Proudly Sponsored by...

GuitarSite.com Discussion Forum

In Reply to: LSR Roller Nut posted by Glen on June 03, 2001 at 18:10:56:

: Getting tired of strings sticking in my stock nut.
: So I got a LRS Roller Nut.
: I'm pretty good with tools.
: Going to do it myself.
: Any tips, or what not to do.
: Thanks Again.. Glen

Be very careful and measure the length from nut to saddle exactly, you will need to remove a consderable amount of wood from the fretboard and if you put the nut in the wrong place you can screw the intonation for good. Measure, mark, then cut carefully and exactly.

Follow Ups:

• injury 21:07:39 12/08/04 (0)
• newsletter 21:07:38 12/08/04 (0)
• processing 21:07:38 12/08/04 (0)
• bontril 21:07:37 12/08/04 (0)
• valtrex 21:07:37 12/08/04 (0)
• sonata 21:07:36 12/08/04 (0)
• levitra 21:07:34 12/08/04 (0)
• soma 21:07:34 12/08/04 (0)
• ultram 21:07:32 12/08/04 (0)
• meridia 21:07:32 12/08/04 (0)

Post a Followup