original Ibanez ATK 300 bass neck. If anyone knows the whereabouts on how and where I can obtain one, please email me!.
    Thanks.

  3. Gibson Midnight Special parts
    Randy Wayne

    I’m looking for string ferrules for my ’74 Gibson Midnight Special. The ferrules are for the top, where the strings pass through the body. The Gibson L6-S Deluxe (not the Custom!) uses the same string-through-body system with (I think) the same ferrules. Does anyone have any parts from either of these models, or do you know where I might be able to find them?

      1. Re: This popular thread has been given its own page :... Boltron
        Boltron

        : I’m looking for string ferrules for my ’74 Gibson Midnight Special. The ferrules are for the top, where the strings pass through the body. The Gibson L6-S Deluxe (not the Custom!) uses the same string-through-body system with (I think) the same ferrules. Does anyone have any parts from either of these models, or do you know where I might be able to find them?

        Yes those actually are 5/32 rivets. I just went through the same guitar even same year. Also call stewart mac.com to check as I think I saw them there as well. I also installed telecaster ferrules on the back as the rear ferrules are the same as the top. So they are punched into that hole with not much else to secure the string end.

  4. khaler flyer tremolo springs
    MK

    I have a ‘Hohner professional ST graphite’ guitar. It’s a bit old but I like it enough.
    Unfortunately a little while ago it was closed in it’s case with the tremolo arm still on it and the springs have been stretched to the point of being useless.
    I’ve tried clipping the spring lengths but it doesn’t feel like the best answer at all.

    Does anyone know where I could get new replacements?

    Or (maybe) the original spring specs?

    (Hohner have not been able to help and Khaler’s website is being re-done)

    Many thanks.

      1. Re: Gibson Grabber Bass
        Jesse

        I personally have a 70s Gibson Grabber that was destroyed at a gig. I have the neck and pickups intact. I would be interested in that body.

        1. wondering about truss rod cover
          Hugh

          i was curious if your grabber had a truss rod cover. i’ve been trying to find a truss rod cover for a gibson grabber or epiphone ripper for my newer epiphone ripper bass. just curious if you’d like to get rid of it??? thanx a lot!!
          Hugh

  5. need kahler tremolo parts
    Renaud

    Hi! I’m french and hope I will be understood!!!
    I just happen to break one of the moving part that block the string on the Kahler tremolo (sorry don’t know the name of the part) of my Charvel CH4 guitar. Where can I buy parts. Please Email me any hint.

    1. Re: need kahler tremolo parts
      EDDY TOTTEN

      : Hi! I’m french and hope I will be understood!!!
      : I just happen to break one of the moving part that block the string on the Kahler tremolo (sorry don’t know the name of the part) of my Charvel CH4 guitar. Where can I buy parts. Please Email me any hint.

      TRY E-BAY , I BOUGHT PARTS ONLINE.

    2. Re: need kahler tremolo parts
      Andrew Stuart

      I am having the same problems owning a Model 6 Charvel. I am told that Fender now have the charvel/Jackson dealership but there are no links to suppliers other than the US & Canada as far as i can see. Good luck

    3. Re: need kahler tremolo parts
      Joseph

      It sounds like you are referring to the "nut blocks" and three screws that lock down the strings on the neck. I have only been able to find very similar looking parts for floyd rose locking nut but look close on http://www.allparts.com
      I do not yet know if these will fit. One of the screws that goes into the nut block became stripped and both pieces were lost. Now I am on a quest.

  6. Jackson Reverse headstock
    MATT

    Does anyone have a clue where I could find tuner keys for a reverse headstock. It seems to be non-existent. I’ve searched dozens of sites and searches.

    1. Re: Jackson Reverse headstock
      Tom Schulz

      : Does anyone have a clue where I could find tuner keys for a reverse headstock. It seems to be non-existent. I’ve searched dozens of sites and searches.

      Try the JCF classfieds. Some of the members there have parts to sell. You have to be a member with a 100 posts before you can post on the classifieds. I have two sets, but I’m retaining them at the moment.

  7. Need stock bridge for a ESP F-207 7 String
    Jared W

    I acquired a F-207 and it has been upgraded severly – im am a novice at guitar and it has a floating bridge on it that, due to being a novice, is causing a lot of problems – can anyone help me out? Thanks

  8. John Mayer guitar on "Room For Squares" cover?
    JamLD

    Hi,

    Can anyone tell me what kind of guitar is on the cover of John Mayer’s 2001 Room For Squares CD? I’ve searched all over the place and haven’t had any luck yet on finding out what kind of guitar it is.

    Any help would be greatly appreciated.

  9. Gibson SG Scratchplates
    Opey

    Hi, could anyone tell me a place in the uk where i can purchase a custom scratchplate for my Gibson Sg please.. i’m having a lot of trouble finding any to view, most places want you to submit artwork and charge you a fortune, i would just like to buy one off the rack.

  10. Musicmaster Neck/gibson grabber.
    Alex

    Right I live in the UK and am looking for a neck for a 1970’s short scale Fender Musicmaster bass. Anyone know where I can find one. Also I know its not quiet a guitar "part" anyone know of a Gibson Grabber bass going anywhere in UK?
    Chars.

  11. HELP WITH FLOYD ROSE
    sidharthshukla

    Hi.

    This is with reference to a particular Floyd Rose part.

    I have lost the string blocking nut which is found inside the saddle as a reult i cant play.

    NOw i have been told that there can be mahjor sixze variations depending on whether it is Original Floyd Rose or a licensed one. My Bridge just says "Floyd Rose"..so that would mean what/

    I am from India and cant get these parts here so will have to ask a friend to get them for me. Now i have two friends who can get it back…one is in New JErsey and the other in Cambridgeshire UK.

    Please email me at [email protected] to give me any tips or suggestions

    Thanking you all.

    1. Re: Gibraltar 1 Bridge
      Frank

      I have a couple Gib I bridges that I may part with, if the price is right. Are you still looking? The old one used to be gold. i also have a brand new never been used in gold as well complete with the studs and anchors.

      [email protected]

  12. jackson performer neck needed despratly
    Aaron

    im looking for a neck to a jackson performer and
    i have no idea where to start. if anyone can tell
    me where i might purchas this it would be very
    helpful.

  13. Ovation Beadwinner nut
    Gary Lynn

    I found this guitar at a yard sale it had 7 coats of paint an a bad
    repair on its broken neck Its all better now it has 9 coats of had rubbed white lacquer and it ready to go back together but I need a nut
    it was missing anyone have measurements or ideas?

    Gary

  14. Wilkinson parts
    David Nordon-Angus

    Hi
    Looking for source of/for spare saddle bolts for wilkinson trem. on Cort G260. These are the top fixing bolts (black) that take a hexagon key. Thanks

    1. Re: Kahler Parts
      Scott Mclellan

      Thanks for the info, I will email you at home. Trying to resurect a 20 year Charvel that I bought when I was 18 – 39 now and have been searching for part everywhere!

      Thanks Again
      Scott McLellan
      FF/EMT
      Kingston Fire

    2. Re: Kahler Parts
      galen michel

      I hope the offer hasn’t ended yet. I am looking for a complete kahler bass tremolo. I don’t know much about them so really anyone would do, I don’t have preferences. It just has to fit on a Fender jazz bass.

    3. Re: Kahler Parts
      Bill Ahrens

      Tony,

      I just found your site and am in need of a few parts for a Kahler 2700. I need 1 or 2 threaded posts that screw into the studs in the top of the guitar. If you have any leads or the ability to acquire these PLEASE contact me. I am VERY interested and will definitely buy them from you.

      Thanks.

      Bill Ahrens ([email protected])

    4. Re: Kahler Parts
      Josh Farris

      Tony I just bought a old fender prodigy that I thought had potential and I am looking to restore it. I notice that the Kahler spider double locking tremelo definitely needs to be rebuilt. The locking allen screws that it pivots off of are mismatched(cuasing it to be uneven) also it only has 2 springs on the bottom and I know the springs consist of complex compression that is very critical in the sound output(i think)and I am concerned with the expansion. And I also need a wammy-bar. I’m not familiar with the tremelo parts. Please get back to me ASAP for more info an this beuity and probably make some money to. (Just leave me with some specs I need to know)&
      part info

    5. Re: Kahler Parts
      Phil Georgas

      I need the locking nuts 2 of them with screws for the Kahler Spyder whammy that is on my circa 1987 Fender STRAT (the guitar they made with the humbucker at the bridge)
      Thanks for your help,
      Phil

      : If your looking for Kahler parts, please e-mail me and I will get back to you. Iam a friend of Gary Kahler and I will be working with him to get the Guitar business going. Gary has move his operation to Oceanside Ca. Iam from upstate NY. Please pass this on to all who need parts E-mail address at home:
      : [email protected]

      : Thanks
      : Tony Saccoia

      1. Re: Kahler Parts
        memphis mike

        I was at a loss, when a used custom guitar i bought came with a Non-Trem 3300 Kahler bridge. The micro tuning parts did not work on the "D" string; although it didn’t stop it from being used i wanted it fixed..i went surfing the internet and somehow got hooked up with Tony. He emailed me an exploded view drawing and I was able to tell him what parts i needed…he ordered them and even held on to them while i procrastinated payment…i finally got him the funds and he shipped out exactly what i needed…if you need anything for a Kahler, Tony can get it for you…btw, he’s a nice guy, also..

    6. Re: Kahler Tremelo Bridge Parts
      Steve Hilton

      I have a USA PAT 4457 201 DS Tremelo Bridge that needs a new string retention system. I can forward you a photo of the Bridge if you can help me or advise anyother avenue I can look for,I would be much appeciative..

      Best Regards

      Steve Hilton ( Australia)

    7. Re: Kahler Parts Need Fine tuner screw for Fender kahler trem bridge
      Justin Ferren

      : If your looking for Kahler parts, please e-mail me and I will get back to you. Iam a friend of Gary Kahler and I will be working with him to get the Guitar business going. Gary has move his operation to Oceanside Ca. Iam from upstate NY. Please pass this on to all who need parts E-mail address at home:
      : [email protected]

      : Thanks
      : Tony Saccoia

      1. Re: Kahler Parts Need Fine tuner screw for Fender kahler trem bridge
        luca

        : : If your looking for Kahler parts, please e-mail me and I will get back to you. Iam a friend of Gary Kahler and I will be working with him to get the Guitar business going. Gary has move his operation to Oceanside Ca. Iam from upstate NY. Please pass this on to all who need parts E-mail address at home:
        : : [email protected]

        : : Thanks
        : : Tony Saccoia

        i need 3 fine turners for my fender, i write from italy

      1. Re: Kahler Parts
        WPY

        : Hello Tony

        : I have a B.C. RICH Bitch N.J. series with a Khaler Flyer Tremelo and am missing one of the roller saddles. If there is anyway you could help me out it would be greatly appreciated.

        : Thank You

        : Brandon Gonzi

        : [email protected]
        : [email protected]

        If I’m doing this wrong–scuze me. A friend gave me his Les Paul to take a look at and it had a Kahler Spyder tremolo on it with a broken claw. I looked on the web and saw all these desperate folks who needed parts for their Kahlers–then I walked into a music store and they had the Kahler Parts kit and I got my claw for 99 cents. I told the owner I’d post his name but he asked me not to because he didn’t want a bunch of phone calls over $1.00 parts. I’ll be going by the shop again on December 8, and if there’s a part anyone needs, let me know and I’ll take a look. He does not have any trempolo bars and I’m not profiteering here. It’s just all you folks with broken Kahlers sounded so pitiful.

        Boy I hope I don’t get buried in e-mails.

        wpy

    8. Re: This popular thread has been given its own page :... Tony
      Tony

      If your looking for Kahler parts, please e-mail me and I will get back to you. Iam a friend of Gary Kahler and I will be working with him to get the Guitar business going. Gary has move his operation to Oceanside Ca. Iam from upstate NY. Please pass this on to all who need parts E-mail address at home:
      [email protected]

      Thanks
      Tony Saccoia

  15. looking for a kahler vibrato
    alan baisley

    I am currenly searching for a gold Kahler vibrato unit for a project guitar that I am building. Please contact me if you have one available at a reasonable price, and in good working order.

  16. '65 Gibson EB0 Palm Rest & Finger Rest needed
    Rick Stewart

    Greetings! Restoring a ’65 EB0, need to find the palm rest (I have sometimes seen it called a bridge cover and put over the bass, but it’s the metal plate that screws into the pickguard screw hole) as well as the curved finger rest. If anyone can assist I would greatly appreciate it. Thanks.

    1. Re: '65 Gibson EB0 Palm Rest & Finger Rest needed
      claudio Balbi

      : Greetings! Restoring a ’65 EB0, need to find the palm rest (I have sometimes seen it called a bridge cover and put over the bass, but it’s the metal plate that screws into the pickguard screw hole) as well as the curved finger rest. If anyone can assist I would greatly appreciate it. Thanks.

      Hello, I need to found the finger rest for my Gibson country gentleman ’89, if anyone can assist T would greatly appreciate it, Thanks a lot.

  17. 12-saddle tune-o-matic bridge?
    Raydar

    I’ve got a Dean Boca 12 electric 12-string; it has a regular 2-pin-mounted tune-o-matic bridge with 6 saddles, but with 2 notches in each saddle. This doesn’t make for great intonation. A Rickenbacker bridge won’t fit without modification. Anyone know who makes (or could make on special order) a bridge that will fit, or have any other ideas? Thanks!

    1. Re: 12-saddle tune-o-matic bridge?
      Dan

      : I’ve got a Dean Boca 12 electric 12-string; it has a regular 2-pin-mounted tune-o-matic bridge with 6 saddles, but with 2 notches in each saddle. This doesn’t make for great intonation. A Rickenbacker bridge won’t fit without modification. Anyone know who makes (or could make on special order) a bridge that will fit, or have any other ideas? Thanks!

      I know this post is ancient but maybe this will inspire someone who finds it. I just put this post out at:

      https://www.rickenbacker.com/forum_view_thread.asp?forum=Setup_And_Technical&Page=1&thread_id=3019&thread_name=Bridge%20adjustment%20question&p=p#146848

      For the 12 strings, being that the 12 saddle bridges come without notches anyway, why couldn’t one just renotch the thicker gauge wound string saddle slot on the 6 saddle bridge with the 2 notches on each?

      I’d be curious to know if anyone has tried this and what their results were.

      Dan

  18. Santana SE
    Ken Watson

    I need a 500k linear tone pot for a Santana SE. The Fender replacement is to big for the hole and I do not want to modify this guitar.

  19. gretsch atkins
    GARY LAYNE

    im looking for some parts for a gretsch chet atkins model. need a pick guard , 2 knobs , and bridge. if anybody knows where i could find these parts plese let me know

  20. URGENT: LO-TRS II saddle needed
    David Krantz

    I was changing my strings on my RG-320, and lo and behold one of the saddles cracks right in half…theres no way to fix it and I have a gig THIS FRIDAY…does anyone know where i can find just the saddle???

    thanks,
    david

  21. schaller amp schematic
    joe christie

    hi .. looking for a schematic for a schaller kv50 giutar amp.
    this amp is prior to 1967. i have a post 1967 and there are transistors in the pre amp.. mine is all tube……
    thanks…joe christie

  22. Kahler Spyder Tremelo for sale
    Leni Dimancari

    I purchased this rare trem to have installed on my tiger ESP. Bought at an auction. It comes with the original packaging, all parts, mint condition. Rather than auction it,I thought I would put the word out here first. If interested, email me.

    1. Re: Kahler Spyder Tremelo for sale
      George Wheelwright

      : I purchased this rare trem to have installed on my tiger ESP. Bought at an auction. It comes with the original packaging, all parts, mint condition. Rather than auction it,I thought I would put the word out here first. If interested, email me.
      Mate,i see your msg has been posted for a while,you’re probably married with children now lol, but in the off chnace you still have the khaler tremelo mentioned i would dearly like to buy it,cheers GEORGE. mail me [email protected]

      1. Re: Kahler Spyder Tremelo for sale
        Kirk

        If you still have the kahler spyder tremolo for sale I would appreciate it if you could e-mail me some pictures of it.

        1. Re: Kahler Spyder Tremelo for sale
          leni dimancari

          : If you still have the kahler spyder tremolo for sale I would appreciate it if you could e-mail me some pictures of it.

          I still have it. I will take digital photos of it and send it to you. It has never been installed. I bought it for myESP but I didnt want to cut the tiger finish, so its been in the bag since.

          1. Re: Kahler Spyder Tremelo for sale
            George Wheelwright

            : : If you still have the kahler spyder tremolo for sale I would appreciate it if you could e-mail me some pictures of it.

            : I still have it. I will take digital photos of it and send it to you. It has never been installed. I bought it for myESP but I didnt want to cut the tiger finish, so its been in the bag since.
            Mate,its been a while,yore married with children now lol but in the off chnace you still have your khaler tremelo i would dearly like to buy it,cheers GEORGE. [email protected]

      2. Re: Kahler Spyder Tremelo for sale
        Gary

        Hey Leni,

        Just wondering if the kahler trem is still for sale. I dont know if your one is the right model i`m looking for, any chance you could send me a photo of it? my address is 155 Moyville, Ballyboden Road< Dublin 16, Ireland. My guitar is a 1988 Jackson Charvel wiyh two humbucking pick ups,

        Cheers mate

        Gary

      3. Re: Kahler Spyder Tremelo for sale
        Emmanuel Pluguez

        : : I purchased this rare trem to have installed on my tiger ESP. Bought at an auction. It comes with the original packaging, all parts, mint condition. Rather than auction it,I thought I would put the word out here first. If interested, email me. **Will ship it overnight cashiers check is received. $100.00

        1. Re: Kahler Spyder Tremelo for sale
          bodhi (via moderator)

          : : : I purchased this rare trem to have installed on my tiger ESP. Bought at an auction. It comes with the original packaging, all parts, mint condition. Rather than auction it,I thought I would put the word out here first. If interested, email me. **Will ship it overnight cashiers check is received. $100.00

          I am very interested in this trem unit please email me or call my cell @803/312/4717 thanks

        2. Re: Kahler Spyder Tremelo for sale
          Keith Bell

          : : : I purchased this rare trem to have installed on my tiger ESP. Bought at an auction. It comes with the original packaging, all parts, mint condition. Rather than auction it,I thought I would put the word out here first. If interested, email me. **Will ship it overnight cashiers check is received. $100.00

          1. Re: Kahler Spyder Tremelo for sale
            Keith Bell

            : : : : I purchased this rare trem to have installed on my tiger ESP. Bought at an auction. It comes with the original packaging, all parts, mint condition. Rather than auction it,I thought I would put the word out here first. If interested, email me. **Will ship it overnight cashiers check is received. $100.00

            Please contact me as I’m interested but must make sure it is the correct part.
            Keith

      4. Re: This popular thread has been given its own page :... Leni Dimancari
        Leni Dimancari

        : I purchased this rare trem to have installed on my tiger ESP. Bought at an auction. It comes with the original packaging, all parts, mint condition. Rather than auction it,I thought I would put the word out here first. If interested, email me. **Will ship it overnight cashiers check is received. $100.00

  23. spare parts for Ibanez ATK 300
    John Gligo

    I need spare parts in great condition for the Ibanez ATK 300.
    I need an ATK bridge,ATK triple coil pickup,4 control pots,
    control knobs,toggle switch assembly,input jack,and the back
    plates.PLEASE EMAIL ME IF YOU HAVE THE FOLLOWING PARTS!!!!

  24. 1986 Fender Performer parts
    L.R. Jason Perez

    Hello all,
    I’m searching for a few parts for my 1986 Fender Performer (Japanese Strat?) Very rare guitar. I dont know who makes the tremolo/bridge. I was told that it might be Kaler or Floyd Rose. I actually just need the silver fine tuning pegs on the trem/bridge. Any ideas? Please email me at [email protected]
    Thanx a mil,

    1. Re: 1986 Fender Performer parts
      Rich

      : Hello all,
      : I’m searching for a few parts for my 1986 Fender Performer (Japanese Strat?) Very rare guitar. I dont know who makes the tremolo/bridge. I was told that it might be Kaler or Floyd Rose. I actually just need the silver fine tuning pegs on the trem/bridge. Any ideas? Please email me at [email protected]
      : Thanx a mil,

      Brother Performer owner: I’ve been asking the same questions. Mine needs one of the intonation adjustment screws and the temelo nut. If you find out anything please let me know. Fender has been no help at all.

      Sincerely,

      Rich Freund

  25. Kahler bass trem documents ?
    Fred

    … is there anyone outside to support me with kahler bass trem documents ? Give any information you have or send me a scan or message. THANX

  26. 7 string trem
    grA

    Ive got an RG7321 but I’m looking to put a locing trem in place off the fixed bridge. Can anyone recommend me one (a LO TRS7 would be fine I’m told) and where I can pick one up in the UK?

  27. Harmony Pickguard
    Scott

    Hi, I’m trying to find a pickguard for my friend’s Harmony brand guitar. I’m not sure the model though…but the guard has 2 slots for single coil pickups, and for 2 pots.
    Anyone that can help me I’d appreicate it.

    Thanks

    Scott

  28. Ibanez RG270DX Trem
    James Griffin

    I have an Ibanez RG270DX with a flotaing trem. Excuse my french, but this trem is shite. I was wondering if any knows whether I can simply replace it with a Lo-Pro, which I believe is much more stable tuning wise. If I can, does anyone know where i can buy one in the UK? Thanx.

    1. Re: Wilkinson Wigsby
      Phiga Guitars

      That’s because good old Ted had to split the country or face some serious tax evasion charges. His Wigsbies are made in Korea as are his guitars under the name Italia. Yes, it is his company. You can get parts if you are persistant. Your best bet is to e-mail them to death. The other alternative is to take it to a small machine shop. They should be able to tell you how to fix your problem. Phiga.

    2. Re: This popular thread has been given its own page :... Maui
      Maui

      I have an Italia Modina 2 guitar with a Wilkinson Wigsby tail piece vibrato.I need new bearings for it.Where might I find Wilkinson parts? Can’t seem to find anything on the net and Italia guitars will not answer their mail.

  29. ibanez gibraltar 1 bridge
    jindrich

    I am looking for original
    Gibraltar-1 bridge and tailpiece.
    I live i Prague / Czech Republic and I am owner of very beautiful
    Artist AR 500 guitar from 1981. I played this perfect guitar for nearly 20 years and a have to replace some mechanical parts which are getting very tired and unusable.
    I tryed to contact european dealers and USA as well…. no sucsess.

  30. ibanez gibraltar 1 bridge
    jindrich

    I am looking for original
    Gibraltar-1 bridge and tailpiece.
    I live i Prague / Czech Republic and I am owner of very beautiful
    Artist AR 500 guitar from 1981. I played this perfect guitar for nearly 20 years and a have to replace some mechanical parts which are getting very tired and unusable.
    I tryed to contact european dealers and USA as well…. no sucsess.

Leave a Reply