New guitar hanging solution released

GVPro Production has a new guitar hanger that you can hang and display your instrument on the wall at an angle. The HANG'em HIGH guitar hanger is a patent pending design made of a two-piece system that is mounted on the wall so you can proudly display and hang your guitar or bass on your wall at an ANGLE. The angle can be adjusted from 15 to 90 degrees.

It is designed for both right or left handed electric and acoustic guitars and basses with bodies from 1 to 6 inches thick, with or without headstocks. Works great for Fender Strats, Gibson Les Pauls, Jackson Kellys, Jackson RR V's, BC Rich Warlocks, Parker Fly's, Steinberger's etc.

The instrument sets on Durable Black Foam Rubber Grips that fully cover steel hanger brackets to protect the instrument from scratches. The hanger creates the least amount of stress on the guitar neck than any other guitar wall hanger because the weight is off of the guitar headstock and is placed on the guitar body and mid neck, the same as when you are holding and playing the instrument. You can safely hang and display your guitar without any long term damage and warping to the guitar neck and headstock.



You can remove and hang your instrument very easily within seconds with this hanger just as simple as picking it up and setting it down, unlike other angled wall hangers where you have to remove your guitar strap to hang your guitar. With the Hang’em High guitar hanger you can leave the guitar strap on your instrument, ready to pick up and play.

The hangers are constructed with Strong Red Oak wood bases with counter sunk holes for the mounting screws and come in three finishes, Black, Classic Oak and Natural Oak. The steel hanger brackets are fully covered with Durable Black Foam Rubber Grips. The hangers come with mounting hardware that gives the instrument the security it needs with 2 anchor points for each base rated at 50 lbs each to ensure the hanger and instrument will stay up on the wall. This is especially important considering you're hanging something very valuable on it. Each Hanger is backed by a 30-Day Satisfaction guarantee and a lifetime warranty.

For more information,please visit www.hangemhigh.net

Related News:

Grundorf GMT-004 Guitar Maintenance Table

3 thoughts on “New guitar hanging solution released”

    1. Toggle Bolts Work Great!
      Anonymous

      You are better off to use a toggle bolt on drywall. Plastic anchors pull out eventually. Match the toggle bolt size to the hole size in the wood. Need to measure but generally a 3 inch one works fine.

  1. Re: GVPro Production has a new guitar hanger that you can... New guitar hanging solution released
    A Kirk

    Great idea but fixings could be iffy. What if you are fixing to a plaster board wall?

    Your brackets will not all line up with studding behind the wall meaning you will have to fix into the plasterboard ..NOT A GOOD IDEA..

    These hangers can only really be fitted to a solid wall were a good fixing can be obtained on every bracket.

Leave a Reply