I just saw three nylon string guitars with electrics. These were thin semi hollow bodys with spacing on the strings matching a classical neck. Built to play electric only, as there was not enough body to resonate well. didn't notice the make or the price. E mail me and I will get details if you are interested!

:i have been a guitarist since 1965. i have met many guitarist with awesome styles , however the day i first heard robin trower, was the day music ( for me anyway ), took on a whole different meaning. not only does robin take me to another level of appreciation, but he takes me to another planet !. he is not just a musician, but an artist who paints such graphic, emotional portraits with his music. thank you mr. trower. with much appreciation
john harter

Hmm.Try raising the action by adjusting the saddle height.If the action is too high,ask your guitar tech for 1.Neck setup or 2.Grind and polish.Buzzing can be a slight problem with older Strats(7 inch radius neck).If this the case, then try adjusting the string height to follow the curve of the neck.
Good Luck

Well, if you're using a gig bag you're lucky any of the strings are in tune, it's too easy to bump the machine heads through a soft case like that.

It's normal for a string to go out of tune eventually...especially if you do a lot of bending...does it stay in once you retune it?

: Hi guy's.
: I own a Epiphone Les Paul Standard. When I put it in the bag, and take it out on the next day, my 3rd string is a little bit out of tune. Also sometimes when I play, after playing for 5-10 min, i check the tune on my Boss GT-3 and it shows that the 3rd string is a little bit off, but if I wouldn't use that tunner, I wouldn't even hear the difference, because it's very slight.

: So......what is going on with my guitar? :-)
: Please help.
: Thanks.

I assume you are talking about the Mesa Boogie amp??? One of their models is a triple rectifier, there is a double rectifier also. It is a VERY expensive amp(s) but the tone is awesome.

: Ok what the hell is a rectifier and what does it do?

: Thanks in advance,
: Chris

is it a solid body? if it is a hollow body I dont know, but in a solid body it makes it sound a bit sharper, not too much. I've done it with my guitar, and worked well. But keep on searching for more answers...
Anyway, if you dont like the results, a luthier can restore the guitar... doesnt seem to be that problematic.

: Please send me an link to a guitar-pro-crack-site or
: : send me a crack

: : Thanx... in advance

http://www.mob.ru/g1.php if you go to this site you'll find

yo jorge:

it's not a complicated job as long as you have some soldering chops. these pickups are mounted directly on the pickguard (loosen completely or remove strings). remove the pickguard screws, carefully lift the pickguard - holding it near the guitar's body near where the jack is (here it's connected to the hot wire of the jack and the ground wire - try not to pull 'em out!) gently turn it over and you'll see the pickups, wiring, etc. You'll notice that each pickup is connected to a lug on the pickup switch and to the instruments "ground" (typically via the back of the volume pot). Carefully remove the wires for one pickup, replace it with the new pickup (see mfr's instructions for which wire goes to switch, etc.) If you go one-at-a-time wire-for-wire things should go smoothly. You may want to keep the three "ground" wires together for a one-group solder job to a ground point as a last soldering step.
I've had quite remarkable success with DiMarzio Virtual Vintage Strat pickups (heavy blues virtual vintage is my favorite model) I've put these in all my Strats!!
Good Luck.
Jay

: i was just wondering is it hard to replace pickups on a mexican strat. i know nothing about it at all.

Yeah, replace the pickups with high quality humbuckers switch to a higher guage string, and buy a very powerful all-tube amp. If you don't do these, it's just not gonna happen. The Squier's just aren't made to do that. Or you can cough up the cash for a Dimebag guitar. That's about the best you can do.

this can very simpely done! I have dime bags sound! Mesa boogie is the shit! get a triple rectifier and you will never buy another amp!.....if you cant afford one this is how you start to build the Pantera tone! goes like this...take out the shitty pickups you have and this is the most important thing you can do to get the TONE!!!! you buy a BILL LAWRENCE L-500XL bridge pickup and a SEMORE DUNCAN 59 for your neck pickup this is the set up that he uses the larence pickup is unbeliveable!!! high out put with no noise bill makes the best pickups i have lawrence pick ups in around 5 of my guitars... i also have dimarzio X2N's that rock and some early 80's super distortions...they rock but dimarzios are very noisy...the larence in the brige position L500-XL look up bill lawrence on line some people are selling pickup that are fake L-500XL...beware better to buy direct from bill Lawrence!!! and semore 59 in the neck! then get a sick tube amp like a boogie triple rectifier or a Soldano... if you cant afford those get the pick ups and a Boss GT-6 and spend a few hours tweeking the song out of it the presets suck!! or check out a rocktron voodoo valve last but not least get a hush noise reduction system and if you set it al up right you too.. can have dime's sound! IF you save up for a boogie amp you will have it forever!!!!! if you need more info on sond equipment i can help just email me at [email protected] I have had just about everything made for guitarist today!!! Good luck!!!

change the pick guard so that two humbuckers can fit it and place seymour duncen pickups on it. u know like the ones dime uses

: I think that Metallica has the rigth to protect their music. If you are in a car accident and get injured, a lawyer will get 40% of the settlement for just writting a couple of letters. While you did all the suffering. Is that fair.? Metallica makes their money from their music. I think to 300,000 fans are just cheap and they got what they deserv.