Vintage Guitar Parts & Stuff

970 Comments / By /

Info, Help, Advise, Resources.. ALL-FOR-FREE!!!

970 thoughts on “Vintage Guitar Parts & Stuff”

  2. Epiphone Granada E444T Pickguard 1960s White
    Enri-KID

    I been looking for an Epiphone Granada E444T Pickguard 1960s White, it seems like they stop making these kinds of pickguards

    does anyone know where i can find one or is anyone selling one?!

    please email me if you have any info, it will be greatly appreciated it.

    thanks

    Reply
  3. Tone Knob Needed for 1965 Baldwin Vibraslim Guitar
    Anonymous

    I am looking for a tone knob to replace the one that is missing on my 1965 Baldwin. Thanks.

    Reply
  4. VOX Mark VI
    Peer

    Hi,

    I’ve got an old VOX Mark VI Special, unfortunately with a wrong neck. One in the row of preowners changed the original one to a ’70s-Strat neck … Anyway, I would like to reverse that conversion, maybe somebody can help.
    Looking forward to hearing from you! Thank you in advance!

    Kind regards,

    Peer

    Reply
  6. Eko Rio Bravo 6 Elektra 1975
    Raceodissey

    hi
    I’m finding a pickup for my Eko Rio Bravo 6 Elektra 1975 with his halfmoon metallic cover.
    Someone can help me?
    Thanks

    Reply
  7. Eko Rio Bravo 6 Elektra 1975
    Raceodissey

    I’m finding a pickup for my Eko Rio Bravo 6 Elektra 1975 with his halfmoon metallic cover.
    Someone can help me?
    Thanks

    Reply
  8. Teisco Parts
    Daveguy

    Hello,

    I’m about to begin restoring a Teisco TG-64. It needs a fair amount of work, but sourcing the parts is probably my biggest challenge.
    Other than Ebay, does anyone have any suggestions on where to look for the appropriate Teisco 4×2 tuners and tailpiece/tremolo parts or assemblies?

    Thanks,

    Dave

    Reply
  9. Baldwin 712
    Ian White

    Hi my name is Ian and I am looking for a Baldwin 12 string trapeze tailpiece or gust the letter “B” as I have the original tailpiece that is on the guitar. I bought my Baldwin 712 a few years ago and have dicovered that the “B” plate is missing so to bring it back to near original spec I need To find the “B” plate or find the full tailpiece I have the hard oblong case which is falling apart so anyone out there got the parts that I am looking for let me know.

    Reply
  10. WTB: Goya Rangemaster 12-String Tailpiece
    Connor

    I’m looking to buy an original tailpiece for a vintage Goya Rangemaster 12-string. Specifically, I’m looking for the harp-shaped one that spells out “Goya” in the middle. If anyone has one or knows where I could find one, please email me at [email protected]

    Tailpiece photo:
    http://i.imgur.com/A9V76dn.jpg

    Thanks

    Reply
    1. Rangemaster tailpiece
      Jim Freyler

      I’ve been looking for this tailpiece for years with no luck. Did you ever find one ? My Rangemaster has this generic looking Gibson tailpiece on it.

      Reply
  11. WANTED VINTAGE Jimmy Reed Thin Twin PICKUP
    Frank Swatek

    I have a vintage thin twin that is missing the neck pickup.

    Anyone out there want to sell me one ?

    Thanks !

    Reply
  13. Parts wanted for Baldwin 700 Series
    Anonymous

    Looking for all of the screws to hold the pickgaurd on a Baldwing 706 Sunburst… also a strap knob for the same guitar… also need a volume knob for a Red 704 (the knobs are different for the Red than for the Sunburst)…

    Thanx!

    Reply
  16. YAMAHA SF 700
    glenn

    !!WANTED
    Looking f!or bridge or other parts for Yamaha SF 700 Super Flighter. Hope someone can help.
    Thanks

    Reply
  17. parts for Harmony Rebel
    Steve Berryhill

    I am desperately seeking a functional wiring Harness for My 1970 Harmony Rebel…HELP!

    Reply
  18. Framus Camping King 12 string machine heads
    ddirtydogg

    Hi.
    I am looking for 2 Framus machine heads for a 1963 camping king 12 string. Anybody know of any?

    Reply
  20. Harmony h-75 pickup switch replacements
    Tyler Martin

    I’ve been looking to do a project using two pickup switches with a simple on/off function without being a micro switch or something like that. The best and really only example I can find is on vintage harmony h-75’s which has three on off switches that work like newer 3 way switches (like on les pauls, not telecasters). Does anyone know where i can find switches like these, even if only vintage ones? (I’m just looking for cheaper ones, not that vintage or non vintage is a priority)

    Reply
  21. 66 harmony rocket
    revabe

    I need tuners for this guitar got this guitar and it is missing the tuners and i can’t find any for sale?

    any ideas

    Reply
  22. Pick guard for Gibson ES120T
    Carl

    I’m looking for a pick guard for a Gibson ES 120T. Does anyone have one or know of one for sale ? Thanks

    Reply
    1. Pickguard for es-120
      Talafur

      Hi,
      Mine is also damaged, decided to restore by myself. However did you find any pickguard for sale?
      Thanks,

      Talafur

      Reply
      1. ES120T pickguard
        Anonymous

        I havent found one yet but I’m still looking. Most of the ES120’s I’ve reviewed have the same problem

        Reply
  23. 1955 Kay Guitar
    Garney

    I need one set-Tuning Keys, 6 eyelets, a pick guard w/ metal holder for 1955 Kay Guitar.

    Can anyone help?

    Reply
  24. 1956 national solid body electric
    chaz kirt

    looking for electronics and switch plate. also need neck nut serial # x60425 thanx

    chazmo

    Reply
  26. WTB 1959 Kay Swingmaster Tailpiece and Bridge
    Alex C.

    Just as the subject says. I found a 59 kay in a basement and i’m looking to restore bridge (rosewood archtop adjustabe) and tailpiece (trapeze)

    Reply
  29. WTB : Baldwin Bass Tuning Machines : 704_Vibraslim
    brian tourville

    WTB : Baldwin Bass Tuning Machines : 704_Vibraslim
    Van Ghent w/gear case covers?

    Reply
  32. WTB Framus Vibrato Trapeze Tailpiece
    Kenny Meeks

    Looking for a cast-quality Vibrato Tailpiece for my Framus Television. Or, a cheap/damaged guitar with one I could remove.

    Reply
  33. Framus Vibrato Trapeze Tailpiece
    Kenny Meeks

    Looking for a cast-quality Vibrato Tailpiece for my Framus Television. Or, a cheap/damaged guitar with one I could remove.

    Reply
  34. Wanted B25-12 Trapeze
    Grillbillie Lawrence

    I have a trapeze model B25-12 (twelve string) The trapeze broke.. Want repalce with a orignal piece. 617-512-0645

    Reply
  36. Machine heads for 80's Yamaha SG1000s
    chris

    Anyone have or know a good stockist of vintage parts for these? They did reissue the machine heads but it’s the originals I’m after, due to a breakage some years back.

    Thanks for reading.

    Reply
  37. late 60's hofner machine head bushings
    Tom Thompson

    need bushings for 68 hofner beatle bass machine heads. I found some early 70’s machine heads (same dimensions) but cannot find any bushings. Somebody must have some of these layin’ around from a broken or refurbished Beatle Bass. Any help would be greatly appreciated. Or if someone knows where I can get them custom made even

    Reply
  38. Yamaha SA 50 machine heads
    Lars Wedinger

    Hi, I have a 1968 Yamaha SA 50 in a beautiful condition. I need to replace 2 machineheads to make it mint. Any ideas where to find them?

    Reply
  39. yamaha sx60 body
    Mark Prohaska

    A few tears back I posted a message looking for parts for a vintage yamaha sx60. I still have the body minus all the hardware. If there is anyone out there intrested in a purchase or trade please contact me.

    Reply
    1. Yammy SX-60
      GT

      Hi Mark
      I’ve got a fair but nearly complete SX-60.
      Missing a pick guard and all the pots & switches are poked through a bit of gasket paper.

      PM me ..happy to discuss further.

      Cheers
      GT

      Reply
  40. Yamaha Parts
    Mike

    Hi, my name is Mike I live in British Columbia Canada and I’m searching for a few 60s Yamaha bass guitar parts. Please save this and read it later if you are busy at the moment. If you come by anything I’m searching for, or have a lead for me, please get back to me thanks, here’s my list. Yamaha SA 70, 1967 to 72. 1 vol/ tone knob, a pickguard or a tracing of one, and a suitable Japanese bridge cover or whole floating bridge from that era. I believe some had a string mute attached. See picture @ Yamaha Electric Guitar & Bass DATABASE. Next, Yamaha SB 55
    1967 to 72, all 3 knobs, a bridge cover, 111 mm hole spacing, and a thumb rest, any suitable Japanese parts would be great. See pictures @ CLASSIC BASS YAMAHA SB55. Please print this mail and keep it around, you may spot something. Please send this to everyone you know that is into vintage gear. Thanks ever so much from Canada. Mike

    Reply
    1. Re: 66-68 Vox Bobcat
      Little Lick

      : I ma looking for an original Vox bobcat guitar..
      : good condition.
      : intact. (no Mods)
      I have one. 3 pickups, trem, black, red, yellow burst. Needs bridge,one knob, trem arm,and one pu surround. Found all parts, haven’t ordered them yet.Might think about selling it. [email protected] let me know
      : thanks you.
      : [email protected]

      Reply
    2. Re: 66-68 Vox Bobcat
      Little Lick

      : I ma looking for an original Vox bobcat guitar..
      : good condition.
      : intact. (no Mods)
      I have one. 3 pickups, trem, black, red, yellow burst. Needs bridge,one knob, trem arm,and one pu surround. Found all parts, haven’t ordered them yet.Might think about selling it. let me know
      : thanks you.
      : [email protected]

      Reply
  46. Guild Bluesbird - Volume/Tone Knobs (Gold)
    Drew Davidson

    Does anyone know where I can pick up 1 x gold control knob for a Guild Bluesbird

    Reply
  47. P/u switch for Harmony Stratotone H46
    Bjarne Frang

    I have just bought off Ebay an early 60’s harmony Stratotone. It is in good condition for its age, but the p/u switch is missing. Does anybody know where I can find a replacement for it?

    Reply
  48. 73-74 GUILD S-100 ROLLER BRIDGE NEEDED!
    S.Handchild

    Hello everybody
    would anyone happen to have a roller brige for a 73-74 Guild S-100?I would be very grateful.Many thanks regards S.Handchild

    Reply
  49. National Duolian Cover plate
    Mick

    I am looking for a cover plate for a 34-35 National Duolian. This is a ribbed sieve hole cover plate. Please get in touch with details. Thanks

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *