Interesting guitar repair articles, maintenance tips, guitar repair labor bluebook, what to look for when buying a guitar, great prices on select strings ,accessories, acoustic guitar pickups, cases and more...
Dean Markley Amplifier- Circuit Diagram
Posted by jerome sladen on Mon, 11/29/2010 - 01:20.
Require Circuit diagram for DEAN MARKLEY AMPLIFIER- MODEL NO. RM-80-DR.
Additional info.- Amplifier has 1 Tube, Output wattage unknown.
Please EMail to above address.
Where can I purchase both the tone and volume knobs for my Ovation? Both knobs have broken into small pieces. It's not that easy finding them even through the internet.
my battery holder inside my Legend is not attached to the body. How do I attach it? There is a screw through the body which appears to go into a plastic cover that is inserted into a rubber wheel-like piece on the back of the battery holder. But the screw doesn't grab anything and the the battery caddy doesn't stay in. Do I need a part? Are parts available? thanks!
The screw has fins check the battery holders female hole make sure that it has not been bent. If it has carefully reshape hole to jive. With this in mind
I think you can do it. Of course take off the strings first.
Posted by tony acamphora on Thu, 03/20/2008 - 12:33.
hi,i must neck reset a santa cruz guitar,but she have a different body neck joint than martin style,how could i detache it ,i usually steam thru 15 fret,but here isn'nt possible,thanks a lot tony
Hello,
The fingerboard on the 2nd and 3rd fret position of my acoustic guitar is worn away. I know it is costly, but I want it replaced. I want to keep all the M. of P. fret markers too. The guitar is a DY77 Alv Yairi. It is app. 30 years old. Will deliver world wide.Who's the best? The factory? Someone in Nashville, I live 120 mile north of there?
Im hoping to find a replacement wiring harness for my Samick guiter.heres the model# number if it make this easier.swt220sce.If you can let me know the price.
I bought an SHS SMX 3750 powered mixing amp that doesn't work. After pulling it apart, I noticed the main circuit board is fried. Can this be fixed or replaced by someone other than a technician? Wondering if I can buy a new board and solder the parts onto it. Have fixed these before, but don't know where to get this particular board. I did email SHS, so am waiting for a response there. But the board number says NO:368 Rev:1.1 3-power amp. Would take a lot of work resoldering all onto a stripped one, but has to be cheaper than complete if can get it.
Thanks,
Tim
Posted by Richard Hughes on Sun, 12/17/2006 - 21:22.
I AM LOOKING FOR A DOMINO CALIFORNIAN BASS, PREFERABLY IN PLAYABLE CONDITION. EMAIL ME. ALSO, I NEED BRIDGE PARTS AND WHAMMY BAR FOR MY 6 STRING CALIFORNIAN. PLEASE HELP!
Hello out there! I'm looking for a Lennon 325 copy (Series 10 or any copy brand) to purchase. It's getting harder to find a 325 copy than it is a real 325. Any body out there have one for sale or know of somewhere to order one? Blessings! Al.
I built a webpage a couple of years ago for the fun of it. Feel free to email me pictures of your dominos so I can add them to the webpage. The page is for fun, so nobody better sue me.
http://powerstump.tripod.com/vintagedominoguitars
I also may be able to answer some questions for you. Greg
Posted by Michael Rustin on Fri, 04/29/2011 - 23:22.
To whom this may concern,
I am in desperate need of a schematic/wiring diagram or detailed pictures of the inside of a domino californian guitar. Any help I could get would be TREMENDOUSLY appreciated. Thank you so much.
: I built a webpage a couple of years ago for the fun of it. Feel free to email me pictures of your dominos so I can add them to the webpage. The page is for fun, so nobody better sue me.
: http://powerstump.tripod.com/vintagedominoguitars
: I also may be able to answer some questions for you. Greg
In 1967 I purchased a Domino, 4 pick-up, w/tremalow arm, baby blue guitar. The neck was very similar to a fender. I have never seen one since, and can find no information about it. Can you help me?
Don
Hey, Greg. Just wondering how collectable Domino guitars are. I just ran across one in a pawn shop and didn't know anything about them, so I googled and found your page. Thanks, Trent.
: I built a webpage a couple of years ago for the fun of it. Feel free to email me pictures of your dominos so I can add them to the webpage. The page is for fun, so nobody better sue me.
: http://powerstump.tripod.com/vintagedominoguitars
: I also may be able to answer some questions for you. Greg
========================================
yo, Greg!!
I have an old Domino single cutaway hollowbody, one pickuop with a cool tailpiece, redburst over black. nice axe! How do I email a pic to you?
: I purchased a red Domino Dawson, but the insignia and tremolo arm are missing. Can anyone tell me were I may get these parts?
I have the Domino insignia if you are still interested
I found a whammy bar at a music store in Marquette, MI. It was new and fit perfectly.
recently travelled with it, since setting back up i dont get naything trhough the amp. It is the guita as i checked with other amps, checked the pickup, not sure what to do short of goign to repair shop. Any thoughts?
Any one have any info on the domino califorian guitar? mine friend has one and wants me to make it "playable" again, it used to belong to her father who recently passed away, it means alot to her, and i want to help
GREETINGS" I GOT MYSELF A TEX MEX STRAT A COUPLE OF YEARS AGO,AND TO MY SURPRISE TRIED TO INTONATE MY BRIDGE. NOTHING FANCY JUST THE OPEN 12TH OCTIVE.BUT AFTER TRYING TO SET THE INTONATION I LITTERALLY HAD TO BACK UP 2 OF MY SADDLED TO THE WALL. WELL FENDER SAY'S THAT THEIR TEMPLATES ARE WITHIN SPECS,,,SO MY QUESTION IS,,,WHAT CAN I DO SHORT OF REPLACING THE TREMOLO OR MAYBE HAVING IT BLOCKED. I REALLY DON'T USE IT AND SINCE I'VE HAD IT I'VE REALLY REGRETTED NOT HAVING A STOP TAIL PIECE. ANY IDEAS! THANKS ALL AND BEST REGARDS
: GREETINGS" I GOT MYSELF A TEX MEX STRAT A COUPLE OF YEARS AGO,AND TO MY SURPRISE TRIED TO INTONATE MY BRIDGE. NOTHING FANCY JUST THE OPEN 12TH OCTIVE.BUT AFTER TRYING TO SET THE INTONATION I LITTERALLY HAD TO BACK UP 2 OF MY SADDLED TO THE WALL. WELL FENDER SAY'S THAT THEIR TEMPLATES ARE WITHIN SPECS,,,SO MY QUESTION IS,,,WHAT CAN I DO SHORT OF REPLACING THE TREMOLO OR MAYBE HAVING IT BLOCKED. I REALLY DON'T USE IT AND SINCE I'VE HAD IT I'VE REALLY REGRETTED NOT HAVING A STOP TAIL PIECE. ANY IDEAS! THANKS ALL AND BEST REGARDS
You didn't specify what gauge strings you use. If there's a thinner gauge you're comfortable with, try them, that should give you a little room for adjustment. Also, don't press down too hard as you check the fretted note against the harmonic. You could make the fretted note too sharp.
Posted by Dimebag Darail on Wed, 03/16/2005 - 05:37.
theres something wrong with my epiphone les paul ... it was working fine and one day when i was playing this loud buzzing sound started coming from the amp.. i thought it was the amp at first but then i realized it was the guitar... someone plz tell me what to do..
My stepson brought home a broken series10. The neck is fubar split vertically in half. I want to get a replacemnt neck exactly like it.
However I cant find the manufacturer, anyplace that sells this type of electric guitar. I know its prolly like k-mart quality but I am eager to fix it to original. Help me out pros, where can i find info on it. there is no serial/model numbers on it anywhere that I can see. Also I refurbished a japanese copy of a fender that was stored in a ladys closet since 1970. Its acoustical/electric and it looks very vintage like, anyone who can give me an aprox value, I can email a picture or two of it. Lemme know....jonydeth
Posted by David Leaming on Tue, 01/04/2005 - 02:56.
I have a SADA YAIRI model 760, inside it sais, SADA LUTHIER.
Do you know the value of this guitar, and what it went for new,
all I know is it is from the 70s, and it is hand crafted
Thanks
Posted by JO MONROE (via moderator) on Fri, 11/19/2004 - 01:44.
RECENTLY A FRIEND GAVE ME AN IBANEZ AX. ITS THE SUPER STRAT TYPE BODY WITH THE 3 P/U CONFIGURATION , FLOYDE ROSE. IT SEEMS TO BE A VERY NICE AX & ALTHOUGH THE NECK IS VERY BADLY BOWED I DID PUT ON NEW STRINGS JUST TO HEAR THE SOUND OF THE P/U'S AND BODY. IT SOUNDS SO GOOD , I'M NOW DEDICATED TO FINDING A NECK FOR THIS BEAST. THE NECK HAD BEEN CRACKED AT THE HEAD STOCK NEAR THE NUT (COMMON?) & WHO EVER OWNED IT PUT EPOXXY & PLASTIC WOOD IN THE CRACK!!! NEEDLESS TO SAY THIS DID NOT REMEDY THE PROBLEM IF FACT IT ONLY COMPOUNDED IT. I WOULD LOVE TO FIND AN IBANEZ NECK BUT I WOULD SETTLE FOR A REPLACEMENT NECK THAT FITS THE GUITAR. I'M LOOKING FOR A MAPLE FRET BOARD & IT IS A 4 SCREW WITH THE OLD STANDARD METAL PLATE TYPE OF SET UP AS OPPOSED TO THE LOW PROFILE SCREWS WITHOUT ANY PLATE (NECK ATTACHMENT). I HOPE I'VE BEEN FAIRLY CLEAR WITH MY DESCRIPTION. I AM NOT TOO FAMILIAR WITH IBANEZ SINCE I NEVER OWNED ONE BUT THIS IS ONE NICE AX & I'M ANXIOUS TO GET IT TOGETHER & PLAYIN'.
I recently took the nectk off my 86 Squire Strat to check a serial number. Putting the neck back on i "bumped" it just above the part where the neck and the body meets, with the screws NOT in fully. This broke a small piece of the neck,if the neck was fully fastened the break which is surface (less about 5mm) could be sanded down. IS this a recommended procedure?
I'm sort of a newbie at the whole guitar thing. I'm more of a piano person and has always wanted to try my hand at the bass. I have a slight problem. My tone knob on the body of the bass is loose. Does anyone know if I should try to fix it myself (with advice, of course) or if I should get it fixed professionally? Please help.
Posted by Chris (via moderator) on Wed, 11/24/2004 - 05:43.
try takeing the knob off (just the know part, try pulling on it/ or look to see if theres a small hex screw to loosin the knob) the see if theres a nut, like a 6-sided nut, try tighting it with your fingers, the go to you back of guitar, or usnder your pickguard and hold the back of the intire knob unit, and tigten the same nut as before, there may also be a nut on the inside of the pickguard, in the back of the bass (under the litte plastic/metal protective door,) tighen that nut also. then put th e knob back on before putting the guard back and see it it's tight enough, if so replace the pickguard/back guard and bass it up
What can I do about the back of my Taylor 414ce? It is cracking in several places, the longest crack is about 6" long. The cracks haven't affected the sound..yet. I think they may be caused by the dry air. I'd appreaciate any advise on the care and repair of this instrument.
i just recently bought a gibson les paul for a very small amount of money indeed and then found out the model was discontinued in 2000. it comes from a limited series of sparkle guitars.
this is a link to it: http://www.gibson.com/products/gibson/LesPaul/Standardsp.html
it is the crimson one if you want me to be more specific.
I've just acquired a Domino California 12-string with 3 pick-ups from my grandfather. Problem: none of the electronics work. If anyone has the schematics, that would be great...and ANY help is appreciated. Thanks.
I have this guitar from my father. I know nothing about it. Can anyone tell me what year it is from and what they are worth so I can determin if a repair is worth it. It is a beautiful piece with nice in-lays.
try going to a good guitar shop I bought a domino single pickup hollow body,a dn Wurlitzer in Boston near Berklee gave me a lot of info about the guitar. If it's a nice guirat, spend the money & preserve it - having a nice sounding guitar is worth it.
Dean Markley Amplifier- Circuit Diagram
Require Circuit diagram for DEAN MARKLEY AMPLIFIER- MODEL NO. RM-80-DR.
Additional info.- Amplifier has 1 Tube, Output wattage unknown.
Please EMail to above address.
Ovation Knobs
Where can I purchase both the tone and volume knobs for my Ovation? Both knobs have broken into small pieces. It's not that easy finding them even through the internet.
volume and tone nobs for my 79 ovation can't find them
If you know where I can find these please tell me I have epoxy fever
epiphone triggerman 100 dsp
How do you remove the main fuse cover to replace the main fuse
ovation (1970's) inside battery repair
my battery holder inside my Legend is not attached to the body. How do I attach it? There is a screw through the body which appears to go into a plastic cover that is inserted into a rubber wheel-like piece on the back of the battery holder. But the screw doesn't grab anything and the the battery caddy doesn't stay in. Do I need a part? Are parts available? thanks!
battery holder
The screw has fins check the battery holders female hole make sure that it has not been bent. If it has carefully reshape hole to jive. With this in mind
I think you can do it. Of course take off the strings first.
santa cruz neck-reset
hi,i must neck reset a santa cruz guitar,but she have a different body neck joint than martin style,how could i detache it ,i usually steam thru 15 fret,but here isn'nt possible,thanks a lot tony
1920's supertone guitar wanna know pricing.
This popular thread has been given its own page : 1920's supertone guitar wanna know pricing.
Replacement neck for Domino
I'm looking for a replacement neck for a DOMINO DAWSON #40E2 Any ideas??????
Alv Yairi DY77 f-board
Hello,
The fingerboard on the 2nd and 3rd fret position of my acoustic guitar is worn away. I know it is costly, but I want it replaced. I want to keep all the M. of P. fret markers too. The guitar is a DY77 Alv Yairi. It is app. 30 years old. Will deliver world wide.Who's the best? The factory? Someone in Nashville, I live 120 mile north of there?
THanks,
Kev
replacement parts for a samick electric acoustic
Im hoping to find a replacement wiring harness for my Samick guiter.heres the model# number if it make this easier.swt220sce.If you can let me know the price.
Cesar Diaz 1984 CD-100 Blue Book Value
This popular thread has been given its own page : Cesar Diaz 1984 CD-100 Blue Book Value
SHS SMX 3750
I bought an SHS SMX 3750 powered mixing amp that doesn't work. After pulling it apart, I noticed the main circuit board is fried. Can this be fixed or replaced by someone other than a technician? Wondering if I can buy a new board and solder the parts onto it. Have fixed these before, but don't know where to get this particular board. I did email SHS, so am waiting for a response there. But the board number says NO:368 Rev:1.1 3-power amp. Would take a lot of work resoldering all onto a stripped one, but has to be cheaper than complete if can get it.
Thanks,
Tim
WANT TO PURCHASE DOMINO CALIFORNIAN BASS
I AM LOOKING FOR A DOMINO CALIFORNIAN BASS, PREFERABLY IN PLAYABLE CONDITION. EMAIL ME. ALSO, I NEED BRIDGE PARTS AND WHAMMY BAR FOR MY 6 STRING CALIFORNIAN. PLEASE HELP!
Series 10 Ric 325 copy:
Hello out there! I'm looking for a Lennon 325 copy (Series 10 or any copy brand) to purchase. It's getting harder to find a 325 copy than it is a real 325. Any body out there have one for sale or know of somewhere to order one? Blessings! Al.
jackson professional fusion std
This popular thread has been given its own page : jackson professional fusion std
Domino Guitar webpage
I built a webpage a couple of years ago for the fun of it. Feel free to email me pictures of your dominos so I can add them to the webpage. The page is for fun, so nobody better sue me.
http://powerstump.tripod.com/vintagedominoguitars
I also may be able to answer some questions for you. Greg
Re: Domino Guitar webpage
To whom this may concern,
I am in desperate need of a schematic/wiring diagram or detailed pictures of the inside of a domino californian guitar. Any help I could get would be TREMENDOUSLY appreciated. Thank you so much.
Re: Domino Guitar webpage
: I built a webpage a couple of years ago for the fun of it. Feel free to email me pictures of your dominos so I can add them to the webpage. The page is for fun, so nobody better sue me.
: http://powerstump.tripod.com/vintagedominoguitars
: I also may be able to answer some questions for you. Greg
In 1967 I purchased a Domino, 4 pick-up, w/tremalow arm, baby blue guitar. The neck was very similar to a fender. I have never seen one since, and can find no information about it. Can you help me?
Don
Re: Domino Guitar webpage
Hey, Greg. Just wondering how collectable Domino guitars are. I just ran across one in a pawn shop and didn't know anything about them, so I googled and found your page. Thanks, Trent.
Re: Domino Guitar webpage
where can i get parts for a domino beatle bass ???
thank you for your help
david mcknight
Re: Domino Guitar webpage
: I built a webpage a couple of years ago for the fun of it. Feel free to email me pictures of your dominos so I can add them to the webpage. The page is for fun, so nobody better sue me.
: http://powerstump.tripod.com/vintagedominoguitars
: I also may be able to answer some questions for you. Greg
========================================
yo, Greg!!
I have an old Domino single cutaway hollowbody, one pickuop with a cool tailpiece, redburst over black. nice axe! How do I email a pic to you?
Mark
markdiaz at juno dot com
Re: Domino Guitar webpage
This popular thread has been given its own page : Re: Domino Guitar webpage
Domino Dawson Parts
I purchased a red Domino Dawson, but the insignia and tremolo arm are missing. Can anyone tell me were I may get these parts?
Re: Domino Dawson Parts
: I purchased a red Domino Dawson, but the insignia and tremolo arm are missing. Can anyone tell me were I may get these parts?
I have the Domino insignia if you are still interested
I found a whammy bar at a music store in Marquette, MI. It was new and fit perfectly.
Squire Strat
recently travelled with it, since setting back up i dont get naything trhough the amp. It is the guita as i checked with other amps, checked the pickup, not sure what to do short of goign to repair shop. Any thoughts?
Domino Californian Info
Any one have any info on the domino califorian guitar? mine friend has one and wants me to make it "playable" again, it used to belong to her father who recently passed away, it means alot to her, and i want to help
Re: Domino Californian Info
I have one I recently got working, I can help you with info on wiring and such, but parts are hard to come by.
what do you need to know?
Rusty
guitar pickup noise
everytime i tap on my covered humbucker pickups, they make a "tap" sound.. is this normal? if not, hw can this be fixed?
FLOATING TREMOLO
GREETINGS" I GOT MYSELF A TEX MEX STRAT A COUPLE OF YEARS AGO,AND TO MY SURPRISE TRIED TO INTONATE MY BRIDGE. NOTHING FANCY JUST THE OPEN 12TH OCTIVE.BUT AFTER TRYING TO SET THE INTONATION I LITTERALLY HAD TO BACK UP 2 OF MY SADDLED TO THE WALL. WELL FENDER SAY'S THAT THEIR TEMPLATES ARE WITHIN SPECS,,,SO MY QUESTION IS,,,WHAT CAN I DO SHORT OF REPLACING THE TREMOLO OR MAYBE HAVING IT BLOCKED. I REALLY DON'T USE IT AND SINCE I'VE HAD IT I'VE REALLY REGRETTED NOT HAVING A STOP TAIL PIECE. ANY IDEAS! THANKS ALL AND BEST REGARDS
Re: FLOATING TREMOLO
: GREETINGS" I GOT MYSELF A TEX MEX STRAT A COUPLE OF YEARS AGO,AND TO MY SURPRISE TRIED TO INTONATE MY BRIDGE. NOTHING FANCY JUST THE OPEN 12TH OCTIVE.BUT AFTER TRYING TO SET THE INTONATION I LITTERALLY HAD TO BACK UP 2 OF MY SADDLED TO THE WALL. WELL FENDER SAY'S THAT THEIR TEMPLATES ARE WITHIN SPECS,,,SO MY QUESTION IS,,,WHAT CAN I DO SHORT OF REPLACING THE TREMOLO OR MAYBE HAVING IT BLOCKED. I REALLY DON'T USE IT AND SINCE I'VE HAD IT I'VE REALLY REGRETTED NOT HAVING A STOP TAIL PIECE. ANY IDEAS! THANKS ALL AND BEST REGARDS
You didn't specify what gauge strings you use. If there's a thinner gauge you're comfortable with, try them, that should give you a little room for adjustment. Also, don't press down too hard as you check the fretted note against the harmonic. You could make the fretted note too sharp.
epiphone les paul
theres something wrong with my epiphone les paul ... it was working fine and one day when i was playing this loud buzzing sound started coming from the amp.. i thought it was the amp at first but then i realized it was the guitar... someone plz tell me what to do..
Series10
My stepson brought home a broken series10. The neck is fubar split vertically in half. I want to get a replacemnt neck exactly like it.
However I cant find the manufacturer, anyplace that sells this type of electric guitar. I know its prolly like k-mart quality but I am eager to fix it to original. Help me out pros, where can i find info on it. there is no serial/model numbers on it anywhere that I can see. Also I refurbished a japanese copy of a fender that was stored in a ladys closet since 1970. Its acoustical/electric and it looks very vintage like, anyone who can give me an aprox value, I can email a picture or two of it. Lemme know....jonydeth
refinishing my accoustic guitar
I want to refinish the front of my accoustic guitar, will any type of varnish or shlack work, or will it hurt the sound? or what should I use?
Thanks
Re: refinishing my accoustic guitar
varnish works fine... just not the for metals type... no it won't affect the sound, just will make ya guitar body shinier...
domino guitar rainbos series model eg-11 acoustic
I purchased the above mentioned guitar today in a thrift shop and would like to learn something of it's age, history and value. Thanks!
SADA YAIRI, guitar value
I have a SADA YAIRI model 760, inside it sais, SADA LUTHIER.
Do you know the value of this guitar, and what it went for new,
all I know is it is from the 70s, and it is hand crafted
Thanks
seeking 24 fret ibanez neck
RECENTLY A FRIEND GAVE ME AN IBANEZ AX. ITS THE SUPER STRAT TYPE BODY WITH THE 3 P/U CONFIGURATION , FLOYDE ROSE. IT SEEMS TO BE A VERY NICE AX & ALTHOUGH THE NECK IS VERY BADLY BOWED I DID PUT ON NEW STRINGS JUST TO HEAR THE SOUND OF THE P/U'S AND BODY. IT SOUNDS SO GOOD , I'M NOW DEDICATED TO FINDING A NECK FOR THIS BEAST. THE NECK HAD BEEN CRACKED AT THE HEAD STOCK NEAR THE NUT (COMMON?) & WHO EVER OWNED IT PUT EPOXXY & PLASTIC WOOD IN THE CRACK!!! NEEDLESS TO SAY THIS DID NOT REMEDY THE PROBLEM IF FACT IT ONLY COMPOUNDED IT. I WOULD LOVE TO FIND AN IBANEZ NECK BUT I WOULD SETTLE FOR A REPLACEMENT NECK THAT FITS THE GUITAR. I'M LOOKING FOR A MAPLE FRET BOARD & IT IS A 4 SCREW WITH THE OLD STANDARD METAL PLATE TYPE OF SET UP AS OPPOSED TO THE LOW PROFILE SCREWS WITHOUT ANY PLATE (NECK ATTACHMENT). I HOPE I'VE BEEN FAIRLY CLEAR WITH MY DESCRIPTION. I AM NOT TOO FAMILIAR WITH IBANEZ SINCE I NEVER OWNED ONE BUT THIS IS ONE NICE AX & I'M ANXIOUS TO GET IT TOGETHER & PLAYIN'.
Squire Strat broken Neck
I recently took the nectk off my 86 Squire Strat to check a serial number. Putting the neck back on i "bumped" it just above the part where the neck and the body meets, with the screws NOT in fully. This broke a small piece of the neck,if the neck was fully fastened the break which is surface (less about 5mm) could be sanded down. IS this a recommended procedure?
Ovation Celebrity Deluxe - Neck Separated from Body...
This popular thread has been given its own page : Ovation Celebrity Deluxe - Neck Separated from Body...
Knob repair
I'm sort of a newbie at the whole guitar thing. I'm more of a piano person and has always wanted to try my hand at the bass. I have a slight problem. My tone knob on the body of the bass is loose. Does anyone know if I should try to fix it myself (with advice, of course) or if I should get it fixed professionally? Please help.
Re: Knob repair
try takeing the knob off (just the know part, try pulling on it/ or look to see if theres a small hex screw to loosin the knob) the see if theres a nut, like a 6-sided nut, try tighting it with your fingers, the go to you back of guitar, or usnder your pickguard and hold the back of the intire knob unit, and tigten the same nut as before, there may also be a nut on the inside of the pickguard, in the back of the bass (under the litte plastic/metal protective door,) tighen that nut also. then put th e knob back on before putting the guard back and see it it's tight enough, if so replace the pickguard/back guard and bass it up
Cracked Taylor
What can I do about the back of my Taylor 414ce? It is cracking in several places, the longest crack is about 6" long. The cracks haven't affected the sound..yet. I think they may be caused by the dry air. I'd appreaciate any advise on the care and repair of this instrument.
Jackson Fusion EX Guitar
I'm looking for electrical schematics
Re: Jackson Fusion EX Guitar
any one want to buy one?
just email me, white, black pickguard, original everything, floyd rose
discontinued gibson les paul
i just recently bought a gibson les paul for a very small amount of money indeed and then found out the model was discontinued in 2000. it comes from a limited series of sparkle guitars.
this is a link to it: http://www.gibson.com/products/gibson/LesPaul/Standardsp.html
it is the crimson one if you want me to be more specific.
what do you think its value is???
Domino schematics?
I've just acquired a Domino California 12-string with 3 pick-ups from my grandfather. Problem: none of the electronics work. If anyone has the schematics, that would be great...and ANY help is appreciated. Thanks.
Nut
Where can I find a replacement nut for my model 5021 Alvarez 12-string
Domino Mark XV
I have this guitar from my father. I know nothing about it. Can anyone tell me what year it is from and what they are worth so I can determin if a repair is worth it. It is a beautiful piece with nice in-lays.
Re: Domino Mark XV
try going to a good guitar shop I bought a domino single pickup hollow body,a dn Wurlitzer in Boston near Berklee gave me a lot of info about the guitar. If it's a nice guirat, spend the money & preserve it - having a nice sounding guitar is worth it.
Post new comment