Hi Folks,
I'm doing some research for a guitar accessory design I'm busy with and I'd really, really appreciate some help. Guitars come in all shapes and sizes so if you have a guitar I'd like to know it's measurements!! Haa Haa!!
No seriously, I'm looking for the measurement in millimetres of the Thickness of the guitar head (both mine are 15mm) and the distance between the Machine Heads (not the tuning pegs), if any. If there is no space between, how deep is the machine head casing?
If you have a nylon guitar on top of the above measurements I'd like to know the distances from the edge of the guitar head to the open section, the open section and the middle section.
This will help me out big time because for some reason Music Shops don't take kindly to a person attacking their Guitar stock with a tape-measure!!! Go Figure!!
Many, many thanks in advance to anyone that takes the time to help me.
Cheers Mel
Research help wanted. You'll need a ruler!
Hi Folks,
I'm doing some research for a guitar accessory design I'm busy with and I'd really, really appreciate some help. Guitars come in all shapes and sizes so if you have a guitar I'd like to know it's measurements!! Haa Haa!!
No seriously, I'm looking for the measurement in millimetres of the Thickness of the guitar head (both mine are 15mm) and the distance between the Machine Heads (not the tuning pegs), if any. If there is no space between, how deep is the machine head casing?
If you have a nylon guitar on top of the above measurements I'd like to know the distances from the edge of the guitar head to the open section, the open section and the middle section.
This will help me out big time because for some reason Music Shops don't take kindly to a person attacking their Guitar stock with a tape-measure!!! Go Figure!!
Many, many thanks in advance to anyone that takes the time to help me.
Cheers Mel
--
<a href="http://www.mp3.com/MelBingham">www.mp3.com/MelBingham</a>