|
|
| Author |
Message |
FretSpider22
Joined: 13 Jun 2008
Posts: 6
Location: Chicopee,Mass 01020
|
 Posted: Wed Jun 18, 2008 9:17 am Post subject: Jackson JS1 Wiring Diagram With Fender Switch |
 |
|
Im about to do the wiring in my Jackson Js1. New volume and tone pots, I ordered a new 3 way blade style switch but its a little different. The contacts to solder to are on the side. On the old switch the contacts are in a row on the bottom of the switch and was hoping someone could help me out wiring this up with this switch.
In this picture, The switch on the right is the new one. you can see the old switch on the left has the contacts to solder to on the BOTTOM of the switch, and on the new switch u can see the contacts on the side. 3 on each side and 1 in the middle so i need to know how to wire this into a Jackson Js1 with 2 humbuckers,1 volume,1 tone and the 3 way blade switch.
Please help me! this is my only hold up.
 |
|
| Back to top |
|
 |
1bassleft
Lowdown Cack-hander
Joined: 16 Feb 2005
Posts: 3828
Location: "Hit The North"
|
| Posted: Wed Jun 18, 2008 11:21 pm Post subject: |
|
|
| Sorry for such a quick reply, but it's late here. Have a look at the excellent www.guitarelectronics.com site for all manner of wiring diagrams. If that doesn't help you, please call back in and I'll try to help a bit more. |
|
| Back to top |
|
|
FretSpider22
Joined: 13 Jun 2008
Posts: 6
Location: Chicopee,Mass 01020
|
| Posted: Wed Jun 18, 2008 11:49 pm Post subject: |
|
|
I looked, but didnt see the diagram with the switch i have. 2 HB,1 vol,1 Tone,3 way switch. look at the picture
The new switch is on the right and u can see the contacts clearly. and on the left switch the contacts to solder to are on the bottom. So i need a JS1 wiring diagram but figure out how to use the switch i got. |
|
| Back to top |
|
|
|
