Homepage › Forums › Guitar Discussion › Guitar › bedrock 1000 series head -> two cabinets possible ?
- This topic has 13 replies, 3 voices, and was last updated 18 years, 11 months ago by lee_UK.
-
CreatorTopic
-
April 13, 2005 at 8:43 am #21736trasherParticipant
hi guys,
i have a problem with my bedrock head.its a 1000 series head 100 W and i got a 4 ohm and a 8 ohm outputjack for the cabinets.
there´s “minimum total impedance must be 4 ohm !” written under hte jacks.now the problem, what if i wanna use a fullstack ?
i don´t knom how to put in the cables, and i´m a little confused if it´s even possible zo us two cabintes with this head ?
maybe someone can help me ?
sorry for my english, but i´m german, and school is a long time over 😀 ! -
CreatorTopic
-
AuthorReplies
-
-
May 8, 2005 at 8:02 pm #66344lee_UKParticipant
Sounds good to me, good luck with it Trasher, im sure you have your calculations right, nothing wrong with a double check, as Harry Greene (QVC D.I.Y Expert) says, ‘Measure Twice, Cut Once’ 😯 and also that all time classic line, ‘Safety first, D.I.Y second’ 😆 .
Ahh, sunday mornings and QVC, nothing can beat it. 😆
-
May 8, 2005 at 6:53 pm #66338trasherParticipant
it was my mistake. i connected 8 and 16 ohm cab. i´d mail to bedrock if i could, but the company went out of business a few year ago. that´s why i´m searching like an idiot for a manual for my amp. i read one of another bedrockampseries, the 1600, and there´s the same, two jacks and minimum impedance 4 ohm, and in the manual they have written, that you can combine any cabs as long as the impedance does not drop below 4 ohms.
so we´ll see !! i´ll let you know if i blow my amp !! 😀 -
May 8, 2005 at 7:02 am #66371lee_UKParticipant
SS amps are pretty robust, but im not sure your techie guy has given you the right info there, if it were me, id mail Bedrock to double check that advice, better to be safe than sorry as 👿 Evil Kenevel 👿 eventauly said.
-
May 7, 2005 at 9:01 am #663481bassleftParticipant
I’m not sure about SS amps in general, and I know nothing about the Bedrock. Just thought I’d mention that a 4ohm cab with a 8ohm cab in parallel = 2.6ohm total impedance.
If you have the cabs connected to the amp’s different output jacks and it works, then that’s great. To be absolutely honest, I don’t know enough to disagree with your tech. I only hoped to point out possible disasters before plugging in. Glad you’re sorted,
1BL -
May 6, 2005 at 8:11 pm #66342trasherParticipant
i took it to a tech, he checked it and said that to me. i tested it and it works. i also combined an 8 ohm cab and my 4 ohm cab and it works without problems.
-
May 6, 2005 at 7:42 am #663621bassleftParticipant
Trasher, first of all, try a good search engine. Copernic is a favourite of mine – a free download. You will find Bedrock amp hits such as a Bedrock forum on Bravenet.com
Secondly, I echo Lee’s caution. Do you mean that your amp’s output jacks are wired in parallel? They certainly will be. If they were wired in series, then you’d have no volume out unless they were all connected. I suggest that you daisy-chain your cabs, then connect cab #1 to the most appropriate output jack on your amp.
It may be boring, but please read my dull thread on “impedance theory” posted on this forum. Also, check the link to David Zsabados’ website contained within. Some of this reading can save you from an expensive mistake.
-
May 5, 2005 at 7:32 am #66361lee_UKParticipant
Trasher, just make sure you are 100% before you start, it could be an expensive mod. Double check your info.
-
May 4, 2005 at 2:44 pm #66363trasherParticipant
thanks, i solved the problem, the two jacks are wired parallel, so i can use 4 ohm, 2 x 8 ohm, or 2 x 16 ohm, cause the amp needs 4 ohm minimum impedance. the amp didn´t care about the rest, as long as the impedance dos not drop below 4 ohm.
btw, does anyone of you have the manual for the bedrock 1000 series ? can´t find one here in germany, or even in the web ! -
April 20, 2005 at 7:24 am #663701bassleftParticipant
Trasher, just in case your ‘notify me’ is switched on, I did a new topic called “some impedance theory”, as others have put similar Qs. There has since been another thread on the subj from Riz you may want to read.
I hope something posted here is useful.
-
April 15, 2005 at 10:25 pm #66332lee_UKParticipant
[quote=”1bassleft”] On a long cable, this will affect the impedance the amp “sees” and there may be a mismatch.[/quote]
Good call on that one bass, i forgot about about the extra impedence the long copper cable makes.
-
April 15, 2005 at 1:57 pm #66358trasherParticipant
thanx boys, but ho do i connect two cabs ?
i have a jcm slash cab 4×12″, and it has a 4 ohm and a 16 ohm input for mono and you can switch them to 8 ohm stereo, so how can i connect this cab with for example the same type of cab ? -
April 15, 2005 at 7:37 am #663571bassleftParticipant
Trasher, no need to apologize for the English. Faultless, certainly better than my German.
Lee is, as often, right. Chain two 16ohm cabs together and connect this to the 8ohm output. Or, chain two 8ohm cabs and connect to the 4ohm output.
Lee makes the excellent point that speaker cable is not the same as instrument to amp cable. I’ve never mentioned this before. Apart from the point Lee makes, an instrument cable is shielded. On a long cable, this will affect the impedance the amp “sees” and there may be a mismatch. Quality amp to speaker cable will be unshielded and have heavier duty ‘hot’ wire to carry the amplified signal. Keep it as short as you can live with. If the head is on top of the stack, 6m is a waste and has bad effects. 1m is preferable.
-
April 14, 2005 at 6:29 am #66191lee_UKParticipant
You need to get 2 stacks of the same total impedance, if you already have a 4×12 cab and its rated at 16ohms then you need another of that impedance link the together in paralell (cab1 output jack – to cab 2 input jack ) then take a cable from the input jack of cab 1 to the 8 ohm output jack of your amp.
if however you have a 4×12 rated at 8ohms, then you need another 4×12 of the same rating, link them in the same order as above but connect the input jack of cab 1 to the 4ohm output jack of your amp.
Apeice of advice, a lot of people use patch leads and guitar leads to link their cabs to the output jacks of their cabs, when in fact you need good quality speaker cable, like you use for your speakers at home, a good multistranded
OFC copper cable would be good to use, the inner core of a lot of guitar cable is a thin strand of copper and isnt up to the job, sound quality and reliabilty is greatly improved, would you risk a speaker cable breakdown in the middle of a set? and if you are running a nice expensive valve amp think of the damage that could cause.
-
-
AuthorReplies
- You must be logged in to reply to this topic.