Complete Guitar Repairs * Speciality & Hard To Find Parts * Pick-Ups Installed and Sold
– Custom Guitar Repairs
– Complete Set Ups
– Fret Work – Custom Wiring
– Nut/Bridge Fine Tuning and Replacement
32 Old Route 17 K
Montgomery, NY 12549 USA
Phone: (914) 457-5455 – Fax: (914) 457-3016
Established in 1979 * Electric and Acoustic Guitar Repairs
i have a ibanez ex series 6 string guitar. Need to find the price on it.
I have a EX360 myself…they are usually in the neighborhood of about $250-$350 any more. Any one have a wiring diagram for the EX series? I need to make some repairs and updates, but I want to make sure I don’t goof it up. If you have a diagram, or know hwere i can get one, please email me.
I have a EX360 myself…they are usually in the neighborhood of about $250-$350 any more. Any one have a wiring diagram for the EX series? I need to make some repairs and updates, but I want to make sure I don’t goof it up.
Hi, I can probably help if it is not too late… There is nothing earth-shattering about the wiring on my EX so let me know what controls you have on yours. Mine only has a p/u selector switch and one vol and one tone control for the H/S/H pu combination.
PS remove the /SPAM from my email address!
: I have a EX360 myself…they are usually in the neighborhood of about $250-$350 any more. Any one have a wiring diagram for the EX series? I need to make some repairs and updates, but I want to make sure I don’t goof it up.
: Hi, I can probably help if it is not too late… There is nothing earth-shattering about the wiring on my EX so let me know what controls you have on yours.
I just need to make sure I’m not getting the ground and hot for the jack mixed up. If my memory is correct the ground should be the outter section of the wire which would be the shaft of the plug and the hot should be the center of the wire which corresponds to the tip of the plug. Is this correct? Also does anyone know how to find out exactly which model ex one has? Mine was given to me in a slightly beat up shape and there’s no model number. Just says EX Series on the head. Thanks in advance for any help.
Hi, I can probably help if it is not too late… There is nothing earth-shattering about the wiring on my EX so let me know what controls you have on yours. Mine only has a p/u selector switch and one vol and one tone control for the H/S/H pu combination.
: I have a EX360 myself…they are usually in the neighborhood of about $250-$350 any more. Any one have a wiring diagram for the EX series? I need to make some repairs and updates, but I want to make sure I don’t goof it up.
I have one of the 1st produced, its my favorite axe. I downloaded a wiring diagram from the website a couple years ago, I had to go with the closest pickup and control configuration, it worked. I’m now in need of a new body, mine met with a nasty moving accident.
Anyonw know where I can get one?
I need a wireing diagram for a 1967 Harmony Metior guitar.Can anyone
help ? Please respond.
I’m looking wiring diagram for jazz bass’62
I’ve got a new active jazz bass can you put a switch on it to go from active to passive with the same pickups
: I’m looking Original Pick up Wiring for fender jazz bass 78
rgds
: I’m looking wiring diagram for jazz bass’62
Go to fender’s web site fender.com & select (Resources) then select (Mr. Gearhead) & select wiring diagrams, everythings in there… Monster . . .
I need the wiring diagram for a gibson epiphone bass guitar!It would be greatly appreciated if someone could help me.
Sincerely.
Mr.G
As the subject line indicates, I need the wiring diagram for a 2003 Ibanez 220qmbb… these jackasses at Ibanez.com have all the diagrams until 2002 and my guitar is not covered by any of the ax models they posted.
Thank you.
i need the electrical diagram of ibanez rg 270 please!!!!!
I need a bridge pickup for a Daion Mark XX. I would prefer an original if possible. But if not, does anyone know what to buy to get the original sound?
I also lack a switch used for coil-splitting on the Mark XX.
Per Gravesen
This popular thread has been given its own page : ibanez js wiring
: i want to know the wiring system in ibanez js series. can u tell me please? Also I am putting in a non-stock 5 way swith. It is a standard Ernoe Ball type ,not the Ibanez kind that came on the guitar.
: i want to know the wiring system in ibanez costom 540s series. can u tell me
Would like to have wiring diagram plus a schematic diagram of the 5 way switch.
Yours musically
Kenny
yes i wont to know the hot wire and do i just leave the other other wire not conected.i want to put it in a gibson explorer.the wires are 3 from pickup i dont know what model but it did come from a ibanez two humbucker style.i have red white and ground.do i put the red and white together.please help and f is on the back of one pickup and a r is on the other which one is the bridge thanks
i want to know if isstalling a activ picup ( emg ) for my rg7 is a good idea
i want to know the wiring system in ibanez js series. can u tell me
Hey does anyone know how to wire the tone control on this guitar….Its one of those double pots with 6 six legs…Its mean to add the bridge in when you push it down and be a tone control too..
Anyone know where i could get a wiring diagram…post here or email me.Cheers
im looking for the retail value of this guitar. its in very good condition.i have asked a few different music shops & no one can find it in any of there books. can you possibly help me? (it might be a custom built)
i also have a hondo guitar, hondo II HD 740 N.
í´ve the same problem!!!
i need the wire diagrams for the Washburn EA22 mod Nuno Bettencourt Platinum Edition , with the Equis II
So, no one’s got a wire diagram for this. I need it too.
need plated saddle for Daion Power Mark XX six-string electric.
George, I wonder if you can help me on this one?
Websites on this guitar, or maby wiring diagrams.
I can’t seem to find it on the net.
thanx
i Have one also and i can’t find any info on it on the internet. What were the woods used for the body, neck, fretboard. Does hondo still exist today as a company?
This popular thread has been given its own page : wiring diagram for Ibanez SA series
HER
http://www.ibanez.com/wiring/wire.asp?y=2004&w=SA1260
<span onmouseover="_tipon(this)" onmouseout="_tipoff()"><span class="google-src-text" style="direction: ltr; text-align: left">: HER : http://www.ibanez.com/wiring/wire.asp?y=2004&w=SA1260</span> : HER: http://www.ibanez.com/wiring/wire.asp?y=2004&w=SA1260</span>
Anyone who could help me out with a wiring diagram for an Ibanez SA series guitar or with advice on what may be causing the output from my guitar to be about half the normal (volume) would be greatfully recieved.
Hi
I need a wiring diagram for a Kramer pacer 1 volume, 2 tone, 1 5 position toggle and a mini toggle.
Thank you
: Hi
: I need a wiring diagram for a Kramer pacer 1 volume, 2 tone, 1 5 position toggle and a mini toggle.
: Thank you
Hello Forum,
I also need this wiring diagram, if anyone has it could you PLEASE send it to me.
Thanks.
Darryl Mittlestaedt
: Hi
: I need a wiring diagram for a Kramer pacer 1 volume, 2 tone, 1 5 position toggle and a mini toggle.
: Thank you
: : Hi
: : I need a wiring diagram for a Kramer pacer: 1 hum, 1 tone, 1 volume, and 1 3 position toggle (on-on-on)…
tank for u help
: : Hi
: : I need a wiring diagram for a Gibson SG, 2 tone, 2 volume and a 3 position toggle .
: : Thank you
do you have a diagram available for this peavey t-40 bass??
: do you have a diagram available for this peavey t-40 bass??thank u very much
: do you have a diagram available for this peavey t-40 bass??see what happend is the bass doesnt work so i open it up i noticed 2 toggles one of which was broken off what do the toggles do and what can i do to find new toggle or something to get it to work
: : do you have a diagram available for this peavey t-40 bass?
Thank you and more power
: : : do you have a wiring diagram available for this peavey t-40 bass?
: Thank you and more power
Ive been recently been rebuilding a cheap strat copy, and have run into problems with the electrics as whoever had it before me has messed it up big time!!
I really need some diagrams so i can sort the electrics out…
Thanks
PJ
Need tuning gear (key), whatever, for bass. Gear assembly is black.
I need to buy a new bridge for a Takamine acoustic guitar(The bar piece) Model# PSF49C Santa Fe
DESPERATE CAN ANYONE HELP
I AM A MAN WHO HAS HALF HIS PAYCHECK GO TO MY
"MENTALLY DISABLED" EXWIFE GODZILLA
I DO NOT HAVE A LOT OF FUNDS
CAN ANYONE HELP ME WITH MY GUITAR PROBLEM
I HAVE A HONDO RED HOLLOW BODY ELECTRIC GUITAR I BOUGHT 23 YEARS AGO
THE LOWER BRIDGE HAS SMALL BRASS PIECES IN IT THAT SUPPORT THE STRINGS
I LOST ONE OF THEM
I DO NOT WANT TO CHANGE THE BRIDGE
I JUST NEED TO KNOW WHERE I MIGHT BE ABLE TO FIND THIS LITTLE BRASS PIECE OR ALL SIX OF THEM OR HAVE ONE MADE
JERKS AT THE LOCAL GUITAR STORES SAY AHH I COULD PUT A GIBSON BRIDGE ON THAT BUT IT WOULD COST MORE THAN THAT GUITAR IS WORTH HA HA HA
I SAY YEAH WEL F U 2 I JUST WANT A LITTLE HELP NOT INSULTS
CAN ANYONE HELP
: DESPERATE CAN ANYONE HELP
: I AM A MAN WHO HAS HALF HIS PAYCHECK GO TO MY
: "MENTALLY DISABLED" EXWIFE GODZILLA
: I DO NOT HAVE A LOT OF FUNDS
: CAN ANYONE HELP ME WITH MY GUITAR PROBLEM
: I HAVE A HONDO RED HOLLOW BODY ELECTRIC GUITAR I BOUGHT 23 YEARS AGO
: THE LOWER BRIDGE HAS SMALL BRASS PIECES IN IT THAT SUPPORT THE STRINGS
: I LOST ONE OF THEM
: I DO NOT WANT TO CHANGE THE BRIDGE
: I JUST NEED TO KNOW WHERE I MIGHT BE ABLE TO FIND THIS LITTLE BRASS PIECE OR ALL SIX OF THEM OR HAVE ONE MADE
: JERKS AT THE LOCAL GUITAR STORES SAY AHH I COULD PUT A GIBSON BRIDGE ON THAT BUT IT WOULD COST MORE THAN THAT GUITAR IS WORTH HA HA HA
: I SAY YEAH WEL F U 2 I JUST WANT A LITTLE HELP NOT INSULTS
: CAN ANYONE HELP
i just got a hondo 732 delux and i need a bridge on the bottom i got this for free
hi, i need help with diagram connection of Kramer guitar, Pacer Custom 1, Humbucker, single, single, with 4 mini toggles.
Thanks, from Argentina, Gabriel
I would need Diagram for Gibson SG (hum + hum. So if you ever gonna get yours and fine mine can you share the one with me ? I will do the same for you if I will find your diagrams 🙂 Farewell my friend. Have lots of great time with your Kramer
PS. I really really like kramer guitars. My son had one.
Could anybody email me the telecaster electric diagram? Thanx very much
I’m building a guitar with 2 humbuckers, 1 volume, and 1 tone control. I was told that the wiring would be a combination of a tele and les paul set-up. Does anyone know where i can find diagrams for these 2 models or any other assistance? Thanks!
I am looking for dual humbucking wiring diagram for a Les Paul style guitar with two volume and two tone knobs. It is for 1975 model Hohner. Anybody out there know. Thanks!
Does anyone know how to re-wire a strat and add the switch to get the "Dick Dale" tone? I’ve got a ’63-’64 strat with original pickups, hot rod deluxe and Fender reverb unit. I know Dick uses a Showman, but I should still be able to get close.
I’ve ganged the middle and neck pickups, with the middle out of phase. It’s close, but not quite.
Any ideas???
Thanks, Kelly.
: Does anyone know how to re-wire a strat and add the switch to get the "Dick Dale" tone? I’ve got a ’63-’64 strat with original pickups, hot rod deluxe and Fender reverb unit. I know Dick uses a Showman, but I should still be able to get close.
: I’ve ganged the middle and neck pickups, with the middle out of phase. It’s close, but not quite.
: Any ideas???
: Thanks, Kelly.
Yo! fun…
i like it 🙂
John
<a href="http://www.toshain.com">painting</a>
This popular thread has been given its own page : Hondo Electric Wiring Diagram
I hapen to be replacing the wireing on a "Hondo II", is that what you have? If so, don’t follow the original diagram anyway, it never worked perfectly (unless mine was messed up by someone). Just find another diagram for one with similar pickups.
: As feeble as this may seem, i still must try. ANYONE OUT THERE that would have access or have an idea how to re-wire a Honda "Gibson" look-alike. It has four knowbs and one toggle switch towards the neck. I cannot find one serial nu,ber and I would really like to get this thing to work again LOL TY For any help i may recieve on this issue. Marcus
i got a hondo 2 guitar
ive been tryner find some1 else with 1
:
ive got a hondo II do you know the wiring diagram for one i have a few wires snapped and cannt figure out where they go, thanks joey
As feeble as this may seem, i still must try. ANYONE OUT THERE that would have access or have an idea how to re-wire a Honda "Gibson" look-alike. It has four knowbs and one toggle switch towards the neck. I cannot find one serial nu,ber and I would really like to get this thing to work again LOL TY For any help i may recieve on this issue. Marcus
This popular thread has been given its own page : wiring diagram for telecaster, humbucker and single coil?
I need a wiring diagram for this old guitar, I think it´s a Kingston , but im not sure if it has a single coil or a humbucke, it looks a little bit of both, also has one volume and one tone controls, please help.
: i need a wiring diagram for fender telecaster my friend has just made. MK standard series twin coil neck and bridge Humbucker pickups. Need guidance, please help!!!!!!!!
i need a wiring diagram for fender telecaster, i think its a albert collin’s model. it has top neck humbucker an single coil. please help!!!!!!!!
I need a Digram for I have minirail pickups one neck and one bridge 3 way switch each pickup has 5 wires the switch is a new type with circut board.Color code is black red white green and bare ground.thanks [email protected]
This popular thread has been given its own page : Wiring diagram for Ibanez Electric Guitar RG 340
i need two wiring diagrams for ibanez rg370.
pickup configuration is HB-S-HB with 5 way switch. & for esp LTD M-100 pickup configuration is HB-HB with 3 way switch
: i need the wiring diagram for an ibanez rg370.
: pickup configuration is S-S-HB with 5 way switch.
: i need a wiring diagram for a behringer v-tone guitar
: with 3 switches.
: I was just wandering if you have a diagram for the Rg 340 series of Ibanez Electric Guitars. It’s a 1-1-2 set up for the pickups from the neck. I’d appreciate any kind of help. I have not found this diagram anywhere on the net yet! If you have the wiring diagram I could really use it.
: : I was just wandering if you have a diagram for the Rg 340 series of Ibanez Electric Guitars. It’s a 1-1-2 set up for the pickups from the neck. I’d appreciate any kind of help. I have not found this diagram anywhere on the net yet! If you have the wiring diagram I could really use it.
that wasn’t very funny to make fnu of my name
I was just wandering if you have a diagram for the Rg 340 series of Ibanez Electric Guitars. It’s a 1-1-2 set up for the pickups from the neck. I’d appreciate any kind of help. I have not found this diagram anywhere on the net yet!
el brazo de mi guitarra ibanez ex se quebro y necesito saber en donde puedo comprarlo
Options for my bass, I don´t like the MEC pickups
Bartolini? EMG? Basslines?…..
Where can I find direct MEC replacement pickups, ASAP, for my Warwick Corvette Standard bass guitar? I need to order them and have them overnighted.
I would like to know if someone has a Ibanez EX series i would like to have a picture or wiring diagram for the guitar. I would be happy to exchange knoledge if someone helps.
:
: I would like to know if someone has a Ibanez HSS EX series i would like to have a picture or wiring diagram for the guitar. I would be happy to exchange knoledge if someone helps.
Does Anyone Have A Labelled diagram Of The Bass Guitar?
me is gotsd an EX series & its shit
If you think it’s shit, maybe it’s not the guitar and its the person playing it??
hello there, i’m trying to find how to install the pick up of my guitar ibanez EX series, i was cleaning and one cable red take out from i don’t know where, please respond me, thank you
For the EX series H/S/H models
the RG370 at http://www.ibanez.com/wiring is the same except for the capacitor on the volume pot.
I have a Ibanex ex series guitar i will give you a pic later
I have an old harmony guitar with two seperate pickups and 1 volume and 1 tone and I have looked all over the net to try to find a wiring diagram for it. could anybody help me?
:
: I would like to know if someone has a Ibanez EX series i would like to have a picture or wiring diagram for the guitar. I would be happy to exchange knoledge if someone helps.PLEASE HELP
:
: I would like to know if someone has a Ibanez EX series i would like to have a picture or wiring diagram for the guitar. I would be happy to exchange knoledge if someone helps.
I have a Ibanez Ex series Lefty. Its white with some scatches on it. One humbucker with 2 single coil pick ups. a 5 way switch, 1 tone knob and 1 volume knob. its a electric guitar
I have an ibanez ex series 5 string bass. I have been trying to find out how much it is worth since i bought it used email me and
: I have an ibanez ex series 5 string bass. I have been trying to find out how much it is worth since i bought it used email me and
from what i have seen they bring anywhere from $200-$250
:
: I would like to know if someone has a Ibanez EX series i would like to have a picture or wiring diagram for the guitar. I would be happy to exchange knoledge if someone helps.
I getting one this year black and with good pickups.
I have a ibanez xs series red all the parts are original exept for a pickup is a steel dmarzio
need wiring diagram for my hag its all rebuilt just need to wire it and plug it in can anyone help
This popular thread has been given its own page : Ovation tuning hardware
Help me:
I need ovation classic 1863 (nylon string super shallow body), the gold tuning machine. Any information?
thank you, alexis
I’ve a Ovation Classic 1863
$980
I need a web sight to buy a new gold key , my key just broke apart . thanks
Hi, George,
I’ve got a (1975?) Ovation Acoustic Model 1114-4 with a broken / bent knob on the tuning machine hardware. Ideally I’d like to replace the hardware. Would this be available through you? (I just need the parts — am working on restoring the guitar myself.) Cost? Hope to hear from you soon. Thanks!
Skip
I have an Ovation Legend 12 string with a broken headstock.
Can I purchase just the stock or do I have to buy a new neck?
Any info would be appreciated.
Thanks,
Lawrence
[email protected]
540-236-9263
Can somebody tell me if a tele can suffer the same problems as a strat when the strat pick ups are too high. On a strat, they need to be "staggered" in height; the bass side of the treble pick up being highest, the bass side of the middle pick up somewhat lower and the bass side of the neck pick up lowest of all….I know this to be true. (believe me, I learned the hard way…..by basically destroying a 1963 Blond Strat…..yeah,I know, it makes me sick too). Anyway; does the same thing apply to teles???????
Owitch! Can you replace just the body on the 1963 Blond Strat?? I know it won’t be the same, but at least the neck and pickups would have a nice home… grinz.. Jake
This popular thread has been given its own page : Fender Strat Wiring
: Hi, I have a strat style guitar (it’s actually a Fender Squire 2) that came with one bridge humbucker and two single coil pickups. I recently purchased two Fender Lace sensors and one Seymour Duncan Humbucker, along with all new pots, a new jack, and a new 5-way switch. I’m wondering if you would have any wiring diagrams on how I could wire this myself, or any instructions. Please let me know if you can help.
Hello, I need a Wiring diagram for one humbucker, two single coil, one volume and one tone…
Thanks you.
I have a mexican Strat. My problem is that i can not find any wiring schemes for humbucker on "the neck position".
if someone knows how to to this or can give me a clue or advice pleace give me a note, or send me a scheme or whatever.
thanks
: Hi, I have a strat style guitar (it’s actually a Fender Squire 2) that came with one bridge humbucker and two single coil pickups. I recently purchased two Fender Lace sensors and one Seymour Duncan Humbucker, along with all new pots, a new jack, and a new 5-way switch. I’m wondering if you would have any wiring diagrams on how I could wire this myself, or any instructions. Please let me know if you can help.
Hello, I have also recently aquired a Squire 2. Your squire 2 sounds just like mine. I have yet to see another like mine. Mine is white (ivory-pearl) has 2-single coil pickups and a bridge humbucker. It has a a whammy bar and the the tone and volume controls are the chrome knurled telecaster type but they are in a straight line towards the butt of the guitar and the patch cord input is in the butt of the guitar. On all other strats the controls are more horizontal
and the cord input is on the face of the guitar. Is yours like this? About the wiring on replacing the gear. It should
be just a matter of stare and compare if you are replacing the same type of single coil and humbucker pick ups. I saw a
site on the web last week that delt with strat wiring. Let me know if your guitar is like mine.
Thanks, Wayne
: : Hi, I have a strat style guitar (it’s actually a Fender Squire 2) that came with one bridge humbucker and two single coil pickups. I recently purchased two Fender Lace sensors and one Seymour Duncan Humbucker, along with all new pots, a new jack, and a new 5-way switch. I’m wondering if you would have any wiring diagrams on how I could wire this myself, or any instructions. Please let me know if you can help.
: Hello, I have also recently aquired a Squire 2. Your squire 2 sounds just like mine. I have yet to see another like mine. Mine is white (ivory-pearl) has 2-single coil pickups and a bridge humbucker. It has a a whammy bar and the the tone and volume controls are the chrome knurled telecaster type but they are in a straight line towards the butt of the guitar and the patch cord input is in the butt of the guitar. On all other strats the controls are more horizontal
: and the cord input is on the face of the guitar. Is yours like this? About the wiring on replacing the gear. It should
: be just a matter of stare and compare if you are replacing the same type of single coil and humbucker pick ups. I saw a
: site on the web last week that delt with strat wiring. Let me know if your guitar is like mine.
: Thanks, Wayne
3/27/02 I just found out my friend had a guitar and he sold it to me for 30 dollars. It turned out to be a Squire 2. Mine seems to be a little different than Wayne’s but it has the same single-single-double pick up arrangement. They are the original pick ups and probably need to be changed. Mine is in very "vintage" condition, and just about everything could use new parts. After buying the guitar I found out a saddle was broke. I have a few questions such as where can I cheaply get new saddles for this older type of guitar. I was also wondering about sanding it down. What kind of wood is it made out of. Could you also tell me how your upgrades turned out. Last, If you know a little history about this
guitar I would very much appreciate if you could share it with me because I’m kind of curious ’cause I have never heard of anything like a Squier 2. How much do you think this guitar is worth?
Please respond, and thanks for the time,
Jeff
: : : Hi, I have a strat style guitar (it’s actually a Fender Squire 2) that came with one bridge humbucker and two single coil pickups. I recently purchased two Fender Lace sensors and one Seymour Duncan Humbucker, along with all new pots, a new jack, and a new 5-way switch. I’m wondering if you would have any wiring diagrams on how I could wire this myself, or any instructions. Please let me know if you can help.
: : Hello, I have also recently aquired a Squire 2. Your squire 2 sounds just like mine. I have yet to see another like mine. Mine is white (ivory-pearl) has 2-single coil pickups and a bridge humbucker. It has a a whammy bar and the the tone and volume controls are the chrome knurled telecaster type but they are in a straight line towards the butt of the guitar and the patch cord input is in the butt of the guitar. On all other strats the controls are more horizontal
: : and the cord input is on the face of the guitar. Is yours like this? About the wiring on replacing the gear. It should
: : be just a matter of stare and compare if you are replacing the same type of single coil and humbucker pick ups. I saw a
: : site on the web last week that delt with strat wiring. Let me know if your guitar is like mine.
: : Thanks, Wayne
: 3/27/02 I just found out my friend had a guitar and he sold it to me for 30 dollars. It turned out to be a Squire 2. Mine seems to be a little different than Wayne’s but it has the same single-single-double pick up arrangement. They are the original pick ups and probably need to be changed. Mine is in very "vintage" condition, and just about everything could use new parts. After buying the guitar I found out a saddle was broke. I have a few questions such as where can I cheaply get new saddles for this older type of guitar. I was also wondering about sanding it down. What kind of wood is it made out of. Could you also tell me how your upgrades turned out. Last, If you know a little history about this
: guitar I would very much appreciate if you could share it with me because I’m kind of curious ’cause I have never heard of anything like a Squier 2. How much do you think this guitar is worth?
: Please respond, and thanks for the time,
: Jeff
Hey you guys, i have a 99 Squier Strat, (Affinity Series) and have done alot of work on it, For the guy who wants to know about what type of wood is used, its usually Poplar Wood. Squiers dont usually come with Ash or Alder bodies. I have Taken out the pickups and replaced them with Lace Sensors (Gold neck, Blue Mid , and Red Bridge) but have recently removed them to put in some of my own houndwound pickups (which sound better than any pickups ive used or have heard). My strat came with 500k pots (dont know why, came with single coils not humbuckers) but have noticed that i like the brighter, fuller sound of them as opposed to 250k pots. You can find wiring schems just about anywhere on the web if you search for them. I do have one question if anyone can help, on my pickup selector, there are 8 terminals side by side, rather than the Fender style with 4 poles on each side, how do i know or where can i get a diagram to follow to rewire and know which wire goes where? thanks, later.
: : Hi, I have a strat style guitar (it’s actually a Fender Squire 2) that came with one bridge humbucker and two single coil pickups. I recently purchased two Fender Lace sensors and one Seymour Duncan Humbucker, along with all new pots, a new jack, and a new 5-way switch. I’m wondering if you would have any wiring diagrams on how I could wire this myself, or any instructions. Please let me know if you can help.
: Hello, I have also recently aquired a Squire 2. Your squire 2 sounds just like mine. I have yet to see another like mine. Mine is white (ivory-pearl) has 2-single coil pickups and a bridge humbucker. It has a a whammy bar and the the tone and volume controls are the chrome knurled telecaster type but they are in a straight line towards the butt of the guitar and the patch cord input is in the butt of the guitar. On all other strats the controls are more horizontal
: and the cord input is on the face of the guitar. Is yours like this? About the wiring on replacing the gear. It should
: be just a matter of stare and compare if you are replacing the same type of single coil and humbucker pick ups. I saw a
: site on the web last week that delt with strat wiring. Let me know if your guitar is like mine.
: Thanks, Wayne
3/27/02 I just foiund oiut my friend had a guitar and he sold it to me for 30 dollars. It turned out to be a Squire 2. Mine seems to be a little different than Wayne’s but it has the same single-single-double pick up arrangement. They are the original pick ups and probably need to be changed. Mine is in very "vintage" condition, and just about everything coiuld use new parts. After buying the guitar I found out a saddle was broke. I have a few questions such as where can I cheaply get new saddles for this older type of guitar. I was also wondering about sanding it down. What kind of wood is it made out of. Could you also tell me how yoiur upgrades turned out. Last, If you know a little history about this
guitar I would very much appreciate if you coiuld share it woth me because I’m kind of curious ’cause I have never heard of anything like a Squier 2.
Please respond, and thanks for the time,
Jeff
looks like we’re all alike, i have a fender squire 2 with 2singles and 1 double hum. i haven’t added any new parts tho, honest;y, i’m happy wit what i have, but i was wondering how much better the guitar sounds wit new pickups, cause rite now i get this wierd buzzzzzzing noise when i dont touch the strings on my guitar with high distortion on for some reason. thanx. o yeah and if u guys need calling cards <a href="http://callingcardfrenzy.tripod.com">Calling Card Frenzy</a> is the place to go
: : Hello, I have also recently aquired a Squire 2. Your squire 2 sounds just like mine. I have yet to see another like mine. Mine is white (ivory-pearl) has 2-single coil pickups and a bridge humbucker. It has a a whammy bar and the the tone and volume controls are the chrome knurled telecaster type but they are in a straight line towards the butt of the guitar and the patch cord input is in the butt of the guitar. On all other strats the controls are more horizontal
: : and the cord input is on the face of the guitar. Is yours like this? About the wiring on replacing the gear. It should
: : be just a matter of stare and compare if you are replacing the same type of single coil and humbucker pick ups. I saw a
: : site on the web last week that delt with strat wiring. Let me know if your guitar is like mine.
: : Thanks, Wayne
: 3/27/02 I just foiund oiut my friend had a guitar and he sold it to me for 30 dollars. It turned out to be a Squire 2. Mine seems to be a little different than Wayne’s but it has the same single-single-double pick up arrangement. They are the original pick ups and probably need to be changed. Mine is in very "vintage" condition, and just about everything coiuld use new parts. After buying the guitar I found out a saddle was broke. I have a few questions such as where can I cheaply get new saddles for this older type of guitar. I was also wondering about sanding it down. What kind of wood is it made out of. Could you also tell me how yoiur upgrades turned out. Last, If you know a little history about this
: guitar I would very much appreciate if you coiuld share it woth me because I’m kind of curious ’cause I have never heard of anything like a Squier 2.
: Please respond, and thanks for the time,
: Jeff
The Information can be found at user.aol.com/kandyblu/private/wire.html and
http://www.christianmusicweb.com/Guitar_wiring.html
I hope that helps
Hi, I have a strat style guitar (it’s actually a Fender Squire 2) that came with one bridge humbucker and two single coil pickups. I recently purchased two Fender Lace sensors and one Seymour Duncan Humbucker, along with all new pots, a new jack, and a new 5-way switch. I’m wondering if you would have any wiring diagrams on how I could wire this myself, or any instructions. Please let me know if you can help.
im building a 7 single coil pickup guitar and i got one typical 2 wire single coil and 6 3 wire single wire pickups. im running every parallel with
seperate switches for each pick up and i cant get the 3 wire ones workin. they each got 2 hots for 2 dfferent coil connections and a ground, but
i cant get the damn things to work, i dunno whats wrong with the wiring, but i need some info on how to wire the damn
things so can someone pleeze help me?
thanx phil
hey guys
i have a epiphone les paul standard. the g string goes progressively sharper as a move up towards the body. i’ve already tried lenghtening the string using the fine tuning mechanism just behimd the pickups, but the string won’t get any longer. is there any special trick to solving this problem? please reply. -a
: hey guys
: i have a epiphone les paul standard. the g string goes progressively sharper as a move up towards the body. i’ve already tried lenghtening the string using the fine tuning mechanism just behimd the pickups, but the string won’t get any longer. is there any special trick to solving this problem? please reply. -a
: : hey guys
: : i have a epiphone les paul standard. the g string goes progressively sharper as a move up towards the body. i’ve already tried lenghtening the string using the fine tuning mechanism just behimd the pickups, but the string won’t get any longer. is there any special trick to solving this problem? please reply. -a
: : hey guys
: : i have a epiphone les paul standard. the g string goes progressively sharper as a move up towards the body. i’ve already tried lenghtening the string using the fine tuning mechanism just behimd the pickups, but the string won’t get any longer. is there any special trick to solving this problem? please reply. -a
I own a 1972 Japanese clone of a Fender Jazz Bass cerca 1965. The brand name on it is Cortley. I would like to buy an active pickup that will work in it because it has a weak output for today’s amps. Otherwise it has been a perfect performer for all these years, therefore well worth the upgrade. Is there such a thing as a replacement pickup for a 60’s Fender Jazz Bass and can you sell me one? Thanks. -Bruce
To Dennis,
I am a struggling young musician from Australia. Due to the ridiculouse price of descent guitars here (with the exception of Maton and the new Danelectro) I have decided to make my own with parts I have found lying around the joint.
At present I have a Telecaster body, an old Ibanez neck, a hotrails humbucker and a cheesy old single-coil.
My main problem is that I don’t know how to wire up the pickups to the three pots and three way pickup selector switch.
If there are any hints you can give me with this, or perhaps, if you know of some way of wiring these pickups so that I can get the broadest tonal range possible I would be very grateful.
Yours sincerely
ADRIAN
Adrian
Have a look at
http://www.chariot.net.au/~gmarts/index.html
I was looking for some info on wiring up pickups and found it here. This guys’s also from Oz
Mike O’Rourke, Manchester, UK
IN REGARDS TO WIRING;
IF YOU CAN. GO TO A WEB SITE CALLED GUITAR NUTS.COM THEY HAVE A LOT OF WIRING DIAGRAMS. I BELIEVE THAT WILL SOLVE YOUR PROBLEMS THEY ARE VERY IN DEPTH AND WILL TEACH YOU HOW TO SHIELD AND PROPERLY GROUND AND WIRE JUST ABOUT ANY BRAND OF BASS OR GUITAR ALSO CHECK OUT A WEB SITE CALLED ACTIVE BASS.COM THEY ARE
A GREAT RESOURCE FOR JUST ABOUT ANY THING TO DO WITH BASS. ALSO FOR GUITARIST CHECK OUT HOLE NOTE.COM.
GOOD LUCK AND TAKE CARE.
JOHN
How do I replace the nut on my Les Paul?
How do I remove the old nut?
How do I install the new nut?
Do I use glue?
If so, which type of glue?
Should I leave this job for the Pros?