The A.R.I. Engineering listing has been removed from the Guitar Database
Try searching :
The comment area has been left below for ongoing discussion of A.R.I. Engineering
Peavey studio pro 20 watt transformer
Posted by Daniel Price on Wed, 07/27/2011 - 19:48.
I need a transformer for a peavey studio pro 20 watt solid state amp. The transformer number is 705-18707 but that one is no longer availible. Peavey parts tells me that a705-17950 or a 705-18756 may work but they are not sure. Can anyone help with this. does anyone know the output voltage of the transformer
hi, im looking for an engraved lyre vibrola for my gibson sg. i have only been able to find ones on american websites, and i dont really like ordering stuff online from another country. have had bad experiences in the past. to much hassal. anyway, im not bothered about the price to much, just would like to find one. if anyone has any clues as to where i could get one in england, please let me know.
thanks you very much. Rees
Posted by richard booth on Sat, 04/09/2005 - 11:41.
recently had my tremolux serviced and discovered the internal tremolo unit has been removed!..That's why it didn't work!.....does any body know where i can find the bits to get it working again????
i need some help, a have a guitar fender mustang but i don´t know where´s the year that it was made it. my only reference is the number serial S821513. can you tell me where is? and thanks a lot for your time.. bye.
Posted by Gordon Gallagher on Wed, 04/23/2003 - 18:56.
Anyone got any recommendations for speakers for a 1968/69 Pro Reverb (the originals have been replaced with old Goodmans speaker)
Alnico? Ceramic? Jensen? what about Celestion Greenbacks?
Any advice would be greatly appreciated, cheers.
: Anyone got any recommendations for speakers for a 1968/69 Pro Reverb (the originals have been replaced with old Goodmans speaker)
: Alnico? Ceramic? Jensen? what about Celestion Greenbacks?
: Any advice would be greatly appreciated, cheers.
hi i think the original unit are a JBL E-120 with alnico magnet you can buy it but without alnico magnet actually JBL make it with ferrite magnet not the same but is very good.
cheers
: : Anyone got any recommendations for speakers for a 1968/69 Pro Reverb (the originals have been replaced with old Goodmans speaker)
: : Alnico? Ceramic? Jensen? what about Celestion Greenbacks?
: : Any advice would be greatly appreciated, cheers.
Superiorpromos.com : Promotional Products, Promotional items, Mugs, and Pens
Posted by Nicolas on Wed, 10/27/2004 - 05:48.
Superiorpromos.com is the ultimate supplier of promotional products and promotional items both on and off the web. Our great prices and low minimum order quantities make shopping for custom imprinted mugs, tote bags, custom magnets, and other great promotional materials a breeze.
Visit our site today for a revolutionary online shopping experience.
http://superiorpromos.com/
Posted by Patrick Garin on Tue, 10/05/2004 - 21:49.
Greenbacks do not have enough volume when using just one. If you had a 4X12 cab loaded with greenbacks it would be awesome. For one speaker I would get an alnico speaker if you can afford it. I've been searching for a speaker too and the advice I got was do not use one 12 inch celestion greenback.
: I am looking for a footswitch for a Peavey classic vtx amp. It has 4 switches on it and a din type plug for the amp. Any ideas?cause im a dork
: Thanks
Could anybody tell me where I could find a gibson head logo for a 59 flying V korina as the one I have is broken and I have lost part of it. I would be gratefull for any advise on this subject!. Many Thanks!
We are looking for a schematic for Fender lace sensor pickups (non-active pickups) for purchase, and Fender spaghetti-style Strat and Precison Bass headstock decals for sale. Rob Walsh 818 789-2954
Posted by roger alexander on Wed, 05/02/2001 - 02:16.
I am looking for a power board for a 1983 peavey roadmaster vintage tube series head the numbers on the board are 042383 98810030 please email me with any information you can
thanks,
Roger Alexander
Posted by red monkey electronics on Fri, 09/05/2003 - 18:18.
: I am looking for a power board for a 1983 peavey roadmaster vintage tube series head the numbers on the board are 042383 98810030 please email me with any information you can
: thanks,
: Roger Alexander
Posted by Adolfo lepanto on Mon, 07/08/2002 - 20:04.
: I am looking for a power board for a 1983 peavey roadmaster vintage tube series head the numbers on the board are 042383 98810030 please email me with any information you can
: thanks,
: Roger Alexander
: I need some hardware for 1969 Guild Starfire III. Any ideas?
: KM
I have a '69 Starfire III in excellent condition. D'Armond pickups and original hardshell case. Please email me if youareinterested in buying it (mattryes@aol.com)
I'm looking for some modifications for the Gallien-Krueger RB400III and RB1001. Does anyone know of any for these models and where I can get the mods do I can do them. Thanks
hi,
I have a 1968 Les Paul Custom.
Back in the 70's I was foolish enough to take the gold plated pickup covers off. ( like flared trousers it was fashionable...... yes I know now...) Even worse I GAVE them to someone !! (...insert Homer Simpson DOH !! of choice ).
I would now like to replace them, so if you know of anyone who has a pair of suitably worn covers which they are considering selling, I would be most interested in a purchase.
:I have a pair a pretty worn gold pick-up covers that i took off of a 90 les paul studio 490R 498t I'd sell them pretty cheap
: hi,
: I have a 1968 Les Paul Custom.
: Back in the 70's I was foolish enough to take the gold plated pickup covers off. ( like flared trousers it was fashionable...... yes I know now...) Even worse I GAVE them to someone !! (...insert Homer Simpson DOH !! of choice ).
: I would now like to replace them, so if you know of anyone who has a pair of suitably worn covers which they are considering selling, I would be most interested in a purchase.
Fender Mustang tremolo arm (Fender Deluxe Vibrato)
Posted by Ted on Fri, 01/05/2001 - 18:06.
Just thought everyone should be aware that back on November 25th, 2000, I ordered a couple Fender Mustang tremolo arms (Fender Deluxe Vibrato)for my Mustang from A.R.I. Engineering and they never arrived. Not only did they not arrive, but A.R.I. Engineering does not respond to my e-mails, nor does anyone pick up the phone when I try to call them. Does anyone have any experience in dealing with A.R.I. Engineering? Are they no longer in business?
Anyone know where I can find a Fender Mustang tremolo arm (Fender Deluxe Vibrato)?
Posted by Quentin Cooper on Wed, 05/25/2005 - 16:54.
Looking for two 1.5 henry chokes for Gibson 345 varitone circuit.
- Hell, I'm looking for one too (mono will do for me or is there two in there anyway?) any ideas on where I can get one? - Also has anybody got any access to some MODERN ways of wiring a 345 (independent volume controls so one pickup works even if the other is fully turned down), and so the pickups dont load each other inthe middle position. Ideas?
Hi,
I need a vibrato long tail lyre for SG, and i really need it. Do you know anybody who could sell one or indicates the dealers on the net (poor french, having a lot of pain trying to have the complete guitar. Many thanks)
Peavey studio pro 20 watt transformer
I need a transformer for a peavey studio pro 20 watt solid state amp. The transformer number is 705-18707 but that one is no longer availible. Peavey parts tells me that a705-17950 or a 705-18756 may work but they are not sure. Can anyone help with this. does anyone know the output voltage of the transformer
Engraved Lyre Vibrola for Gibson SG
hi, im looking for an engraved lyre vibrola for my gibson sg. i have only been able to find ones on american websites, and i dont really like ordering stuff online from another country. have had bad experiences in the past. to much hassal. anyway, im not bothered about the price to much, just would like to find one. if anyone has any clues as to where i could get one in england, please let me know.
thanks you very much. Rees
WOULD LIKE TO RECIEVE MAIL ORDER CATALOG
WOULD LIKE A CATALOG PLEASE. THANKS DON
scratchplate
Hi I`m looking for a scratchplate for a `64 Gibson ES120T.
Can anyone help please?
Thanks,
Terry
Gretsch Rogue amp 1970s
Does any one know of a website that can give me the specs on this amp? Would appreciate any help
Re: Gretsch Rogue amp 1970s
http://www.gretschpages.com/amps/7517rogue/
Here is the link...Just bought one today...will be happy to swap tips, etc as things move along...regards
: Does any one know of a website that can give me the specs on this amp? Would appreciate any help
vintage fender tremolux 1965
recently had my tremolux serviced and discovered the internal tremolo unit has been removed!..That's why it didn't work!.....does any body know where i can find the bits to get it working again????
circuit of gibson ES345
I need the circuit for the gibson ES345 Where can I find it?
lyre vibrola tailpiece
:hey i'm looking for a lyre vibrola tailpiece. i need one for my Silvertone ssg. if you have one please contact me for a reasonabe price
Broken Phaser
i have a broken ibanez PH7 phase shifter and i need it fixed, but i dont know where to go, i live in ny, can someone help me out?
reverb tank
hi i need a reverb tank for a peavey amp 4eb2c1a could someone tell me the best place to look for one thanks mark
Vintage Dearmond Pickups
This popular thread has been given its own page : Vintage Dearmond Pickups
faceplate for pro reverb
I'm looking for a Blackface faceplate for a 68 pro reverb origional or after market.Thanks for any help you guys can offer. James
Quetion
i need some help, a have a guitar fender mustang but i don´t know where´s the year that it was made it. my only reference is the number serial S821513. can you tell me where is? and thanks a lot for your time.. bye.
Speakers for Vintage Fender Pro Reverb?
Anyone got any recommendations for speakers for a 1968/69 Pro Reverb (the originals have been replaced with old Goodmans speaker)
Alnico? Ceramic? Jensen? what about Celestion Greenbacks?
Any advice would be greatly appreciated, cheers.
Re: Speakers for Vintage Fender Pro Reverb?
: Anyone got any recommendations for speakers for a 1968/69 Pro Reverb (the originals have been replaced with old Goodmans speaker)
: Alnico? Ceramic? Jensen? what about Celestion Greenbacks?
: Any advice would be greatly appreciated, cheers.
Re: Speakers for Vintage Fender Pro Reverb?
hi i think the original unit are a JBL E-120 with alnico magnet you can buy it but without alnico magnet actually JBL make it with ferrite magnet not the same but is very good.
cheers
: : Anyone got any recommendations for speakers for a 1968/69 Pro Reverb (the originals have been replaced with old Goodmans speaker)
: : Alnico? Ceramic? Jensen? what about Celestion Greenbacks?
: : Any advice would be greatly appreciated, cheers.
Superiorpromos.com : Promotional Products, Promotional items, Mugs, and Pens
Superiorpromos.com is the ultimate supplier of promotional products and promotional items both on and off the web. Our great prices and low minimum order quantities make shopping for custom imprinted mugs, tote bags, custom magnets, and other great promotional materials a breeze.
Visit our site today for a revolutionary online shopping experience.
http://superiorpromos.com/
Re: Speakers for Vintage Fender Pro Reverb?
Greenbacks do not have enough volume when using just one. If you had a 4X12 cab loaded with greenbacks it would be awesome. For one speaker I would get an alnico speaker if you can afford it. I've been searching for a speaker too and the advice I got was do not use one 12 inch celestion greenback.
catalog
i would like to receive one of your parts catalogs
dearmond,pickup parts
looking for parts for U.S.A. made harmonys,specificly,pickup adjusters for de armond pickups.
Re: dearmond,pickup parts
I have a DeArmond mandolin pick up I need parts for. can anyone Help me?
DeArmond m65-c model
looking for switch knob on the three way switch control.
maestro vibrola lyre long tail for SG. Thanks
This popular thread has been given its own page : maestro vibrola lyre long tail for SG. Thanks
gibson sg machine head
Do you have a single right vintage machine head for a gibson sg special? The machine head is nickel and pearloid.
classic vtx footswitch
I am looking for a footswitch for a Peavey classic vtx amp. It has 4 switches on it and a din type plug for the amp. Any ideas?
Thanks
Re: classic vtx footswitch
: I am looking for a footswitch for a Peavey classic vtx amp. It has 4 switches on it and a din type plug for the amp. Any ideas?cause im a dork
: Thanks
Gibson Flying V pickups needed
Bought a Gibson epophone Flying V I need pickups for it
Gibson 59 flying V korina
Could anybody tell me where I could find a gibson head logo for a 59 flying V korina as the one I have is broken and I have lost part of it. I would be gratefull for any advise on this subject!. Many Thanks!
want to purchase
We are looking for a schematic for Fender lace sensor pickups (non-active pickups) for purchase, and Fender spaghetti-style Strat and Precison Bass headstock decals for sale. Rob Walsh 818 789-2954
peavey amp parts
I am looking for a power board for a 1983 peavey roadmaster vintage tube series head the numbers on the board are 042383 98810030 please email me with any information you can
thanks,
Roger Alexander
Re: peavey amp parts
I am looking for a power transformer for a BANDIT 118 amplifier part number 705-18756.
Thanks!
Nelson Fredritz
Re: peavey amp parts
I have one if you're still looking. 856-308-2432
: I am looking for a power transformer for a BANDIT 118 amplifier part number 705-18756.
: Thanks!
: Nelson Fredritz
Re: PEAVEY 112 AMP REVERB CHOKES R & L
: I am looking for a power board for a 1983 peavey roadmaster vintage tube series head the numbers on the board are 042383 98810030 please email me with any information you can
: thanks,
: Roger Alexander
Re: peavey amp parts/driver board for pv2000(1.3k)
: I am looking for a driver board for peavey 2000 (1.3k)please e-mail me any information.
: thanks,
: courtney williams
Re: peavey amp parts/driver board for pv2000(1.3k)
Yo! fun...
i like it :)
John
<a href="http://www.toshain.com">painting</a>
Re: peavey amp parts70413080 ic
: I am looking for a power board for a 1983 peavey roadmaster vintage tube series head the numbers on the board are 042383 98810030 please email me with any information you can
: thanks,
: Roger Alexander
Hardware for 1969 Guild Starfire III
I need some hardware for 1969 Guild Starfire III. Any ideas?
KM
Re: Hardware for 1969 Guild Starfire III
: I need some hardware for 1969 Guild Starfire III. Any ideas?
: KM
I have a '69 Starfire III in excellent condition. D'Armond pickups and original hardshell case. Please email me if youareinterested in buying it (mattryes@aol.com)
Bass amp mods
I'm looking for some modifications for the Gallien-Krueger RB400III and RB1001. Does anyone know of any for these models and where I can get the mods do I can do them. Thanks
Tiffany
gibson humbucking pickup covers.
hi,
I have a 1968 Les Paul Custom.
Back in the 70's I was foolish enough to take the gold plated pickup covers off. ( like flared trousers it was fashionable...... yes I know now...) Even worse I GAVE them to someone !! (...insert Homer Simpson DOH !! of choice ).
I would now like to replace them, so if you know of anyone who has a pair of suitably worn covers which they are considering selling, I would be most interested in a purchase.
cheers
Re: gibson humbucking pickup covers.
:I have a pair a pretty worn gold pick-up covers that i took off of a 90 les paul studio 490R 498t I'd sell them pretty cheap
: hi,
: I have a 1968 Les Paul Custom.
: Back in the 70's I was foolish enough to take the gold plated pickup covers off. ( like flared trousers it was fashionable...... yes I know now...) Even worse I GAVE them to someone !! (...insert Homer Simpson DOH !! of choice ).
: I would now like to replace them, so if you know of anyone who has a pair of suitably worn covers which they are considering selling, I would be most interested in a purchase.
: cheers
Fender Mustang tremolo arm (Fender Deluxe Vibrato)
Just thought everyone should be aware that back on November 25th, 2000, I ordered a couple Fender Mustang tremolo arms (Fender Deluxe Vibrato)for my Mustang from A.R.I. Engineering and they never arrived. Not only did they not arrive, but A.R.I. Engineering does not respond to my e-mails, nor does anyone pick up the phone when I try to call them. Does anyone have any experience in dealing with A.R.I. Engineering? Are they no longer in business?
Anyone know where I can find a Fender Mustang tremolo arm (Fender Deluxe Vibrato)?
Thanks,
Ted
gibson ES345 guitar part wanted.
looking for two 1.5 henry chokes for Gibson 345 varitone circuit.
Re: gibson ES345 guitar part wanted.
Looking for two 1.5 henry chokes for Gibson 345 varitone circuit.
- Hell, I'm looking for one too (mono will do for me or is there two in there anyway?) any ideas on where I can get one? - Also has anybody got any access to some MODERN ways of wiring a 345 (independent volume controls so one pickup works even if the other is fully turned down), and so the pickups dont load each other inthe middle position. Ideas?
Re: gibson ES345 guitar part wanted.
Hi Ivan,
I have an es345 I bought in 1977. I need to fix
it myself for I'm also in electronics. I don't
trust the repairers around here!
That 2 metal things under the rear pick-up are coils? I measured it in the ohm's range & they have resistance.
Please email me the circuit if you have it. Gibson
Co. seems of no help.
thanks,
efren
gibson spares
I need a replacement machine head for a Gibson L6. Do you have any?
Re: gibson spares
I need a tail piece for an SG - top 'E' must be already filed.
Please help me! I can't find one ready filed anywahere - will pay over the odds for the hassle for such a small piece
Re: gibson spares
hi i'm looking for a tailpiece for a super 400 any chance?
thanks robert
Re: gibson spares vibrato long tail lyre for SG
Hi,
I need a vibrato long tail lyre for SG, and i really need it. Do you know anybody who could sell one or indicates the dealers on the net (poor french, having a lot of pain trying to have the complete guitar. Many thanks)
Post new comment