Guitarsite Forums Guitar Discussion Guitar Someone help!!

  • Creator
    Topic
  • #22362
    Hawkeye337
    Participant

    i have a rg100 ibanez guitar and ever since ive had it ive been using .9 guage strings because everytime i try putting on a higher guage string, my tremolo bar gets pulled way the fuck off my guitar when i tighten the strings and its impossible to tune the strings without breaking the guitar.

    i know there must be some sort of secret to doing this…someone please tell me because i really want to use higher guage strings but i dont want to snap the tremolo bridge

    HELP!

Viewing 7 reply threads
  • Author
    Replies
    • #74511
      1bassleft
      Participant

      Cool post by Sultan 🙂 . The only other thing to add is that heavier guage strings may not sit in the nut properly. This is not as “ohmygod” as some people make out, but it can require an adjustment – especially if you think 10s are for you. A decent search will bring up more info, but always feel free to come back if you’d like more 😀

    • #74489
      glw
      Participant

      I hate changing strings. I usually go out and buy a new guitar instead.

    • #76003
      Hawkeye337
      Participant

      its amazing how you can be really good at playing the guitar….but not knowing a damn thing about how it works…like me for example. I can hardly change my strings….so thanks to all you guys for helping me out. Im gonna try to fix it and get back to you.

      THANKS!

    • #74474
      lee_UK
      Participant

      [quote=”Sultan.of.swing”]Changing strings always requires a few extra steps if you are increasing or decreasing gage. If you are going to use larger strings, remove the cover on the back of the guitar that hides the tremolo. You may have up to 5 springs inside that balance the tension of the guitar strings when tuned. I have a Jackson with a Floyd Rose that uses all 5 springs for maintaing proper height of the strings and the bridge.
      You will also notice there are two adjustment screws connected to the plate that pulls on the springs, that, when tightened, will stretch the springs. Sometimes it is sufficient to tighten these two screws and re-intonate the guitar, and you are done. You can get additional springs at any guitar store.
      The proper height to obtain is when the flat plate of the bridge is roughly parallel to the guitar face when all strings are in tune.
      Don’t forget, there are two other things you should at least check and adjust as necessry.
      One, the neck may bend a little more with heavier gage strings, and you can adjust the truss rod by tightening it a little. Go to the Stewart MacDonald site for info on adjusting a truss rod.
      Two, set up the intonation! It will probably need at least some minor adjustment.

      Good Luck![/quote]

      Nice one S.O.S, you see there is always someone out there that knows, i see its also your first post, welcome aboard.

    • #74483
      glw
      Participant

      [quote=”Sultan.of.swing”]Sometimes it is sufficient to tighten these two screws and re-intonate the guitar, and you are done.[/quote]

      You make it sound so easy. I’ve never been any good at setting intonation.

    • #74438

      Changing strings always requires a few extra steps if you are increasing or decreasing gage. If you are going to use larger strings, remove the cover on the back of the guitar that hides the tremolo. You may have up to 5 springs inside that balance the tension of the guitar strings when tuned. I have a Jackson with a Floyd Rose that uses all 5 springs for maintaing proper height of the strings and the bridge.
      You will also notice there are two adjustment screws connected to the plate that pulls on the springs, that, when tightened, will stretch the springs. Sometimes it is sufficient to tighten these two screws and re-intonate the guitar, and you are done. You can get additional springs at any guitar store.
      The proper height to obtain is when the flat plate of the bridge is roughly parallel to the guitar face when all strings are in tune.
      Don’t forget, there are two other things you should at least check and adjust as necessry.
      One, the neck may bend a little more with heavier gage strings, and you can adjust the truss rod by tightening it a little. Go to the Stewart MacDonald site for info on adjusting a truss rod.
      Two, set up the intonation! It will probably need at least some minor adjustment.

      Good Luck!

    • #74513
      lee_UK
      Participant

      I have an Ibanez S-Series with one of those trems, and i havent got a clue either, i think they are 9’s on there, and when i replace them i’ll use like. But that wont be until they go rusty, We used to have a member called Trevor, he was expert on those trems, try him on his e-mail [email protected] im sure he wont mind answering a simple question, let him know about this Guitarsite.

    • #74492
      glw
      Participant

      You’ll probably need to adjust the tremolo tension itself to compensate. This could mean adding an extra spring or something – I don’t know as I’m no expert, but it stands to reason that if you increase the tension of the strings, then that of the tremolo set-up has also to be increased.

      I think.

      Anyone else?

Viewing 7 reply threads
  • You must be logged in to reply to this topic.