Proudly Sponsored by...

GuitarSite.com
Discussion
Forum

Re: Fender Telesonic

[ Follow Ups ] [ Post Followup ] [ Guitarist Discussion Forum ]

Posted by Rex Slye (from: ) on December 26, 2002 at 20:21:26:

In Reply to: Re: Fender Telesonic posted by chris dansdill on May 02, 2002 at 13:07:55:

I HAVE A 98 TELESONIC ALSO WITH THE "CRAPPY" TAILPIECE. DO YOU REMEMBER WHAT THE PART NUMBER WAS AT STU-MAC. I FOUND ONE THAT LOOKS RIGHT AND WAS PART #0198. I JUST DON'T KNOW IF THE POSTS ARE THE RIGHT SIZE OR CORRECT THREADS. ALL OTHER SPEC'S LOOKED OKAY. IE: 3 1/4" POST SPACING AND 2 3/32 STRING SPACING. THANKS

: I have a 98 model, and first thing I did was get a
: decent bridge to replace the wilkinson crappy one.
: Schaller makes a nice heavy brass chrome plated one
: piece you can find at Stu Mac or all parts. Then
: I wisely took the bridge and the guitar to my favorite
: luthier for installation and setup. The height setting
: will not accomplish a lower action unless the truss rod is properly adjuste, and the neck tilt is appropriate. Good luck.

Follow Ups:

Post a Followup

Name:
E-Mail:

Subject:

Comments:
: I HAVE A 98 TELESONIC ALSO WITH THE "CRAPPY" TAILPIECE. DO YOU REMEMBER WHAT THE PART NUMBER WAS AT STU-MAC. I FOUND ONE THAT LOOKS RIGHT AND WAS PART #0198. I JUST DON'T KNOW IF THE POSTS ARE THE RIGHT SIZE OR CORRECT THREADS. ALL OTHER SPEC'S LOOKED OKAY. IE: 3 1/4" POST SPACING AND 2 3/32 STRING SPACING. THANKS : : I have a 98 model, and first thing I did was get a : : decent bridge to replace the wilkinson crappy one. : : Schaller makes a nice heavy brass chrome plated one : : piece you can find at Stu Mac or all parts. Then : : I wisely took the bridge and the guitar to my favorite : : luthier for installation and setup. The height setting : : will not accomplish a lower action unless the truss rod is properly adjuste, and the neck tilt is appropriate. Good luck.

[ Follow Ups ] [ Post Followup ] [ Guitarist Discussion Forum ]