– Press Release

Hartke has taken its experience in building great sounding bass amplifiers and brought it to the field of acoustic guitar amplification with the introduction of the Hartke Acoustic Ribbon Series.

New is the AC150, a two channel 150 watt acoustic guitar combo and the AC75, a two channel 75 watt combo.

The AC150 features a 150 watt tri-amped design, with 50 watts powering the left and right full range speakers and 50 watts powering the high frequency ribbon tweeter. To reduce feedback, there is a phase switch on channel 1 as well as a variable notch filter with depth control. On the rear panel of the amplifier there is an effects loop with stereo return, and stereo XLR direct outputs.

https://www.guitarsite.com/newsletters/gnw/images/other/hartkeAC150.jpg

Feature overview:

– 150 Watt Acoustic Guitar Combo
– Four 5″ Woofers and a 2″ x 4″ Ribbon High Frequency Transducer
– 5-Band Graphic EQ
– Phase Switch and Variable Notch Filter Feedback Control
– 100 24-Bit Built-In Stereo Digital Effects
– Effects Loop with Stereo Return and Stereo Direct Output
– Precision tuned Kickbackâ„¢ Enclosure

The AC75 features a 75 watt bi-amped design, with 50 watts powering the full range speakers and 25 watts powering the high frequency ribbon tweeter. To reduce feedback, there is a phase switch on channel 1 as well as a variable notch filter with depth control. On the rear panel of the amplifier there is an effects loop, and XLR direct outputs.

Feature overview:

– 75 Watt Acoustic Guitar Combo
– Two 5″ Woofers and a 2″ x 4″ Ribbon High Frequency Transducer
– 5-Band Graphic EQ
– Phase Switch and Variable Notch Filter Feedback Control
– 100 24-Bit Built-In Digital Effects
– Effects loop and direct output
– Precision tuned Kickbackâ„¢ Enclosure

Find out more at http://www.samsontech.com

Related News:
Fishman Loudbox Performer Amplifier