|
GuitarSite.com Discussion Forum |
||||||||
In Reply to: Re: Putting on a clear pickguard---advice? posted by steve on June 28, 2001 at 20:46:03:
: Does the pickguard have stickum on it already? If it's pre-gummed, just make sure you put it on where you want it, 'cause once it's on, it's pretty much on. It's just like putting on a bumper sticker, start at one side and go to the other.
: If you have to use your own glue, then I don't know...
:
: : I'm installing a clear pickguard on my Rainsong all Graphite acoustic guitar, not supposed to use a heat gun, anyone have advice on applying these so you don't get any bubbles staying underneath. No instructions came with the sheet of Mylar.
: : Thanks Brad
Try using an alternative pickguard from DS Custom Shop. Just lay it on and remove it when you are not playing. No goof ups because there is no adhesive and they can be removed and replaced hundreds of times. Only $10.00 for a pair in teardrop or Taylor style contour. Web site is www.dscustom.com - Shipping is free and lightning FAST.
Dave
![]() |