Carvin introduces California Single Guitar

Carvin has introduced the new California Single Carved Top. Its equipped the same as the CT6, with a 22-fret, 25” scale mahogany set-neck, mahogany body, standard AAAA flamed maple top with deep triple-step finish and abalone dot inlays on ebony. Carvin's C22 pickups are standard, but our all-new S22 covered humbuckers also make their debut with the CS6. The S22 pickups are warmer, and can be ordered with gold or chrome covers, to further accentuate the look and sound of your CS6.

The CS6 guitar features a premium Mahogany body and neck. The Curly Flamed Maple top (Quilted Maple optional) is hand selected and bookmatched by seasoned luthiers in Carvin's California Custom Shop. Carvin's Rapid Play Neck has been designed with unique set-in construction. Where most set-in neck guitars have a cumbersome heel and don't set into the body any further than the fingerboard, the CS6 guitar has an exclusive smooth “heel-less” design for improved access to all frets. The neck actually sets 5 inches into the body and extends underneath the neck pickup for greater stability and sustain over any other single-cut set-in neck guitar. As with many other Carvin models, players can enjoy 4 different bridge selections from Tune-O-Matic to Floyd Rose. To top it off, the California Single is equipped with a pair of our tone enhancing Classic Humbuckers. You can also order our S22 chrome, gold or black covered pickups to match your hardware.

Specifications:

– Construction: Set neck

– Scale length: 25″

– Body: Mahogany with 20mm highest quality flamed maple top

– Neck: Mahogany, flamed maple headstock overlay w/ gold logo

– Fingerboard: Ebony, 12″ radius

– Inlays: Abalone dots

– Neck width: 1.69″ wide @ nut, 2.23″ wide @ 22nd fret

– Hardware: Chrome

– Bridge: M bridge – tune-o-matic bridge set in body with strings fed through

– Tuners: Sperzel locking tuners

– Frets: 22 medium-jumbo, .103 wide X .048 tall

– Pickups: C22J & C22B humbuckers

– Electronics: Master volume, push/pull tone/coil splitter, 3-way pickup – selector

– Dimensions: 38.5″ long, 12.8″ wide body, 2.2″ thick at center of body, 1.62″ thick at edge

– Weight: 8.5 lbs

Related News: